Laboratory Presses Dealers in Delhi

• Power: Hydraulic
• Condition: New
• Usage: Stamping and pressing
• Features: Rust proof, Easy to operate, Strong construction

• Manufacturer: : Cooper
• Model:: CRT-GYR-EN

Gyratory compaction is considered to be one of the best methods of laboratory compaction for theassessment of compactibility and the manufacture of test specimens. Compaction is achieved by the application of a vertical stress (normally 600KPa) via end platens to aknown mass of asphaltic mixture within a 100 or 150mm internal Ø mould. The longitudinal axis of themould is rotated (gyrated) at a fi xed angle to the vertical whilst the platens are kept parallel and horizontal. During compaction the height of the sample is automatically measured and both the mixture density andvoid content calculated. The compaction data is shown on-screen in graphical and tabular format ascompaction progresses and it is also saved in Microsoft Excel™ compatible format. The operator canchoose whether to compact for a certain number of gyrations or until a target mixture density or voidcontent is achieved. Problems with existing compactors are mainly related to build quality and ease of use. Unlike mostcompactors 100 and 150mm Ø moulds can be tested without changing machine parts. A fi lled gyratorycompactor mould is heavy and often very hot. In many cases these moulds have to be lifted in and out ofgyratory compactors. With the CRT-GYR-EN no lifting of fi lled moulds is required. They are automaticallylowered into position for compaction and then lifted up again for transfer to the integrated demouldingsystem. KEY FEATURES• Complies with EN 12697-10 and EN 12697-31• Can be confi gured to comply with SHRP Superpave specifications• Automatic mould insertion and retraction• 150mm and 100mm internal Ø moulds can be tested without changing parts• Cold mix (emulsion) materials can be compacted and the expelled fl uid collected• USB link with data acquisition and control system so that desktop can be used as host computer• User friendly LabVIEW™ software displays results in real time• Compaction data stored in Microsoft Excel™ compatible format• Machine calibrated with traceable equipment• Option for mould up to 300mm high KEY USES• Compaction of asphaltic paving material to atarget mixture density or void content• Assessment of mixture compactibility• SHRP Superpave asphalt mixture design• Preparation of cylindrical test specimens

This instrument is built to SHRP & US Federation Highway Administration specifications. It produces asphalt specimens that best predict long-term pavement performance. The SHRP Superpave™ program uses specimen height from each gyration during the consolidation cycle as the basis for asphalt mix design.

Tincture Press : (1399) Extra heavy duty for making tinctures, decotious infusion etc. cap. 1 Lit. stainless steel disc, with screw drive, stainless steel mesh as inner perforated vessel with stop cock.

Catering to the needs of the clients, we provide Laboratory Vacuum Press. Our Laboratory Vacuum Press is manufactured using cutting-edge technology and high-grade components. The Laboratory Vacuum Press comprises of user-friendly laboratory sized system designed and built by oxy-gon industries. Moreover, our Laboratory Vacuum Press has stainless steel chamber with hot-pressing capabilities at high temperatures and pressures. Features Maximum operating temperature : 2000oCChamber pressure : 2. 0 psig to 10-7 psigAtmosphere : Vacuum, inert gas or nitrogen, reducing gas such as 6% or less hydrogen in 94% argon or nitrogenHeat zone : 4" Diameter x 8" high; tungsten mesh elementHydraulic system : Rated for 5 ton pressing

Extra heavy duty for making tinctures, decotious infusions etc. cap. 1 Lt, stainless steel disc, with screw drive, stainless steel mesh as inner perforated vessel with stop cock.

• Voltage: 220 V/380 V
• Brand: GCTS/Avantech
• Frequency: 60 Hz
• Power Source: Electric
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)

Permanent Mounting of metallography specimen for correctpolishing results. • Helps polishing small specimens & edge retention. • Reliable hydraulic jack with pressure gauge. • Mould heater fast cooling (airwater), timer; buzzer facilities, automatic cycles. • Electronic auto auto off.

Our company is one of the renowned manufacturers, traders and exporters of a broad spectrum of Laboratory machinery such as Hydraulic Lab Press. We manufacture our laboratory equipment in total compliance of the international quality norms. Our hydraulic machines are widely acclaimed for the features like high performance, easy to install and low maintenance cost. These machines are extensively used in different research organizations. Specific Features: Dimensionally accurateSuperior performance Low maintenance cost Easy to install.  

Automatic metallography specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.   Technical specifications: Diameter of specimen: Ø25mm, Ø30mm, Ø40mm, Ø50mm 2. Power supply: 220V, 50Hz 3. Max. power consumption: 1800W 4. Setting range of system pressure intensity: 0-2MPa (corresponding preparing pressure intensity: 0-72MPa) 5. Temperature setting range: 0-300 ºC 6. Heat preserving time: 0-99m99s 7. Dimensions: 615 × 510 × 500 cm 8. Net weight: 110Kg 9. Cooling method: water cooling

Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development. These compact presses are engineered to provide vibration free operation with low noise and requires minimum maintenance.

Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development. These compact presses are engineered to provide vibration free operation with low noise and requires minimum maintenance.

specimen mounting press, IZOD IMPACT TESTING MACHINE

Hydraulic Lab Press, Hydraulic Hot Press for Plywood Multi Daylight 650 Ton

Metrex Laboratory Hydraulic Press, MHP-10, High Temperature Tube Furnace

Tincture Press, herbal machinery, Pharmaceutical Machinery, Control System

Laboratory Vacuum Press, Hydraulic Die Lifter, Power Factor Control Panel

specimen mounting press, geography lab equipment