U Tube Manometer Acrylic Body
Technical Specification : U Tube type Primary standard Manometer used for precision measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where certain accuracy is required. Avaliable Sizes : In Wall mounted & stand mounted. Ranges in mm : 50-0-50 to 250-0-250 mm.
...moreU Tube Manometer
U" Tube type Primary standard Manometer used for precision measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where certain accuracy is required.
...moreTubular Glass Level Indicator
Tubular Level gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication. Technical Specification : New Bolted Gland with teflon packing ensures positive leaktighnes for full vacuum as well as 10kg/cm2 pressure service. Sturdy Protection : Glass tube is protected by box section made out of two M.S.channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact. Light Weight : 75% less in weight compared to Reflex and Transparent liquid level indicators. Extraordinary strength but less bulky. Excellent Visibility : 16/19/25mm O.D Borosilicate glass gives excellent visibility. Surface tension effects are eliminated. Test Pressure : Full vacuum and/or 10 kg/cm² compressed Air
...moreTop Mounted Magnetic Level Indicator
Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Construction : The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, The guide pipe inserted in the tank, guide the float which follows the liquid level in the tank. The main magnet mounted on the the stem tip in turn follows the liquid level. Magnetic coupling between main magnet and follower magnet brings the visual indication of level outside. Follower magnet moves in an isolated glass tube filled with density compensating liquid. The entire construction is very sturdy keeping in view its outdoor installation. Applications : Dipstick substitute Underground tanks Horizontal tank Corrosive acids such as H2S04, RNO3 chlorosulphonic acid, oleum, acetic, CS2 Solvent tanks such as benzene, Acetone, toluene, alcoholic liquids or any organic liquid, butadiene, vinyl acetate, vinyl chloride. Liquefied Gases such as liquid chlorine, liquid ammonia, LPG Molten Sulphur Phosphorus, Lead etc.
...moreSingle Limb Manometer
Single Limb well type Direct Reading Manometer for the precision measurement of pressure, vacuum different pressure flow and liquid level measurement. Avaliable Sizes : In wall mounted and stand mounted. Range : • 0-100 to 0-500 • Acrylic Body ( CVG / SLM ) • Metallic Body ( CVG / SLMM )
...moreSide Mounted Magnetic Level Switch
This system has a side mounted flange. Float is fabricated out of the material suiting the service or fluid in the vessel When the level rises above the actuation point The float buoys up along with the level rise and actuates the magnetic switch which is kept inside the stem. The closure of the switch can operate a contactor or relay to indicate the level rise or decrease. Advantages : • Simple and proven Design, operates in most liquid. • Minimum maintenance and trouble free operation, Low cost of owenership Application : • High Low level signals for alarm Annuciation. • Safety interlock circuits Automatic Pump Control • Solenoid Value Control • Prevention of tank overflows. • Pump safegaurd against dry running.
...moreSide Mounted Magnetic Level Indicator
Simple Magnetic Principle used to get unique, Absolutely safe and most reliable level Indication for dangerous Liquids even under high pressures. Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top. Application : • Corrosive acids - oleum, H2SO4 • HNO3,Acetic. • Solvents - bezene, toluene, alcohols, CS2. • Liq. Gases - LPG, NH3, Chlorine. • Propylene, Butadiene. • Veg.Oils, Fuel Oils, Lubricants, Water • Poisonous / toxic liquids, DMA, TEA, PCL3.SO3 • Rotoball Option Accessories : High & Low level Alarm. Resistance Strip with 4-20 m Amp. output.
...moreMetal Tube Rotameter
Suitable for metering of translucent / opaque fluids under high operating pressure and temperature. Available Sizes : In 316 SS construction with flanged connections in line size from 20 NB to 100 NB Ranges : 100 to 60.000 LPH of water at ambient temprature. 2.5 to 1700 Nm³/hr of air at NTP. Accuracy : ± 2% of FSD & ± 1.5% of FSD on request.
...moreManometer U Tube
U" Tube type Primary standard Manometer used for precision measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where certain accuracy is required.Ranges:100-0-100 to 1000-0-1000mm WCHG.
...moreMagnetic Flow Meter
Low Flow Rotameter
Technical Specification : Suitable for purging or low flowrate measuring. The standard mounting is ¼" BSP rear, although several arrangement of flanged or hose pipe connections are offered on request. Ranges : 0.6 to 160 LPH of water at ambient temperature. 10 to 5000 NLPH of air at NTP.Accuracy:+ 2 FSD. Accessories : • Built in needle valve. • DP regulator. • Panel Mounting Clamps. • High & Low Flow Alarms.
...moreIndustrial Grade Metallic Body U Tube Manometer
"U" Tube type Primary standard Manometer used for precision measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where certain accuracy is required. Avaliable Sizes : In Wall mounted & stand mounted. Ranges : 100-0-100 to 1000-0-1000mm WC/HG.
...moreInclined Manometer
CVG solid acrylic body portable manometers are fabricated from 1 inch, Thick acrylic plastic solid block, vertially unbreakable stable and free of distortion. PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes provide with manometer.
...moreBypass Rotameter
Suitable for metering floe rates in 50 NB & above pipeline. Available in a variety of materials, carrier rings, impulse piping and rotameter as flow indicator. Available Sizes : 50 NB to 450 NB Ranges : 20 to 300 M³/hr of water 0.1 to 800 Nm³/hr of air at NTP Accuracy : ± 2% of FSD Accessories : Isolating Valves.
...moreAcrylic Manometer
CVG solid acrylic body portable manometers are fabricated from 1 inch. Thick acrylic plastic solid block, vertially unbreakable stable and free of distortion. PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes provide with manometer.
...moreAcrylic Body Rotameter
Technical Specification : Suitable for inline installation with flanged or screwed connection with several options of materials for wetted parts. Avaliable Sizes : 15 NB to 100 NB Ranges : 2.5 to 40,000 LPH of water at ambient temperature. 0.1 to 300 Nm³/hr of air. Accuracy : +2% of FSD Accessories : High & Low Flow Alarms.
...moreAcrylic Body Inclined Manometer
CVG solid acrylic body portable manometers are fabricated from 1 inch. Thick acrylic plastic solid block, vertially unbreakable stable and free of distortion. PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes provide with manometer. Ranges : 10 mm wg to 200 mm wg.
...moreWater Flow Meter
Single Jet Plastic Meter
Be first to Rate
Rate ThisOpening Hours