Plastic Injection Moulding Machine Dealers in Delhi

• Condition: New
• Uses: Injection Molding Of Plastic Products
• Automation Grade: Automatic
• Special Features: Equipped With Electrical & Hydraulic Safety Interlocks

We offer a wide array of vertical plastic injection molding machines, which are in high demand in the markets. Specially designed, these vertical plastic injection molding machines are also equipped with electrical & hydraulic safety interlocks. We also provide customized plastic injection molding machines as per clients ' specifications

We are offering plastic injection moulding machine.we are reckoned as one of the prominent manufacturers and exporters of plastic injection moulding machine. Our plastic injection moulding machines are perfect for heavy-duty industrial applications. Plastic injection moulding machines, offered by us, are ideal combination of speed and performance. features high speed low pressure moulding facilityexcellent performance low maintenanceeasy installation and operation used for designing plastic injections with desired specifications specifications modelpmpl -70pmpl-100pmpl-200pmpl-400pmpl-600pmpl-1000pmpl-2000pmpl-3000screw diamter mm3538455257657590shot weight g.p polystrains gms75110215425625107521003150injection stroke- suck back mm105 +20140+20175+20230+20280+20370+20410++20510+20plasticizing capacity kg/hr173035456090120140injection pressure kg/cm221102050200019001900174017001600screw ld ratio ratio1818181818202020screw revolution rpm0-2500-2500-2250-2200-2100-2000-1950-190clamping force tons5080120165210315380450clamping stroke inch914161820263035mm. Max mould th. Range inch5 x106x148x158x169x1812x2214x2414x30tie bar diamter inch2.5333.545.255.56platen dimension inch17x2120x24.522x26.524x3028x3337x4040x4443x54dist between tie bar h xw inch10x13.512x1614x1814.5x20.517.5x22.523x2625x2928x37hydraulic pump motor hp510202525404050screw motor hyd.hyd.hyd.hyd.hyd.hyd.hyd.hyd.hyd.heating capacity hp3.56.58.59.75111618.522total load hp/kw8.5 /616.5 /1328.5/22.534.75/27.536/28.556/4458.5/4672/56.5oil reservoir capacity ltr.200400500600700100012001400approx. Floor lxwxh ft.12.5 x3.5x615x6x617x6x719x6x8.520x6x822x7.5x825x8x828x8x8approx. Weight kgs25004200600070008000150001900023000

ALL RANGE OF JAPANESE USED INJECTION MOULDING MACHINES AVAILABLE FOR SALE. FOR FURTHER INFORMATION PLEASE CONTACT US OR VISIT US:- www.simranmachines.com PRABHJOT SINGH +918527885219

Bring-forth a wide Gamut of Plastic Injection Moulding Machine, specifically made in India, we, Indian Machine Mart, are active in the market as a largest exporter of Industrial Machines to serve International clients at the most reasonable rates. Offered moulding machine has a wide usage in varied industries for making automotive parts, medical equipment, electrical & electronic components, caps & closures, technical parts, and writing instruments. Comprising an injection unit, clamping unit, hydraulic system, and control unit, this machine makes plastic products by utilizing injection moulding technique. Available in varied models with different production capacity, offered range of plastic moulding machine can be availed from us at competitive price. Incorporated with highly efficient and noiseless hydraulic pump system, offered machine is considered as one of the most energy efficient Injection Moulding machines, which further achieves long term productivity and offers environmental compatibility. This machine available in a series of model with varied specifications is built with high quality components to ensure reliable and long term functionality. Moreover, its automatic mould height adjustment saves both the cost and time of the user while changing the mould for making particular product. Additionally, its hydraulic system helps in uniform and precise movement of the machine as well as transfers greater forces. Additional details: Optimum rigidity Short locking time High opening force Requires small space for installation Low power consumption Advance operating system Long run working capacity

• Storage Condition: Horizontal
• Country of Origin: 220V
• Power: 1-3kw
• Material: Plastic
• Capacity: 1 to 50 ton per day
• Operation Mode: Automatic
• Clamping Way: Hydraulic

• Model Number: 3 color push button operated
• Uses: Motorcycle handle grip cover in multi colour
• Brand Name: Hydrotech Engineering works
• Material: Pvc
• Packaging Type: Customized
• Condition: New
• Power: 5 kw

Motorcycle handle grip cover making machine  Semi automatic push button operated  5 hp motor  1 year warranty 

• Uses: Plastic Injection Machines
• Advantages: Dynamic Servo Motors, High Precision Movement

KRS series robots, together with the knowledge of HKTM, experience of 20 years and advanced technology, have been designed for plastic injection machines Thanks to their proven software, KRS series robots minimize the impact duration of robots on the cycle duration by moving in synchronization with all the movements of your injection machine. Advantages Thanks to the dynamic servo motors, high precision linear movement components and engineering of Bosch Rexroth, KRS series robots are able to keep their pace and positions for each cycle at pick and place, insert placement, IML (in-mould labelling) and quality assurance applications. With their internationally accepted software base, they complete the machine as they can be integrated accurately and easily into all plastic injection machines with their internationally accepted software base, they complete the machine as they can be integrated accurately and easily into all plastic injection machines and applications.and applications. Servo motors with absolute encoders are used in all of the axes and this allows for the robot to remember its position in case of a power outage, thus preventing waste of time. In the robotic axes where racks are used, the noise during the movement is kept optimal using helical racks. The proven rail trolley group used in the robots provide correct movements thanks to accurate movements and maximum rail trolley wear times. Thanks the torque control present in all three axes (X Free), damage towards the robots’ axes as it picks the products is prevented.

• Operation Mode: Automatic
• Capacity: 150 to 200
• Plastic Type: PP
• Structure: Horizontal
• Power(w): 36 KW
• Phase: Three Phase
• Payment Terms: T/T (Bank Transfer)/Other

• Vertical Injection Machine: Molding Machine

Specifications: model tm-150 injection Unit screw Diameter mm 22-26 injection Pressure kgfcm2 1625-1164 injectio Capacity cm3 34-47 injection Weight gr 39-55 oz 1.4-1.9 injection Rate ccs 28-39 screw Speed r.p.m 0-150 screw Stroke mm 90 nozzle Stroke mm 120 nozzle Contact Force tf 2.4 clamping Unit clamping System -- hydraulic clamping Force ft 15 clamping Strke mm 200 max Mould Space mm 240 min Mould Height mm 40 overall Size of Platens(hxv) mm space Between Columns(hxv) mm 310x310 hydraulic Ejector Force ft 0.7 ejector Stroke mm 28 electrical Equipment drive Motor kw 2.2(3hp) heater kw 2 diemension m 1.2x0.9x2.3 weight t 0.6 shipping Size m 1.4x1.1x2.25 shipping Weight t 0.75 oil Tank Capacity l 90 cooling Water lhr 400-600

• Plastic Type: Asian Plastic
• Operation Mode: Automatic
• Capacity: 1 to 50 ton per day
• Model Number: SM450V
• Clamping Way: Mechanical

The machine embodies a hydraulic system designed to meet the requirements of Indian standards Specification 516-1959 for compression tests on cement mortar cubes up to 7.06 cms. The hydraulic jack of 500 KN capacity is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by upward movement of lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by three phase 440 volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm dia, dial hydraulic pressure gauge with 250 division i.e. 0-500 KN X 2 KN. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an Angle for easy readability. The machine is fitted with hand wheel control which enables the rate of application of load to varied. The machine is equipped with the facility of Hand Pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will stop and would not re start unless the starting switch is operated. Complete with our own calibration certificate for pressure gauge with National Traceability. ·         The Machine can be supplied with NCCBM Calibration certificate at an extra cost. ·         The Machine can also be supplied with 2 or 3 pressure Gauges of 100 KN, 250 KN and 500 KN for testing lower strength cubes or smaller size cubes. Optionally, the machine can be supplied with digital load indicator and load cell in place of Pressure Gauge at an extra cost.

• Condition: Used
• Plastic Type: PP, PE, PA
• Operation Mode: Automatic, Semi-Automatic
• Structure: Vertical
• Clamping Way: Hydraulic, Mechanical
• Features: Less maintenance, Sturdy construction, Easy installation

Fully Automatic Horizontal Plastic Injection Moulding Machine

Vertical Plunger Type Plastic Injection Moulding Machin

Plastic Injection Moulding Machine, Chemical Plants, PVC Drift Eliminato

Used Plastic Injection Moulding Machine, Injection Moulding Machin

Semi Automatic Plastic Injection Moulding Machin

Semi Automatic Plastic Injection Moulding Machin

Plastic Injection Molding Machin

Plastic Injection Moulding Machine, Injection Moulding Machin

Plastic Injection Moulding Machin

Plastic Injection Moulding Machin

Plastic Injection Molding Machine, Injection Molding, Plastic Component

Plastic Injection Moulding Machin

Plastic Injection Moulding Machin

Plastic Injection Molding Machine, Plastic Machine

Plastic Injection Molding Machine, Injection Molding Machin

Plastic Injection Molding Machine, Servo Motor Injection Molding Machin