This is used specially for MIG Welding. This set comprises of three phase - 415V Input Supply, wire feeder, CO2 assembly and MIG Torch. Following models are available in this:
A: RM400: This is suitable for up to 1.2 mm MIG Wire,
A: RM600: This is suitable for up to 1.6 mm MIG Wire.
This is used specially for MIG Welding. This set comprises of three phase - 415V Input Supply, wire feeder, CO2 assembly and MIG Torch. Following models are available in this:
A: RM400: This is suitable for up to 1.2 mm MIG Wire,
A: RM600: This is suitable for up to 1.6 mm MIG Wire.
Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
Following are the different models available:
A-HQTS5: This is portable oven suitable for up to 5 kgs electrode and comes with temperature controller thermostat.
Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
Following are the different models available:
A-HQTS5: This is portable oven suitable for up to 5 kgs electrode and comes with temperature controller thermostat.
Used as a medium for supplying power from a welding machine to the work being done.
ISI approved.
Available in both aluminium and copper conductor in sizes ranging from 16 mm2 to 120 mm2.
Both copper and aluminium cables are available in TRS as well as HOFR insulation.
Moulding process, used to manufacture these cables, ensures longer life of cable.
Used as a medium for supplying power from a welding machine to the work being done.
ISI approved.
Available in both aluminium and copper conductor in sizes ranging from 16 mm2 to 120 mm2.
Both copper and aluminium cables are available in TRS as well as HOFR insulation.
Moulding process, used to manufacture these cables, ensures longer life of cable.
Used to carry gases from cylinders to their place of use.
ISI approved.
Highly durable.
Non-porous which prevents loss of valuable gas.
Separate hose is available for LPG and Oxygen gas and the same should not be interchanged.
ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.
Used to carry gases from cylinders to their place of use.
ISI approved.
Highly durable.
Non-porous which prevents loss of valuable gas.
Separate hose is available for LPG and Oxygen gas and the same should not be interchanged.
ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.
Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.
Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.
Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
Inverter technology is a voltage conversion system which applied to welding makes compact power sources with low energy conversion. This rectifier is suitable for both TIG as well as Electrode welding. Following are the models available:
Inverter technology is a voltage conversion system which applied to welding makes compact power sources with low energy conversion. This rectifier is suitable for both TIG as well as Electrode welding. Following are the models available:
Used to hold electrode during the welding process.
Available in two types:
Fully Insulated (A-Type),
Semi Insulated (B-Type).
Three varieties are available in both these types:
Mark-I (600A30%): Suitable for all size of electrode,
Mark-II (400A30%): Suitable up to 4.0 mm electrode,
Mark-III (200A30%): Suitable up to 3.15 mm electrode,
Other than the above, two more special varieties of holders are available:
Heavy Duty Holder (used for heavy duty welding),
Rubber Grip Screw Type Holder.
Used to hold electrode during the welding process.
Available in two types:
Fully Insulated (A-Type),
Semi Insulated (B-Type).
Three varieties are available in both these types:
Mark-I (600A30%): Suitable for all size of electrode,
Mark-II (400A30%): Suitable up to 4.0 mm electrode,
Mark-III (200A30%): Suitable up to 3.15 mm electrode,
Other than the above, two more special varieties of holders are available:
Heavy Duty Holder (used for heavy duty welding),
Rubber Grip Screw Type Holder.
We provide aluminium TIGMIG rods and wires with high levels of purity.
These are available in straight lengths of 1 mtr. or spools weighing 7 kgs. approx. All the straight lengths are embossed with grades.
Different grades are available as per requirement of the client:
G1B1050: This is pure aluminium (99.97% aluminium) and is used for welding of aluminium and aluminium constructions.
NG214043: This is aluminium alloy with 5% silicon and is used for welding AlSi alloy with Si content up to 6%
NG24047: This is aluminium alloy with 10% silicon. This is high fluidity material with good finish and strong joints.
NG65356: This is aluminium alloy with 5% magnesium and is used for welding of AlMg alloys for container, automobiles industry and ship building.
We provide aluminium TIGMIG rods and wires with high levels of purity.
These are available in straight lengths of 1 mtr. or spools weighing 7 kgs. approx. All the straight lengths are embossed with grades.
Different grades are available as per requirement of the client:
G1B1050: This is pure aluminium (99.97% aluminium) and is used for welding of aluminium and aluminium constructions.
NG214043: This is aluminium alloy with 5% silicon and is used for welding AlSi alloy with Si content up to 6%
NG24047: This is aluminium alloy with 10% silicon. This is high fluidity material with good finish and strong joints.
NG65356: This is aluminium alloy with 5% magnesium and is used for welding of AlMg alloys for container, automobiles industry and ship building.
Used as a medium for supplying power from a welding machine to the work being done. Available in both aluminium and copper conductor in sizes ranging from 16 mm2 to 120 mm2. Both copper and aluminium cables are available in TRS as well as HOFR insulation. Moulding process, used to manufacture these cables, ensures longer life of cable.
Used as a medium for supplying power from a welding machine to the work being done. Available in both aluminium and copper conductor in sizes ranging from 16 mm2 to 120 mm2. Both copper and aluminium cables are available in TRS as well as HOFR insulation. Moulding process, used to manufacture these cables, ensures longer life of cable.
Used during TIG welding.
These torches also come with neoprene rubber hose.
Also special focus is given to spare parts to ensure their longer life as well as their regular supply.
Following are the models available:
Used during TIG welding.
These torches also come with neoprene rubber hose.
Also special focus is given to spare parts to ensure their longer life as well as their regular supply.
Following are the models available:
These are used for gas welding. These are suitable for following purposes:
Gas Welding with Oxy - Carbide Gas
Gas Welding with Oxy - DA Gas
Gas Welding with Oxy - Hydrogen Gas
Gas Welding & Heating with Oxy - LPG
Brazing with Oxy - LPG Hydrogen Coal Gas
These are used for gas welding. These are suitable for following purposes:
Gas Welding with Oxy - Carbide Gas
Gas Welding with Oxy - DA Gas
Gas Welding with Oxy - Hydrogen Gas
Gas Welding & Heating with Oxy - LPG
Brazing with Oxy - LPG Hydrogen Coal Gas
These have same uses as rubber hose.
These have same uses as rubber hose.
Light in weight: Weight of TPR hose is around 150 gm per meter as against 300 gm per meter of rubber hose.
TPR hose is more flexible than rubber hose
TPR hose has more bursting pressure than rubber hose because of double braiding in it.
It is suitable for following welding situation:
Overhead Welding
Circular Cutting
These have same uses as rubber hose.
These have same uses as rubber hose.
Light in weight: Weight of TPR hose is around 150 gm per meter as against 300 gm per meter of rubber hose.
TPR hose is more flexible than rubber hose
TPR hose has more bursting pressure than rubber hose because of double braiding in it.
It is suitable for following welding situation:
Overhead Welding
Circular Cutting
Used to carry gases from cylinders to their place of use.
ISI approved.
Highly durable.
Non-porous which prevents loss of valuable gas.
Separate hose is available for LPG and Oxygen gas and the same should not be interchanged.
ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.
Used to carry gases from cylinders to their place of use.
ISI approved.
Highly durable.
Non-porous which prevents loss of valuable gas.
Separate hose is available for LPG and Oxygen gas and the same should not be interchanged.
ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.
Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
Suitable for cutting ferrous metal sheets and plates in straight direction.
Can also be used for circular cutting using circular cutting attachment provided with the machine.
Curved surface of the body provides ample cooling space for drive motor and also prevents spatter from sticking to the surface.
Suitable for cutting ferrous metal sheets and plates in straight direction.
Can also be used for circular cutting using circular cutting attachment provided with the machine.
Curved surface of the body provides ample cooling space for drive motor and also prevents spatter from sticking to the surface.
These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
These have same uses as rubber hose.
These have same uses as rubber hose.
Light in weight: Weight of TPR hose is around 150 gm per meter as against 300 gm per meter of rubber hose.
TPR hose is more flexible than rubber hose
TPR hose has more bursting pressure than rubber hose because of double braiding in it.
It is suitable for following welding situation:
Overhead Welding
Circular Cutting
These have same uses as rubber hose.
These have same uses as rubber hose.
Light in weight: Weight of TPR hose is around 150 gm per meter as against 300 gm per meter of rubber hose.
TPR hose is more flexible than rubber hose
TPR hose has more bursting pressure than rubber hose because of double braiding in it.
It is suitable for following welding situation:
Overhead Welding
Circular Cutting
Used in welding of Stainless Steel.
Available in straight lengths of 1 mtr. or spools weighing 12.5 kgs. approx. All the straight lengths are embossed with grades.
Different grades are available as per requirement of the client:
201,
304L,
ER-308L,
ER-309L,
ER-310,
316L,
ER-430,
ER-347.
Used in welding of Stainless Steel.
Available in straight lengths of 1 mtr. or spools weighing 12.5 kgs. approx. All the straight lengths are embossed with grades.
Different grades are available as per requirement of the client:
201,
304L,
ER-308L,
ER-309L,
ER-310,
316L,
ER-430,
ER-347.
These torches are manufactured indigenously. These are used during MIG Welding process.
'ARCON' torch comes with neoprene rubber hose instead of PVC hose (which is currently used in most of the cables). Neoprene rubber is more resistant to heat and hence ensures higher flexibility and longer life.
Also these torches have been made with special focus on spare parts to ensure their longer life. Also we ensure that there is regular supply of spare parts of these torches.
These torches are manufactured indigenously. These are used during MIG Welding process.
'ARCON' torch comes with neoprene rubber hose instead of PVC hose (which is currently used in most of the cables). Neoprene rubber is more resistant to heat and hence ensures higher flexibility and longer life.
Also these torches have been made with special focus on spare parts to ensure their longer life. Also we ensure that there is regular supply of spare parts of these torches.
Used to regulate the pressure of gas in cylinder during welding, cutting and heating processes.
Made especially from forged brass.
In this series, there are two types of regulators:
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Comes with German make 'WIKA' pressure gauges which are highly accurate.
Used to regulate the pressure of gas in cylinder during welding, cutting and heating processes.
Made especially from forged brass.
In this series, there are two types of regulators:
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Comes with German make 'WIKA' pressure gauges which are highly accurate.
Safety devices which are used with pressure regulators and gas cutter to prevent back-flow of gas.
Available for both gas cutter and pressure regulators.
Allows gas to flow only in one direction and prevents it from flowing in reverse direction.
Safety devices which are used with pressure regulators and gas cutter to prevent back-flow of gas.
Available for both gas cutter and pressure regulators.
Allows gas to flow only in one direction and prevents it from flowing in reverse direction.
Used with LPG gas cylinder especially for industrial purposes.
Following models are available:
Without Gauge
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Used with LPG gas cylinder especially for industrial purposes.
Following models are available:
Without Gauge
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Reviews & Ratings
Write a Review
Post Free Ad