Logic Controllers Dealers

Allen Bradley PLC Along with 20 Digital Inputs & 12 Digital Outputs Product Description The Allen-Bradley® MicroLogix™ 1400 from Rockwell Automation complements the existing MicroLogix family of small programmable logic controllers. MicroLogix 1400 combines the features you demand from MicroLogix 1100, such as EtherNetIP, online editing, and a built-in LCD, plus provides you with enhanced features, such as: higher IO count, faster High Speed CounterPTO and enhanced network capabilities Take advantage of the built-in LCD with back lighting to set the Ethernet network confi guration, display fl oating point values on a user confi gurable display, display OEM logos at startup and read or write any binary, integer and long fi le elements in the data table. Three embedded communication ports provide you with excellent communications capabilities. MicroLogix 1400 off ers an isolated RS232C RS485 combination port; a non-isolated RS232C port; and an RJ-45 port for 10100 Mbps EtherNetIP peer-to-peer messaging, DNP3 over IP and Modbus TCPIP protocol. Similar to the rest of the MicroLogix family, MicroLogix 1400 is programmed with RSLogix 500 programming software (Version 8.1 and above) as well as RSLogix Micro programming software.

SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%

Bulletin 1785 PLC-5® programmable logic controllers (PLCs) offer flexibility in programming, network, and I/O. Designed for larger sequential and regulatory control applications with specialized I/O requirements, PLC-5 control systems bring together existing and new systems through networks such as EtherNet/IP™, ControlNet™, and DeviceNet™. Embedded network ports in PLC-5 controllers enable connectivity to a wide range of devices including MicroLogix™, SLC™ 500, CompactLogix™, and ControlLogix® controllers, letting you expand your control system without additional training investments.Features Reliability with a Mean Time Between Failure (MTBF) rating that exceeds 400,000 hours 6 K words through 100 K words user memory Backup options: ControlNet" Hot Backup module provides control of outputs if the primary controller shuts down PLC-5® Backup Communication module helps increase the fault tolerance of systems controlling I/O on a remote I/O link I/O support: Monitor and control I/O across ControlNet, DeviceNet", and Universal Remote I/O links Forcible I/O ranges from 512 through 3072 I/O Maximum remote I/O locations ranges from 5 through 125 Communication ports: On-board ports for DH+, Universal Remote I/O, and RS-232-C/RS-422-A/RS-423-A communication Ethernet or ControlNet dual-media ports included on some controllers Separate modules provide additional communication ports

We are the leading Manufacturer and Supplier of top quality PLC System (S7-400). Our each PLC System (S7-400) has been precisely designed to give the best and inventive system solutions to our clients. The construction and engineering of PLC System (S7-400) has been done by using high quality raw materials. Latest technologies have been used to make our product of superior quality and high performance. Hardware Within the controller family, the PLC System (S7-400) is designed for system solutions in the manufacturing and process automation. The product range comprises 9 Standard CPUs, 2 failsafe and 2 high available CPUs. Features Safety technology and standard automation can be integrated into an S7-400 controller; the plant availability can be increased by the redundant set-up of the S7-400.The power of the S7-400 is scalable thanks to a graded range of CPUs; the capacity for I/O is almost unlimited. The power reserves of the CPUs enable new functions to be integrated without further hardware investment, e.g. processing of quality data, user-friendly diagnosis, and integration into higher-level MES solutions or high-speed communication via bus systems.The PLC System (S7-400) is used preferably to coordinate overall plants. It is also used to control lower-level communications lines with slave stations; this is guaranteed by the high communication power and the integral interfaces.The S7-400 is especially suitable for data-intensive tasks in the process industry. High processing speeds and deterministic response times guarantee short machine cycle times on high speed machines in the manufacturing industry. The high-speed back plane bus of S7-400 ensures efficient linking of central I/O modules.The S7-400 can be structured in a modular way without any slot rules; there is a widely varied range of modules available for both centralized configurations and distributed structures. The configuration of the distributed I/O of the S7-400 can be modified during operation. In addition, signal modules can be removed and inserted while live (hot swapping). This makes it very easy to expand the system or replace modules in the event of a fault. The storage of the complete project data including symbols and comments on the CPU simplifies service and maintenance calls.Many of the S7-400 components are also available in a SIPLUS version for external environmental conditions, e.g. extended temperature range (-25 to 60oC) and for use where there is aggressive atmosphere/condensation.

Programmable logic controller (PLC) is a control system using electronic operations. Its easy storing procedures, handy extending principles, functions of sequential/position control, timed counting and input/output control are widely applied to the field of industrial automation control. Delta's DVP series programmable logic controllers offer high-speed, stable and highly reliable applications in all kinds of industrial automation machines. In addition to fast logic operation, bountiful instructions and multiple function cards, the cost-effective DVP-PLC also supports various communication protocols, connecting Delta's AC motor drive, servo, human machine interface and temperature controller through the industrial network in to a complete "Delta Solution" for all users.

We offer wide range of PLC’s Scada and Servo. Our products are famous for excellent function, high durability with excellent power back up.Our PLC’s are robustly designed besides flexible. They have features like easy affordability and control.Our Servo has following features such as dimensionally accurate, user friendly, highly resistive and competitive price. Scada have unique features such as high memory capacity and best quality. PLC offers following features: Robust design Flexible Affordable Easy control Servo offers following features:   Dimensionally accurate User friendly highly resistive Available at reasonable rates. Scada offers following features: Assures quality assurance High memory capacity

AEAB Pvt.Ltd is a Siemens certified System House. All our Engineers engaged on Design engineering & Commissioning activities are trained at par  with  Siemens in house team under the coaching of same faculty. Our team of Engineers  is  trained  & experienced  to handle diversified needs of the Process Industry. Our success rate  is 100% in meeting the Automation needs of the Industry. Some of the important features of our activities are  ​​ Customized Configuration provided to meet user specific need. Support customer in System sizing/selection w.r.t., Hardware. We offer Industry specific Automation solution by using Advance Process Library e.g., for 1. Paper Mills 2. Steel rolling Mill 3. Cement Plant 4. Captive Power Plant 5. Water Management Solution 6. Hydro Carbon Industry In addition, our in house, Siemens trained COMMISSIONING  ENGINEERS do plant commissioning , support  trouble shooting.