Scientific Instruments Dealers in Anand Parbat, Delhi

Viscosity is the property of the fluid by which it resists flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil. Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice. The apparatus consist of bath with cup of 10 mm or 4 mm orifice and sleeve stirrer with ball lifting clip and ball .The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws. Suitable to operate on 220 V.50 Hz, AC single phase. The following accessories and consumables are not part of the standard supply and are mandatory for the testing work   Thermometer IP 8C/9C/10C Spare silver plated orifice cup 4mm. Measuring Cylinder 100 ml. Stop Watch Mechanical/Digital Solvent (Benzene/Toluene)for cleaning

We are manufacturer & exporter of Vernier Callipers Handy tool for Inside, Outside and depth measurement. For More Details Contact us.

We are the leading manufacturer of various industrial type Automatic Voltage Regulator, we are engaged in providing a wide quality range of voltage stabilizer, which is widely used with various electrical and electronic applications.

• Brand Name: VENUS ENGINEERING INDUSTRIES
• Material: Stainless Steel
• Color: White
• Model Name/Number: Hydraulic Analog Dynamometer
• Usage/Application: Industrial
• Capacity: 15 Tone Capacity
• Weight: 18 Kg
• Dial Gauge Diameter: 6 inch
• Body Material: Mid Steel
• Hook: Forged Eyehook

• Phase: Single Phase
• Display Type: Digital
• Model Name/Number: Kems Rectifier
• Brand: Kems
• Usage/Application: Industrial
• No of Digits Display: 4-6

• Frequency: 50 Hz
• Power Source: Electric
• Material: Thick Steel
• Brand Name: Steco
• Usage: It used to test standard viscosity of bitumen or petroleum
• Phase: Single Phase
• Measuring Cylinder Size: 100 ml

• Type: Thermo Anemometer
• Material: Abs
• Weight: 100gm
• Application: Dew Point Temprature, Humidity
• Display Type: Digital
• Power: 12V, 24V
• Power Source: Battery
• Range: 0 To 1500 W/m²
• Colour: Yellow

Mini Thermo Anemometer, offered by us, is used for measuring air velocity, temperature, and wind chill. Our Mini Thermo Anemometer measures temperature from 0 to 122oF (-18 to 50oC) with selectable averaging function of 5, 10, or 13 second intervals. Further, we are a distinguished Manufacturer, Exporter, and Supplier of Mini Thermo Anemometers. Attributes Data hold to freeze most recent display Selectable averaging function of 5, 10, or 13 second intervals Measures from 0 to 122oF (-18 to 50oC)

Product Code: EKE 2105AIMTo find out dryness fraction of steam by combined separating and throttling calorimeter.Product DetailsThe steam passing out from separating calorimeter may still contain some water vapour , in it . in other words it may not be absolutely dry . again , in a throttling calorimeter steam after passing through the throttle valve must be superheated or at least dry saturated . this limits the extent of dryness fraction that can be reliably measured , depend up on the pressure of steam in the main steam pipe . if a sample of steam, which may be still wet after passing through the throttle valve i.e it will not be superheated . thus under this condition the throttling calorimeter fails to enable us in determining the value of dryness fraction of steam . to overcome this difficulties we make use of separating and throttling calorimeter . first the steam is passed through separating calorimeter where itlosses most of it’s moisture and becomes comparatively drier, it is than passed through the throttling calorimeter where super heating takes place with out changr of total heat . the temperature and pressure of steam after throttling are measured by using a thermometer and manometer respectively.DescriptionThe set up consist of a separating and throttling calorimeter . a steam generator is provided at the base of the apparatus . a thermostat knob is provided at the front of apparatus to control the temperature inside the steam generator . steam from steam generator is passed from separating calorimeter where most of the water partical get separated from steam and then passed to throttling calorimeter where steam get superheated . after that superheated steam passed through heat exchanger to condense the steam.Saparating CalorimeterIt consist of two concentric chamber , the inner chamber ,and the outer chamber . which communicates with each other through an opening at the top. As the steam discharge through the metal baskets ,which has a large number of holes , the water partical due to there heavier momentum get separated from the steam and collected in the chamber. The comparatively dry steam in the inner chamber moves up and than down aging through the annular space between the two chambers and enters the throttling calorimeter .Throttling CalorimeterIt consist a narrow throat . pressure and temperature are measured by manometer and thermometer . the steam after throttling process passed through the heat exchanger and condensate is collected .Utilities Requried Water Supply 3 lit/min (approx) Drain Electric supply : 1phase , 220 V A.C , 2Amp. Steam table for calculation Space required : 1.0 m X 1.0 m

We are regarded as one of the foremost exporters, suppliers and manufacturers of Digital Voltmeters from India. We offer a wide range of digital voltmeters made from premium quality material and using the latest technology for accurate reading and performance. We offer customization of these digital voltmeters based on the application they are needed for. Our digital voltmeters stand out for their precision, ease of installation and maintenance.   Details : Being the leading brand in the market we are engaged in delivering a wide series of Digital Voltmeter. Offered appliance is highly asked for in the market owing to its durability and high quality. The offered items are highly regarded among our customers due to its long functional life and fine quality. This item is verified on different parameters by our workers to ensure it is defect free.   Features : Easy installation Sturdiness Durability Our range of Digital Volt Meter come with simple display-only types in open type and enclosed versions. Precision A to D converters ensure accurate readings and low cost. Anyone and everyone can use these meters.   Specifications : Measuring Range - 0-999 Size - 96*65 mm

• Type: Kelvin Bridges
• Material: Plastic
• Application: Industrial, Laboratory
• Weight: 4-6 Kg
• Color: Black, White
• Feature: Durable, High Quality, Long Life, Smooth Finish, Good Quality, Easy To Use
• Voltage: 220 V
• Packaging Type: BoxCarton
• Phase: Three Phase
• Driven: Electrical

Harpenden Skinfold Caliper to assess degree of fatness , Girth measurement of small joints. It is being used in numerous clinical studies over the past 25 years , Recent enhancements to the caliper include an increased jaw opening to facilitate measurement up to 80mm, which makes them suitable for both measurement of skin folds and the girth measurement of small joints .

We are the Manufacturers & exporters of a wide variety of "Calipers". Some of the standard calipers are:  Art 106     OUTSIDE CALIPER SPRING      Art 107     INSIDE CALIPER SPRING    Art 108     DIVIDER SPRING    Art 109     FIRM JOINT CALIPERS DIVIDERS    Art 110     FIRM JOINT CALIPERS INSIDE    Art 111     FIRM JOINT CALIPERS OUTSIDE    Art 112     VERNIER CALIPER BRASS

Description Electronic inside caliper gauges are suited to measuring bores, internal grooves and other hard to reach internal dimensions Features • Digital and analogue display on LCD • Function include Power, Absolute & Incremental • MetricImperial conversion • Remembers the data of Max. and Min or hold data • Direct RS232 Output (Uses cable 40-401) • Uses CR2032 Battery. Auto power off • Accuracy 0.03mm • Tolerance set

 Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns B.S. sieve. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. The scale range is 0.995 to 1.030 density (gms./cc) at 270C smallest division on the scale is 0.0005.

• Brand Name: Techo scient
• Usage: Industrial
• Model Name: TSHD

Product Description :                                                                                               UP Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error. Special Features: Available in 30, 60, 75 & 120 kV models Easy to operate Digital meters for easy readability. High Voltage Surge protection  Multiplier circuit for better life.   Technical Details:   Input : 220/230 Volts Single Phase 50Hz. Ac supply.   Output : 25-70  KVKVA : 150-1500W Cooling : Naturally Air Cooled. Output Voltage  Control : Stepless Rating : Continuous for testing duty. HT CABLE : The equipment is supplied with five meters long cooper braided H.T. cable with HT plug and socket. The braiding remains on earth potential. LT CABLE : For input supply ten meters long 3 core cable is provided. ZERO START INTERLOCKING : This is to ensure that the H.T. shall not actuate if the voltage control knob is not at zero position. EARTH INTERLOCKING : If proper earth is not connected the HT shall not actuate. AUTO DISCHARGING ARRANGEMENT : The equipment consists of automatic cable discharging arrangement. SOCKET : H.T. plug and socket has been especially developed by us with automatic earthing arrangement METERS : mA meter and Volt meter are provided on H.T. side. The meters are well protected against surges and spikes. OVER VOLTAGE PROTECTION : H.T. Automatically trips in case of output voltage exceeds the preset level. SURGES AND SPIKES PROTECTION : During the testing surges or spikes are often generated due to short circuit. The equipment is fully protected against these.

• Features: Micro-controller based automation for ease of operation

item code: ff002flame photometer 128 is a micro-controller based instrument designed to provide automation in operation, measurements and end-result presentation. It does the estimation of sodium (na), potassium (k), lithium (li), and calcium (ca) in single aspiration of a sample. For user's convenience, the instrument offers two measuring modes : low concentration. high concentration. there is facility of curve fining correction for non-linear emission characteristics of element, at higher concentration, store (save) setup for frequently used, measurement and the same can be recalled whenever required with a press of a button. Al so re-standardization using single standard to minimize the effect of any unforeseen drift without going for the full recalibration. 4 line 20-character lcd readout provides easy user interface & presentation of results. A centronics printer port provides print out of results on epson compatible dot matrix printer, printer is an optional.features: micro-controller based automation for ease of operation determination up to four elements with single aspiration (na, k, li and ca) curve fitting correction for non-linear emission characteristics of element at higher concentration, maximum five-point calibration storing facility for setups and results (date wise & batch wise, maximum 700 results), the same can be recalled whenever need arise 4 line 20-character lcd readout facility for re-standardization with single standard multi standard graph in dot matrix printout built-in real time clock fordate and time of analysis centronics printer port provided for print out of results (simultaneous with analysis or recalled) on epson compatible dot matrix printer printout facility tor invaluable sample, oaten sample, total clays samples or entire results in the memory (700 max.) air compressor with built-in air regulator and air filter (systronics -126) pc link software for transferring data to computer & manipulation of data in computer using rs-232.

Jumps manufactures Electronic Regulators for all popular Indian vehicles the components for these Regulators are imported from Taiwan.The company also manufactures Rectifiers for several well-known Indian vehicles using press-fit diodes sourced from reputed suppliers.Moreover, Jumps also produces Mechanical Regulators for European applications.

We are offering voltage regulators. Jumps manufactures electronic regulators for all popular indian vehicles the components for these regulators are imported from taiwan.the company also manufactures rectifiers for several well-known indian vehicles using press-fit diodes sourced from reputed suppliers.moreover, jumps also produces mechanical regulators for european applications.

• Type: Bomb Calorimeter
• Certification: ISO 9001:2008
• Application: Industrial Use
• Color: Grey, Maroon, White
• Voltage: 220V
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Body Material: Cast Iron, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs
• Automation Grade: Automatic, Fully Automatic

Product Code: EKE 529Standrad: ASTMD 88, D 244, AASHTO T 72 EKE 52901 Brass oil tubeEKE 52902 Receiving Flask, 60 mlEKE 52903 Universal and flurol tip (set of 2)EKE 52904 Filter FunnelEKE 52905 Thermometer SupportEKE 52906 Heating coilEKE 52910 ASTM Thermometer Type 17F, Range: 66º F to 80ºFEKE 52911 ASTM Thermometer Type 18F, Range: 94º F to 108º FEKE 52912 ASTM Thermometer Type 19F, Range: 120º F to 134º FEKE 52913 ASTM Thermometer Type 20F, Range: 134º F to 148º FEKE 52914 ASTM Thermometer Type 21F, Range: 174º F to 188º FEKE 52915 ASTM Thermometer Type 22F, Range: 204º F to 218º FEKE 52916 ASTM Thermometer Type 77F, Range: 245º F to 265º FEKE 52917 ASTM Thermometer Type 78F, Range: 295º F to 315º FEKE 52918 ASTM Thermometer Type 79F, Range: 345º F to 365º FEKE 52919 ASTM Thermometer Type 80F, Range: 395º F to 415º FEKE 52920 ASTM Thermometer Type 81F, Range: 445º F to 465º F   For the empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures between 70º F and 210º F. This is also used for determining the Saybolt Furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450ºF. It comprises one each of Cylindrical Oil Cup, Universal Tip, Furol Tip, Bath fitted with immersion heater mounted on a stand, Dimmerstat for temperature control, Stirrer with shield. Complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level. Suitable for operation on, 220 V, 50 Hz, Single Phase, AC Supply.  

The DIELECTRIC HIGH VOLTAGE TEST  is an integral part of the product safety evaluation of electrical and electronic devices, and provides manufacturers with important information regarding the quality and appropriateness of the chosen insulation system. This test is a property of interest for many fields where electric field is present.This test involves placing an high voltage across the insulation barrier of the device as per Indian and International Standards. If the insulation holds the voltage, the device is deemed to have passed the test. However, if the applied voltage allows current to flow through the insulated device after its breakdown , then insulation is determined to be insufficient since it might pose a shock hazard to users. Since Its related to the shock hazard to the end users that’s why it is a very important test.   • With safety high voltage probs. • Rating as per requirements. • With audio visual alarm system. • With necessary voltmeter and tripping current meter. • Rugged and Highly durable equipment

Features:- Used as holding device for dial indicator. heavy & rigid construction. Column can move to & fro to full base length. Fine adjustment for accurate setting. Both faces of base can be used.

fan jaali, Milk Storage Tanks, road milk tankers, dairy equipment machinery

hydraulic dynamo meter, hydraulic compression testing equipment

• Open Circuit Voltage: 0 to 5 KV OR 0 to 10 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Digital Panel meter.
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz

High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to connect the output high voltage to the device under test.

• Type: Bomb Calorimeter
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 110V, 220V
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs
• Automation Grade: Automatic, Semi Automatic

• Accuracy: Within ± 5%
• Power Supply: 230V ±10% at 50Hz

Million Megohm Meter OR IR Tester (Insulation Resistance Tester) is an ideal instrument for measuring high resistance and insulation. Since it applies a highly stable IC regulated H.T up to 500VDC across the element under test, it serves the purpose of a megger also. It measures the insulation resistance of the sample under stress by subjecting it to the voltage. It has a measuring range of 1 Megohm to 100 Million Megohms in seven decade ranges and is capable of reading up to 100 Million Megohms (1016 Ohms) with accuracy operational amplifiers ensures low drift, low input bias current, highly stable performance. A separate HT-NORM-RX switch with amber colour lamp indication facilitates to link or de-link HT with terminal. The HT can also be across checked and set accurately in HT position by observing PSD and using fine and coarse H.T controls.