Three S instruments Pvt. Ltd. Patel Nagar, Delhi

Designed for the pro, save and export thermal and digital images with easy report writing software. Model Number a50 Every Pixel is individually calibrated! Double Vision feature takes a Thermal and Digital picture at the same time, and can include up to a 45 second voice recording. Hands-free flashlight (optional) screws into camera to brighten dark areas for clear digital pictures. Operates on it's own internal battery, enabling longer camera battery life. designed for the professional required to document and prepare reports with ease, including thermal and digital images. "a" speed at 9 Hertz captures clear, sharp images!)

Designed for on the spot routine maintenance inspections. Model Number a30 designed for maintenance inspections not requiring a report. The a30 can also be transformed into an Inspector at any time! Every Pixel is individually calibrated!Double Vision feature takes a Thermal and Digital picture at the same time, and can include up to a 45 second voice recording. Hands-free flashlight (optional) screws into camera to brighten dark areas for clear digital pictures. Operates on it's own internal battery, enabling longer camera battery life High Temperature Upgrade - 212o to 1112oF (100o to 600oC) Wide Angle Lens Upgrade - .5 Magnification allows for a 35o x 26o FOV Telephoto Lens Upgrade - 2 X Magnification allows for a 8.75o x 6.5o FOV "a" speed at 9 Hertz

Wahl Heat Spy Infra Red Thermometers DHS1900 High Accuracy Infrared Thermometers   The NEW! Wahl DHS1900 High Temperature hand held infrared thermometer used for the Aluminum Industry. This models has an RS485 interface and 4-20mA analog signal output through two mini-USB ports below the LCD. Extra High Temperature 662o to 3452oF (350o to 1900oC) Used for Aluminum Processing Distance to Spot 150:1 Includes Hi, Low Alarms MAX/MIN/AVG/?T calculations Adjustable Emissivity for better accuracy

TVOC Fixed PID Detector for Continuous VOC Detection   TVOC is a fixed photoionisation detector (PID) designed for continuous measurement of total volatile organic compounds (VOCs). New ATEX approvals enable a 3 wire TVOC system to be used in Zone 2 hazardous areas, without safety barriers. ATEX and IECEx approvals allow TVOC to be used in Zone 1 hazardous areas, with safety barriers. Independently verified as best performing PID technology Patented Fence Electrode Technology for fast, accurate humidity resistant operation ATEX: Zone 2 hazardous areas without safety barriers (3 wire option) ATEX & IECEx: Zone 1 hazardous areas with safety barriers (4 wire option) 3 wire option allows direct replacement of an existing PID area monitor (Zone 2 ATEX) Selectable detection range of 0 - 10 ppm, 0 - 100 ppm or 0 - 1000 ppm Diffusive monitoring - no pump required Scaled 4-20 mA analogue output Includes a 10.6 eV lamp Easy access PID sensor allows simple servicing Simple calibration procedure

The universal measuring amplifier/controller for pH, redox and chlorine measuring applications   pH, redox and chlorine/ozone measurements are required daily in many industrial water applications. It is therefore especially important that the measuring instruments used are reliable, simple and uncomplicated to use. The clear layout of the front panel and the simply labelled operating buttons of the VARIOCON 2010 help the user to find his way around the operator control levels without any difficulty.The modern configuration of the instrument enables individual settings to be made for many measuring and control tasks in industrial and municipal applications such as swimming pools, neutralizing plants, refrigeration plants, sewage plants, water treatment, chemical plants, ... - wherever the pH value or redox reading gives an indication of contamination or neutralization. The same applies to chlorine and ozone measurements (especially in swimming pools). Compact, robust measuring amplifier for pH, redox, chlorine Easy operation designed for practical use Good price/performance ratio

Type K Thermocouple Meter 70 to 1370oC   Model Number 3200M   The pocket-sized microprocessor-based Heat-Prober Type K thermometer updates readings three times per second with an accuracy of +-0.2% of reading +-1 digit in 1oF or oC resolution. The precision cold junction is compensated with a unique, permanently calibrated circuit. Advanced electronics are housed in ABS plastic, thoroughly tested for environmental integrity and subjected to 4-foot drop tests, battery life and running life tests. All units are calibrated with simulated EMF inputs and powered during a high-temperature burn-in cycle. The result is a thermometer so durable and reliable that it comes with a 3-year warranty. Meter range is 70 to 1370oC. Features a bright .33" high red LED display for normal to low lighting conditions. The 3200M operates on a rechargeable 6.25V NiCad battery pack. Includes battery recharger/AC line adapter.

CS 21 Transmitter   Low Cost Solid State Sensor   The CS 21 transmitter uses the proven chemosorption detection principle for detection of toxic gases, vapors and combustibles. The rapid response of the transmitter provides opportunity to take counter measures and thereby limit damages. The long life of the sensors makes the CS 21 a low-cost solution for your detection needs. A transmitter can be continuously operated for more than 5 years High sensitivity to a broad range of refrigerants Long sensor life Fast response

Toxics Gases Transmitter EC28   The smart transmitter   Whereven hazards are to be expected, the transmitter EC28 and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEXcertified design, an integrated, Ex-proof buzzer and bright alarm LEDs provide highest safety including visual and audible alarm even in hazardous areas. Thus the gas alarm does not only alert the man in the control room but also the person at site. Reading of gas concentration at transmitter display Ex-proof visual and audible alarm ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4 One-man calibration at transmitter by means of touch keys or remote control Plug-in Smart Sensor - Sensor replacement without opening of casing

SAM Smart Area Monitor EC 36 - Stand alone   The EC 36 is a stand-alone transmitter. In every EC 36 there is a sensor, control electronic and relays for triggering of alarms. LEDs in the front panel immediately indicate the alarm. The signal output is provided as a 4..20 mA signal.The EC 36 is the most enhanced single point gas detector available offering features never known to the industry. Equipped with AutoCal, the EC 36 can be comfortably calibrated in a matter of seconds. A 17 mm high backlight LCD-display indicates the gas concentration, status report and, if operated in service mode, all settings. In applications where the display of the EC 36 cannot be read because of its mounting position, a remote display is easily connected to an interface. Using the remote control, nonintrusive remote calibration can be performed, making forklifts or ladders a thing of the past. Integrated alarm control 3 alarm relays AutoCal for easy and fast calibration Illuminated 4-digit LCD display for easy reading Extremely rugged casing Remote control and remote display  even for Exendangered areas Smart Sensor Technology

Monitoring SulfurHexa Fluoride(SF6) In the Power Utility Industry   LumaSense's SF6 Leak Detector offers an unmatched combination of performance and convenience. Based on Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas detection. The growing environmental requirements regarding the use of SF6 make LumaSense's system a coveted tool designed for every day use. SF6-Filled Equipment Testing In order to meet final test standards, as well as to up hold any new regulations that may been forced to enable the continued use of SF6, a manufacturer of SF6 - filled equipment must perform quality assurance testing. The SF6 Leak Detector system's accuracy and low detection limits enable manufacturers to complete these tests more efficiently and with greater precision. Ultra sensitive - 5 ppb detection limit Easy to use No consumables No radioactive source Wide measurement range High stability Portable Rugged Response in less than 15 seconds Includes water-vapor measurement and compensation Auto compensates for temperature and pressure fluctuations

Refrigerants CS 21 Transmitter   Low Cost Solid State Sensor   The CS 21 transmitter uses the proven chemosorption detection principle for detection of toxic gases, vapors and combustibles. The rapid response of the transmitter provides opportunity to take counter measures and thereby limit damages. The long life of the sensors makes the CS 21 a low-cost solution for your detection needs. A transmitter can be continuously operated for more than 5 years High sensitivity to a broad range of refrigerants Long sensor life Fast response

Portable Single or Multigas Atmospheric Detector GfG G460 Single or Multigas Detector   The World's Most Advanced Multi-sensor Atmospheric Detector   The durable G460 continuously measures and displays readings for up to six gases at the same time.The G460 is compact, robust and very easyto- use. The dust proof and highly water resistant (IP-67) housing is designed to survive the toughest environmental conditions. The housing even includes a built-in rubberized boot to withstand the hard knocks of confined space entry. Exceptional HAZMAT and Confined Space performance Up to 6 channels of detection. PID sensor for direct reading of toxic VOCs Infrared (IR) sensors for CO2 and combustible gas (0 % LEL - 100% volume) Full 3-year warranty on O2, Combustible, CO, H2S and CO2 sensors Wide range of additional sensors including SO2, HCN, Cl2, NH3, PH3, H2, NO, NO2, ClO2, O3, ETO and more! Highly configurable smart sensor design Full featured, rugged design Optional motorized pump operable in diffusion or sample draw mode Affordable price!

Display Type : Digital

Gas Type : Natural Gas

Power Source : Battery

Condition : New

TC621 Pocket Thermocouple Calibrator   Pocket Thermocouple Calibrator   User friendly and robust the WahlR TC Series Pocket Calibrators have been designed to simplify temperature transmitters and probes maintenance and commissioning. They measure and simulate thermocouples or RTD's. High accuracy: 0.02% of reading. Very low temperature coefficient: as low as 15 ppm/oC in thermocouples. Accuracy is maintained even in harsh enviromental conditions. Measurement and Simulation of 14 thermocouples.

TC622 Pocket RTD Calibrator Pocket RTD Calibrator   User friendly and robust the Wahl� TC Series Pocket Calibrators have been designed to simplify temperature transmitters and probes maintenance and commissioning. They measure and simulate thermocouples or RTD's. High accuracy: 0.02% of reading. Very low temperature coefficient: as low as 10 ppm/oC in thermocouples. Accuracy is maintained even in harsh enviromental conditions. Measurement and Simulation of 12 RTD types.

Innova 1314 Photoacoustic Multi Gas Detector The Photoacoustic Multi-gas Detector - INNOVA 1314 is a highly accurate, reliable and stable quantitative gas monitoring system. It uses a measurement system based on the photoacoustic infra-red detection method, and is capable of measuring almost any gas that absorbs infrared light.Gas selectivity is achieved through the use of optical filters. By installing up to five of these filters in the 1314, it can measure the concentration of up to five component gases and water vapor in any air sample. Although the detection limit is gasdependent, it is typically in the ppb region. The accuracy of these measurements is ensured by the 1314's ability to compensate for temperature and pressure fluctuations, water vapor interference and interference from other gases known to be present. Reliability of measurement results can be ensured by regular self tests, which the 1314 performs. By the nature of this measurement system, it requires no consumables and very little regular maintenance, for example Selectively measures a wide range of gases/vapors Linear response over a wide dynamic range High stability (low drift) makes calibration only necessary one - two times a year Extremely reliable due to self-testing procedures User-friendly procedures for calibrating the monitor, presenting and analysing measurement data via the PC user-interface Accurate - compensates for temperature and pressure fluctuations, water vapor interference and interference from other known gases Extremely low-volume flushing possible Operates immediately - almost no warm-up time necessary Fits in a standard 19 inch rack and collects samples from points up to 50 meters away Presents measurement data both in tabular and graphic formats - up to five gas concentration and water vapor graphs displayed, simultaneously

Innova 1412 Photoacoustic Field Gas Detector   The Photoacoustic Field Gas-Monitor - INNOVA 1412 is a highly accurate, reliable and stable quantitative gas monitoring system. It uses a measurement system based on the photoacoustic infrared detection method, and is capable of measuring almost any gas that absorbs infrared light.Gas selectivity is achieved through the use of optical filters. By installing up to five of these filters in the 1412, it can measure the concentration of up to five component gases and water vapor in any air sample. Although the detection limit is gas-dependent, it is typically in the ppb region. The accuracy of these measurements is ensured by the 1412's ability to compensate for temperature and pressure fluctuations, water vapor interference and interference from other gases known to be present. Reliability of measurement results is ensured by regular self tests, which the 1412 performs. By the nature of this measurement system, it requires no consumables and very little regular maintenance, for example, for most applications recalibration is only necessary one - two times a year. Selectively measures a wide range of gases/vapors Linear response over a wide dynamic range High stability (low drift) makes calibration only necessary one - two times a year Extremely reliable due to self-testing procedures User-friendly procedures for calibrating the monitor, presenting and analyzing measurement data via the PC user interface Accurate - compensates for temperature and pressure fluctuations, water vapor interference and interference from other known gases Extremely low-volume flushing possible Operates immediately - almost no warm-up time necessary Presents measurement data via connected PC both in tabular and graphic formats - up to five gas concentration and water vapor graphs displayed, simultaneously

Oxygen Transmitter EC28   The smart transmitter   Whereven hazards are to be expected, the transmitter EC28 and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEXcertified design, an integrated, Ex-proof buzzer and bright alarm LEDs provide highest safety including visual and audible alarm even in hazardous areas. Thus the gas alarm does not only alert the man in the control room but also the person at site. Reading of gas concentration at transmitter display Ex-proof visual and audible alarm ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4 One-man calibration at transmitter by means of touch keys or remote control Plug-in Smart Sensor - Sensor replacement without opening of casing

Long Distance Portable Infrared Thermometer   Wahl is pleased to introduce our NEW! Long Distance models to our line of Heat SpyR Infrared Thermometers. Widely used for non-contact temperature measurement and preventive maintenance in the Electrical Power Generation and Power Transmission industries, these new Heat SpyR Infrareds are preferred by maintenance engineers to easily search out hot spots at a safe and convenient distance. 300 to 1 - Distance to Spot Size Ratio Measures accurately from 30 to 50 feet

GfG G460 Multi Gas Detector with VOC & IR Sensors   The World's Most Advanced Multi-sensor Atmospheric Detector   The durable G460 continuously measures and displays readings for up to six gases at the same time.The G460 is compact, robust and very easyto- use. The dust proof and highly water resistant (IP-67) housing is designed to survive the toughest environmental conditions. The housing even includes a built-in rubberized boot to withstand the hard knocks of confined space entry. Exceptional HAZMAT and Confined Space performance Up to 6 channels of detection. PID sensor for direct reading of toxic VOCs Infrared (IR) sensors for CO2 and combustible gas (0 % LEL - 100% volume) Full 3-year warranty on O2, Combustible, CO, H2S and CO2 sensors Wide range of additional sensors including SO2, HCN, Cl2, NH3, PH3, H2, NO, NO2, ClO2, O3, ETO and more! Highly configurable smart sensor design Full featured, rugged design Optional motorized pump operable in diffusion or sample draw mode Affordable price!

Accurate gas leak measurement, Rapid readings of even the smallest leaks   GasCheck leak detector is capable of detecting almost any known gas or gas mixture. The micro thermal conductivity sensor responds rapidly to a leak helping you to detect even the smallest quantities of escaped gas.GasCheck is conveniently calibrated against helium - the most commonly used tracer gas - and is particularly sensitive to ammonia, argon, butane, hydrogen, SF6 and refrigerants. The instrument range offers intrinsically safe versions for use in areas classified as zone zero flammable and can also safely detect flammable gases. GasCheck 3000 : The simple, easy to use leak detector Designed specifically for search and location of non-flammable gases, such as helium and CFC's. GasCheck 3000is : An intrinsically safe leak detector 3000is is an ATEX approved intrinsically safe version of the 3000 instrument designed specifically for use in flammable areas and for the search and location of flammable gas leaks. GasCheck 5000is : An advanced leak detector with download capability for easy data analysis 5000is benefits from many advanced features including data logging with a date and time stamp, a choice of readout units ppm or ml/sec, and an adjustable alarm level. 5000is can also download its data logged results to a PC for analysis via an infrared link. The accompanying software allows for the creation of graphs from the downloaded data and printed reports.

ION Science GasCheck, R2pc Designed specifically for the detection and measurement of CFC's, HFC's and HCFC's.   GasCheck R2pc is a light weight, handheld leak detector specifically designed for the detection and measurement of refrigerant and air-conditioning gases. At the heart of the instrument is a unique sensing system optimised for refrigerant gas leak detection. The inboard pump and flow management system enables the instrument's high sensitivity and rapid response to detect the smallest of CFC's and HCFC's leaks - 0.2 gm/yr. Robust and reliable, the instrument can be switched to display leak rates in gm/yr or ppm. Leak rate measurements are continuously updated allowing the leak to be accurately located and the leak rate exponential measured.

Wahl's Brand New Hand-Held Infrared Thermometers!   America's most innovative thermometer company. Palmer Wahl, manufactures precision temperature instruments. Wahl was the first to bring the industry a portable, non-contact, handheld infrared thermometer at an affordable price point. Today, Wahl is pleased to introduce this new model to our famous line of Heat Spy Infrared Thermometers. These incredible accurate and robust Heat Spy's will help you diagnose any problem, and prevent costly equipment downtime. The variety of features enable you to select the most appropriate Heat SpyR for your application. The most economical and highest performing Heat Spy in its class Used for close range: 8:1 Lower temperatures: 619oF (326oC)

Indoor Air Quality AQ Expert   Providing the latest in Detection & Data Logging for IAQ testing in Buildings, Hospitals, Schools, Labs, Clean Rooms, Airports, & more   Custom to Your Application : Up to 11 different parameters and gases to meet the needs of most air quality analysis REAL-TIME Data Logging : Save and graph using USB or wireless Bluetooth to a PC Easy Calibration : Built-in menu driven calibration procedure Made in USA : Designed and manufactured in the USA