Sumitron Exports Private Limited Rohini, Delhi

The Treston Adjustable Workbenches TPH SAP is a modular workbench used in assembly and production lines. The workbench is available in both regular and ESD variants. The height of the workbench can be adjusted manually using an allen key. The height can be adjusted between 650 and 900mm. The workbench is available with a pair of upright profile and a shelf. The height of the shelf can be adjusted between 1080 and 1550mm. The load capacity of the shelf is 50kg. The steel frames of the workbench are powder coated with epoxy in light gray RAL 7045. The workbench top is of 26mm thickness and is ESD laminated.

It is used to strip electrical insulation from wires. It removes insulation very cleanly even for components such as PTFE. It easily cuts insulation of single wires. It has a standard HAKKO FT 8002 handpiece. It has three replaceable blades. Interchangeable blades allow working with wires of different diameters. The maximum wire diameter supported is 12mm. It has a power save mode which cuts power to the blades by 50% when the handpiece is placed in the holder.

Availability : 1.2kg

The HAKKO FT 801 is a compact thermal wire stripper,It is used to strip electrical insulation from wires,It removes insulation very cleanly even for components such as PTFE. It easily cuts insulation of single wires.

State of the art machines that are equipped with newly designed nozzles to meet lead-free solder flowablity of high melting point and low specific gravity. Various control parameters to deliver the best in production.

There are two Advanced Video Inspection System from our Principals SharpVue, USA that are used world-wide for a host of their user-friendly features. Built in 3-megapixel high resolution camera & 3-quadrant LED lighting system. The touch screen feature provides ease in annotation and measurement of job under supervision. The ViTiny UM08 is an autofocus digital microscope. It is used for inspection on production lines. It provides a magnification of 12x – 132x on a monitor of 21.5inches for every 4x lens. It gives an HDMI output of 1080P. The IR remote control can be used to change the focus from manual to auto and vice-versa. It has 30 pieces of built-in LED lights which allow adjustment of brightness. It has a 2 mega pixel CMOS sensor. It has an in-built light socket. It has a shutter which can be opened and closed depending on the lighting. It has a defog function which is used to manage the contrast of images in real time. It has functions such as wide dynamic range (wdr), noise reduction, detection of moving objects, and so on. It has a rotary mirror to rotate images. It can zoom in and out to resize images. It also enables reversing of images. It also has an image stabilization system.

The microscope features the latest optical technology to provide clear and sharp images with a zoom ratio of 7.50:1 over the entire field of view at all magnification levels. To further enhance workability its newly developed DHW10x eyepiece with tilting head feature and rubber eye guards increase the operator comfort and performance.The third vertical tube with diopter provides following additional functionality to the microscope :- for connecting camera (using C-mount adapter) to record images and for a simultaneously second viewer access to an under observation specimen

The Kanon Torque Wrenches are used to tighten fasteners using specified torque values. The Dial Indicator Torque Wrenches (TOK) has a dial to read torque values. They are used for general tightening, and in regular maintenance and inspection operation. The Adjustable Ratchet Torque Wrenches (QLK) enable fastening with any torque value in the specified range. It allows easy replacement of sockets which allows working with fasteners of different sizes. The other side can be used to loosen the fasteners. The Adjustable Wrench Head (HYK) has a reversible head which enables it to be used in difficult to reach places. The Pre-Set Ratchet Torque Wrenches (QSPK) fastens using the pre-set torque value using square drive ratchets. It is suitable for repetitive jobs. The Pre-Set Torque Wrenches (SPK) gives an audio indication, the “Click” sound when pre-set torque value is reached. The Marking Torque Wrenches marks the fastener after “Click” sound. The Pre-Set Ring Torque Wrenches (RSPK) has a 45-degree offset in its head allowing it to be used in difficult to reach places.

The Kilews Torque Meters are used to measure torque in a shaft. It measures the amount of twist in the calibrated length of the shaft. It enables setting the torque ranges. A LED indicator glows if the measured torque is not in the specified range. It can be connected to a computer using the USB 1.0 connector. The data of the measured torques can be transferred to the computer using USB connection. It can be automatically reset to zero value after every reading. It measures the maximum, minimum, and mean torque values automatically.

This unit consists of a combination ball bearing base baseplate and dividing trays and top plate and will hold 12 small parts storage cabinets 551554 ESD in three layers. Each layer contains four cabinets which are ordered separately. The Spacemiser consists of two smaller storage cabinets of heights 290mm and 550mm. It can be mounted on wall, worktop, or on a turntable to enable smooth rotation. It is ESD safe. It is available with an earthing cable.The Spacemiser is available in two variants: Spacemiser 12-550 ESD and Bench top Spacemiser PTP-5 ESD.

It is used to strip electrical insulation from wires. It removes insulation very cleanly even for components such as PTFE. It easily cuts insulation of single wires. It has a standard HAKKO FT 8002 handpiece. It has three replaceable blades. Interchangeable blades allow working with wires of different diameters. The maximum wire diameter supported is 12mm. It has a power save mode which cuts power to the blades by 50% when the handpiece is placed in the holder. It enables various temperature settings depending on the material of the wire insulation.

The KST Crimping Tools are used in various applications. They can be used with various terminals. They can be used with insulated and non-insulated terminals. They work with double crimp ring, spade, and pin terminals. They can be used with single crimp tool with insulated male and female connectors. Insulated crimp flag terminals, Amp-type flag terminals and Cord end terminals can also be used with crimping tool. The crimping tool can be used with RG585962, BNCTNC COAX and RJ45 connectors. It also works with aluminum and copper lugs.

This small and elegantly engineered semi-automatic tape dispenser is ideal for low to mid production applications. The dispenser utilizes thin film and OPP tapes which can be configured for three cutting lengths i.e. 30mm, 45mm, and 90mm.The dispenser is powered by three D batteries and hence can be used during power cut. Has two step simple operation i.e. tape is cut by raising and pulling across a serrated blade, which activates a switch to advance the next piece of tape.

World renowned brands of equipment from reputed Japanese & German companies we maintain healthy inventory of spare-pan to save on the down-time of these machines. The Tsutsumi iCross TX- i1224 is a soldering robot used for point and slide soldering. The X, Y, Z and R axis have 200X200X100mm and 360 degree range of operation. The base of the robot is made of aluminum to give it good rigidity. It has stepper motor and a ball screw which help in achieving accurate repetitions and improving the carrying capacity. It has a simultaneous 4-axis PTP control. It also has simultaneous 3-axis PTP and CP functions. It has IMPACIII controller which is used to check and adjust feeding amount, feed rate, and temperature of soldering wire.

Availability : 20kg

Power Consumption : 19 w (220 v), 50 Hz

Availability : 930 g

Select able heating programs for different solder alloys. Precise digital temperature control. Special coating for long life.

We are the leading manufacturers, exporters and supplier of this products.

Temperature Range : 200-500 deg C

For these solder formulations, we represent and support the world’s best brand Kester from USA. Mostly available from stock, these formulations help your product to compete in the World market with ease.

For these solder formulations, we represent and support the world’s best brand Kester from USA. Mostly available from stock, these formulations help your product to compete in the World market with ease.

It has an adjustable holder for the soldering iron. Adjust the holder to your working style. The holderensures accident free operation while working with hot parts of the soldering iron. Power saving with automatic sleep and shut off options when soldering iron is placed in the holder.It has a lock-type sleeve assembly for soldering irons which enables quick change of the composite tips.It has a control key card which enables locking at a temperature setting.It has an alarm which warns when the solder joints reach low temperatures.

An automatic SMD chip counter that helps in stock management for increased efficiency. It is equipped with an internal power supply for back up during power failures. Fully automatic component counter is ideal for counting chips with great precision and accuracy and simple to operate.It has a count capacity of -99999 to 99999. The presence of internal power backup helps in sustaining system during blackout.

Compact equipment having smaller foot print and powerful absorption using high flow rate that keeps your work environment pollution free.

The Nitto Seiko FM503H series is an automatic screw feeder used to fasten screws. It uses pneumatic pressure to feed the screws from a hopper storage to the air feed system. It has a filter plate that ensures screws of correct shape are fed. The screws from the air feed system are held on the driver tip by a chuck. Maximum of 30 screws can be continuously fed for manual fastening. It can be used to fasten rivets, studs, bolts, and hammering nails or threaded rivets.

Country of Origin : 220 V