Refrigeration Spare Parts Dealers in Mumbai

Our Condenser is available in many dimensions and specifications. Also, it is extensively used for cooling, heating, condensation and evaporation in pharmaceutical and chemical industries.

We are one of the leading manufacturers and exporters of high capacity condenser based in india. The high capacity condenser that we offer is used for different purposes in varied industries. Our high capacity condenser is specially designed as per the latest designs with high capacity fiber suction to simultaneously condense the fine dust. The drives of high capacity condenser are rested on “v” belt pulleys for fan cage. Further, this high capacity condenser comes with a stripper roller for delivering the material. We provide this quality-tested high capacity condenser, at budget friendly prices in the markets. attributes user friendlylow maintenancesturdy structuredurable working life

The basic element of all thermostat controls, all the desirable features of the ideal thermostat – high sensitivity, wide adjustment range, small sized, rugged construction, vibration resistant, and low cost are included in this thermostat control. This unit may be inserted in a 15.875mm (58") reamed hole.If reamed hole is used; a short spline should be added this prevents thermostat from turning when the temperature adjusting sleeve.

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

Backed by rich industry experience, we are manufacturing and supplying Atmospheric Ammonia Condenser. These condensers are manufactured under the austere supervision of experts, utilizing advanced machinery following industry principles. Post-manufacturing, these products are scrutinized on certain factors of quality so as to guarantee their exactness. These condensers are obtainable with gas and fluid headers and water sprinkler pipes.   Features: Application specific design. High durability. Premium quality Advantages: These condensers are offered with gas and liquid headers and water sprinkler pipes Galvanized spray after fabrication Customized as per customer requirement We manufacture and fabricate different types of condensers too. Shell & Tube Ammonia Condenser Atmospheric Condenser Evaporative Plate Heat Exchanger (PHE)

  Refrigeration Parts  -   Barrium Ferrite Extrusion COLINES® is leader in the design and manufacture of complete lines for the production of magnetic gaskets for household, industrial refrigerators and freezers including lines for the production of soft PVC and magnetic profiles.The hallmarks identifying these machines are: - manufacturing quality of superior level - reliability over time - close liaison with worldwide recognized leading producers - more than 200 moulds and dies designed in the last few years - low energy consumption Welding machines - production of 30/40 pieces/hr - automatic trimming system for PVC gaskets welded at 90° Inserting machines - production of 1000 pieces per hour of 1 linear mt 

5 TR to 200 TR of induced draught forced draught design suitable for Freon & Ammonia design.Continuous serpentine coil made of seamless tube pneumatically tested to 375 psig, treated & zinc metallised.Tube axial fan with blades in Aluminium casting duly balanced for induced & blower for forced draught unit.

We are offering ammonia condenser. Size: 2200 height x 2100 width x 8000 long tube m.o.c.: sa-789 uns 31803 (duplex steel) size: o.d 25 x 2.3 thk x 6026 lg tubesheet m.o.c.: sa 266 gr.2 with sa 240 uns s31803 clad size: ø 1653 x 150 + 10 thk clad hydro testing: shell side- 45 kgcm2; tube side: 15 kgcm2 third party inspection: lloyd’s register asia

The new E-CLASS series in CX format, is the innovative range of products that Dixell has introduced on the market for both heating and L.T. and N.T. refrigeration. The E-CLASS family (32x74mm) is realized with the latest knowledge and technologies, software and hardware for a high standard of performance.       Reduced number of parameters, easy and intuitive programming mode Keyboard lock, alarm display Reduced mounting depth (only 50mm) Increasing temperature display delay (useful faction for display cabin Neutral zone management Compressor relay up to 1or 2HP (8A or 20A relay inside) Complete condensing unit management controller Decimal resolution (-9.9 ÷ 9.9), 2 digits Built-in gasket (IP65). Manual dial type thermometer for OEM requirement (Heat / Cool)

We are offering miniature thermostat. we are one of the foremost manufacturer, exporter and supplier of miniature thermostat (sn-9). The miniature thermostat (sn-9) provides high speed contact separation resulting in outstanding life cycle characteristics at electrical loads up to 8 amps. The miniature thermostat (sn-9) offered by us are well known for their reliability, compact size, versatile and cost effective design. sn-9 of utiliti controls is a product which is the smallest of disc thermostats. It is just 5mm x 14.5 mm in size. 100% factory inspected for continuity, function and contact resistance. Pps( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength. designed for single- and three–phase motors. Protects against overheating on all running conditions including: running overloads, increased ambient temperature, blocked motor ventilation, line voltage fluctuation, locked rotor, short circuit conditions etc. motor protection as a motor winding thermostat, the sn-9 can be mounted conveniently on the end turns of the motor windings. The small size and variety of available brackets afford flexibility in the method of attaching the thermostat. the hermetic construction allows the thermostat to withstand dipping and baking operations on the windings.   automatic and manual reset automatic or manual reset systems may be obtained using these thermostats with either manual or automatic type motor starters. When more than one motor winding thermostat is used, they should be connected in series so that the opening of any one thermostat will actuate the controller and shut down the motor. features small in sizehigh current carrying capacity of 10a at 230vresistant to shocks and vibrationssnap action dischigh thermal sensitivitylow costlong contact lifecompact, slim designavailable with without mounting bracket applications electrical heating padselectrical blanketswax heatersfood warmersmilk bottle warmersheat sink protectionother small applianceswater temperature controlbattery packsmedical equipmentdental equipment  rating maximum voltage : 230vacmax current( for non-inductive loads) : 8amax temp : 160 deg cmax operating cycles : 1,00,000 we also provide this model for inductive loads for bulk orders. characteristics dielectric strength : 1500 vac, rms, 60 cycles for 1 minute, terminal to caseambient temperature range : 10 deg, 15 deg, 20 deg, 50oc to 160ocdifferential : 15 deg, 20 deg, 40 degcontact resistance : 1250 vac, rms, 60 cycles for 1 minute, terminal to case, per mil-std-202, method 301dielectric strength : 5–2000 hz, 20g, per mil-std-202, method 204 condition d (unmonitored) (for high vibration applications, refer to the m1)vibration resistance : 100g, 6 milliseconds, per mil-std-202, method 213shock resistance configurations sn-9 comes in a standard m0 cover made up of aluminium mounting style m0 : without bracketp : pps bracket for surface mountingb : mild steel brackett : teflon wire crimped terminals the sn-9 comes with a stanndard terminal which can crimped to a wires : standard terminal selection code sn-9nc(8)110(3)100(5)sm0t70 temperature setting can be given as per requirement