Phase Sequence Corrector Dealers

(14 products available)
  • Premium
    Automatic Phase Sequence Corrector +2

    Automatic Phase Sequence Corrector

    100 - 10,000 / Piece

    • MOQ1 Piece
    • Current TypeAC
    • ConditionNew
    • ApplicationIndustrial
    • FeatureHeat Resistance, High Performance
    • Number Of FlowerPhase Sequence Corrector
    • Total Carbohydrate1Year
    • Country of OriginIndia
    • Brand NameSupreme International
    • Automation GradeAutomatic
    • **Experience Uninterrupted Power with the Supreme ACCL**   In main supply mode, the Supreme ACCL ensures a seamless flow of power to your load, providing uninterrupted operation. Should the generator supply mode activate, its advanced electronic circuitry will diligently oversee the load and current levels.   If the current surpasses the preset threshold for a duration of 7-8 seconds (T1), the current limiting mechanism will temporarily halt the power supply for a pre-defined interval (10-30 seconds (T2)). Following this, it will promptly restore the power supply, resuming its vigilant monitoring of the load current. This entire process will then repeat. The overload limiter's lockout cycle can be tailored to your preferences, ranging from 5-10 cycles, providing an additional layer of customization.  Ensure your operations stay powered, seamlessly transitioning between main supply and generator modes. Trust in the Supreme ACCL for an uninterrupted power supply experience.
    ...more
    www
  • Three Phase Sequence Corrector

    Three Phase Sequence Corrector

    13,500 / Piece

    • MOQ01 Piece
    • MaterialPhase Sequence Changer
    • Usage/ApplicationOffices, Factories, Industrial Area
    • BrandBS
    • PhaseThree Phase
    ...more
  • Phase Sequence Correctors

    Phase Sequence Correctors

    Get Price Quote

    3 phase equipments viz. Lift, Motors, compressors, process machines, Air conditioners run when the 3 phases are connected in the right sequence( RYB ) & the phase angle of 120° between each phase is maintained. In case the phase sequence changes the motor tends to rotate in the reverse direction. In case of Lifts, Air conditioners, or other process machines the  load will stop functioning because of inbuilt protection & these  equipments resume only when the sequence is corrected manually. In case of 3 phase UPS ( Uninterrupted Power Supply) the UPS starts functioning on the battery mode & drains the batteries even when the power is available but only the sequence changes, effects battery life  & lowers battery life. By installing the ARIES Electronic Auto Phase Sequence Corrector all these problems donot occur under any circumstances irrespective of any sequence in the input. In the case of 3 phase UPS, due to wrong sequence, the input supply will be cut and it starts working in the battery mode resulting in discharge of battery. SWIFT – ELECTRONIC AUTOMATIC PHASE SEQUENCE CORRECTOR always gives an output 3 phase supply in the right sequence and maintains 120° between phases, even if the input sequence is interchanged. Thus all the 3 phase equipments continues to run irrespective of the change in input phase sequence.   RYB sequence is maintained. No manual control Fully automatic operation   9A to 200A    
    ...more
  • Automatic Phase Sequence Corrector

    Automatic Phase Sequence Corrector

    Get Price Quote

    We are offering automatic phase sequence corrector. It automatically corrects the phase sequence r y b at the out piut terminal so that motor connected will always get the correct phase and will rotate in the right direction.
    ...more
  • Automatic Phase Sequence Corrector

    Automatic Phase Sequence Corrector

    Get Price Quote

    We are engaged in offering Inline make Automatic Phase Sequence Corrector that is capable of managing three phase loads. Automatic Phase Sequence Corrector, that we provide, saves downtime of equipment part losses and production loss. We make available precision engineered Automatic Phase Sequence Correctors that are used in motors, lifts and three phase loads.
    ...more
  • Automobile Sheet Metal Beam Correction Device

    Automobile Sheet Metal Beam Correction Device

    1,460,000 / piece

    • MOQ1 piece
    • Brand NameZOIL
    • Country of OriginIndia
    • BENCH LENGTH5200mm
    • BENCH WIDTH2120mm
    • WORKING HEIGHT520
    • POST MAX.PULLING TENSION8TONS
    • PNEUMATIC PRESSURE RANGE0.8MPa
    • POST WORKING RANGE360 DEGREE
    • MAX LIFTING RANGE3500KG
    • Main Features Unilateral tilting hydraulic lifting platform makes it simple for the vehicles to drive on. The material is rectangular tube together with flat plate platform and numerous station: holes is convenient for fixing any tools. The working range of pulling towers is 360°. Simple operation. Streamline clamps can fasten almost all various damaged vehicles. High-precision measurement system can be easily used to perform the dimension measurement on the car, control body size and the same as the original cars. Impeccable after deals administration ensures for clients' fulfillment.
    ...more
  • AUTOMATIC PHASE SEQUENCE CORRECTOR FOR 8 TON/ 18 KW / 20HP

    AUTOMATIC PHASE SEQUENCE CORRECTOR FOR 8 TON/ 18 KW / 20HP

    100 / Piece

    • MOQone Piece(s)
    • PHASE SEQUENCE CORRECTOR FOR 8 TON/ 18 KW / 20HPFOR 8 TON/ 18 KW / 20HP
    • suitable for correcting the ryb phase sequence, whenever the sequence is changed or reversed. It automatically corrects the phase and allow to run the 3 phase motorcompressor to run in right direction. • for three phase ups, during sequence changed or reversed, ups will start use the battery power & battery may become empty within hours • 3ph air conditioner will be tripped off, due to sequence reversal & the entire office will be suffering or disturbed because of ac failure • avoid damages during phase sequence changes or reversal • no break downs of lifts, ups, machineries, 3 ph. Air conditioner or any motors or 3-phase system due to any change in sequence. Suitable for 3 phase- lifts, ups, air conditioners, motor, pumps, machineries up to rating of -8 ton 18kw 22.5kva20hp motor pump it automatically corrects phase sequence so that output is always in the right sequence(r,y,b) , hence motor will run in right direction microcontroller based system, loaded with negative sequence correction technology. No manual intervention automatically corrects phase sequence ryb. Phase sequence indicator and controller. Heavy duty phase reversal changeover
    ...more
  • Phase Sequence Corrector +3

    Phase Sequence Corrector

    Get Price Quote

    Phase Sequence Corrector automatically corrects the phase sequence in case the phase gets reversed or changes.No damage on motor in case of phase reversal. The sequence corrector will switch off, during the single phasing or imbalance voltage occur & later, auto-reset after restoration Features : Automatically corrects phase in case of phase reversal or .(Indication provided) Prevents accident due to reverse rotation of motor shaft. Protects motor from single phasing(Indication provided) Protects motor from low voltage and high voltage.(Indication provided) Load will be given on motor after 1 minute time delay to increase the life of motor(Indication provided) Protects motor from unbalance voltage(Indication provided) Auto/Manual switch provided Space of timer provided Type GIC FM1 Timer switch provided Light weight Maintenance free Three phase indicator RYB
    ...more
  • Phase Sequence Corrector Device

    Phase Sequence Corrector Device

    6,000 - 100,000 / Piece

    • MOQ1 piece
    • Frequency50 - 60 Hz
    • Voltage3 Phase 415V AC
    • PhaseThree Phase
    • IP RatingIP68
    • Automation GradeAutomatic
    • Mounting TypeWall Mounted
    • Output Power7.5-200 HP
    • Automatic GradeAutomatic
    • Surface FinishPowder Coated
    • Body MaterialMS
    • InputPH1, PH2, PH3
    • OutputR, Y, B
    • LoadFrom 5 HP to 100 HP
    • PSC is a device which corrects the input phase sequence automatically under the condition when is changes from MAINS resulting running of motor in right direction only.   Different models from 7.5HP to 100HP are available.
    ...more
  • AUTOMOBILE SHEET METAL BEAM CORRECTION DEVICE MODEL TF-8000

    AUTOMOBILE SHEET METAL BEAM CORRECTION DEVICE MODEL TF-8000

    1,460,000 / piece

    • MOQ1 piece
    • Brand NameWREN
    • ConditionNew
    • ApplicationAutomotive Use
    • FeatureBest Quality
    • Number Of FlowerAutomotive Sheet Metal
    • Country of OriginIndia
    • ShapeRectangular
    • BENCH LENGTH5200MM
    • BENCH WIDTH2120MM
    • WORKING HEIGHT520MM
    • POST MAX PULLING TENSION8 TONS
    • PNEUMATIC PRESSURE RANGE0.8MPa
    • POST WORKING RANGE360 DEGREE
    • MAX LIFTING WEIGHT3500Kg
    • G WEIGHT2200Kg
    • Main Features Unilateral tilting hydraulic lifting platform makes it simple for the vehicles to drive on. The material is rectangular tube together with flat plate platform and numerous station: holes is convenient for fixing any tools. The working range of pulling towers is 360°. Simple operation. Streamline clamps can fasten almost all various damaged vehicles. High-precision measurement system can be easily used to perform the dimension measurement on the car, control body size and the same as the original cars.Phase Sequence Corrector Impeccable after deals administration ensures for clients' fulfillment.
    ...more
  • MAESTRO AUTOMATIC PHASE SEQUENCE CORRECTOR

    MAESTRO AUTOMATIC PHASE SEQUENCE CORRECTOR

    Get Price Quote

      This is a panel which performs vital functions related to three phase electrical supply. Maestro Phase sequence corrector is used widely for three phase electrical equipments at places where sometimes the phases (R-Y-B) are interchanged from the electrical panel or the electrical board. Due to this problem many three phase equipments suffer faulty operation. The power scanner in the PSC senses the changing of phases and indicates such failure. Then the contactor comes into working and this device automatically corrects the sequence of the three phases with immediate effect in fraction of a second, hence giving uninterrupted operation of the three phase equipments it has been applied on. These functions are indicated through LED indicators. These heavy duty equipments comes with the wiring terminals so that its application is easy and hassle free. These equipments come in various ratings ranging from 25 Amp. to 800 Amp. Features:- Three Phase Online Ups Three Phase Air Conditioning Plants ( Ductable and Split Units) CNC Machines Critical Medical Equipments Delicate IT Equipments Offset Printing Machines Tele Communication Systems Escalators and Elevators Defense Equipments
    ...more
  • Automatic Phase Sequence Corrector

    Automatic Phase Sequence Corrector

    Get Price Quote

    Automatic Phase Sequence Corrector, Servo Transformer, Automatic Phase Change
  • Phase Sequence Corrector

    Phase Sequence Corrector

    Get Price Quote

    Phase Sequence Correcto
  • Phase Sequence Corrector

    Phase Sequence Corrector

    Get Price Quote

    Phase Sequence Corrector, AC Panel Repairing Service, AC DRIVE REPAI
Filter by Locality
top