Tiles Machinery Dealers in Delhi

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable.  the machine works on 440 volts A. C. , three phase electrical supply

Our Hydraulic Tile Press Machine has automatic control system contributing to easier operation and maximum output. Our Hydraulic Tile Press Machine is fast performing and has load capacity of 30 to 80 Ton Production. Our Hydraulic Tile Press Machine produces 3000 Pc in 8 Hour. Details Press Structure : 1 Nos (Heavy Duty)Power Pack : 1 NosElectric Motor : 5 HP (Crompton)/Siemens MakeWeight : 750 Kg Approx.Load Capacity : 30 to 80 TonProduction Capacity : 3000 Pc in 8 Hour

Staffed with dexterous team members, they make complete quality analysis of the product before send off. Owing to our well-established set-up in Delhi(India), we are capable of catering to the requirements of clients with utter ease. Our tile flexure texting machine is suitable for ceramic tile, brick, cement materials, gypsum etc.

Unit for finding flexural strength of clay roofing tiles and cement concrete flooring tiles. Flexural load is applies on the tiles using lead shots. The machine consists of a stand on which two 40mm dia bearing rollers or 12mm dia rollers are placed at centre distance of 150mm, 200mm, 250mm, or 270mm as the case may be. The third upper roller applies centrally flexural load by means of lever arrangement. Lead shot contained in an upper vessel start flowing into lower container at a rate of 45 to 55 kg. Per minute or 200 kg. Per minute there by, starting loading the specimen. Arrangement is made such that loading automatically stops when specimen breaks. Supplied without lead shots. Accessories : lead shots supplied in packs of 20 kgs.

We are offering tile abrasion testing machine. Tile abrasion testing machine: this is used for determination of resistance to wear for cement & concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tiles is subjected to wear for similar number of rotations. The wear of the tile is measurred on a thickness gauge specifically made for the purpose. The machine consists of a disc roatating at a speed of 30 r.p.m. In a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Land applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re- adjustable. The machine works on 440 va.c. Three phase electrical supply. On request machine to operate on 230 va.c. Supply can also be supplied.

For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1 :12) loading machine and the load is applied by flow of lead shots which automatically stops when the sample breaks. The load is applied at the rate of 450 to 550 Nminute or 200 kgminute as per relevant standards test requirement. The accuracy of load indication is within± 2%. The sample is mounted between rollers 40mm dia or 12 mm dia as per relevant standards test requirement. Capacity 200 kg.

Leveraging on our industry expertise and industrious professionals, we are able to design and provide quality range of Vibrators (Model No. R-04). These vibrators require low power for operation and have high production capacity of 2000 moulds per shift.Specifications: Virtual size: 10' x 2.5' Plate size: 10" x 8" Heavy channel Power required: 2 H.P. special rubber moulds Production capacity: 2000 Moulds per shift

his is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at rate of 450 to 550 Nminute (45 to 55 kg minute) or 2000 Nminute (200 Kgminute) and the accuracy of load indication is �± 2%. The sample is mounted between rollers 40 mm dia or12 mm dia. Bearing Rollers can be placed at center distance of 150 mm, 200 mm, 250mm or 270mm as the case may be. Complete with 20 Kg lead shots

We are the prominent manufacturer and supplier of Tile Making Machine, based in India. This machine is used for manufacturing cement tiles by using moulds, which are worked upon manually. Tile Making Machine is made from high quality raw material thus ensure high efficiency and durability. Features Timer controlled operationSingle button operationWork under dusty conditionsRobust frameLong lifeTrouble free operationMaintenance free operation Application Tile making industriesConstruction industries Specifications Capacity1200-1800 Paver per 8 hourPower (Motor)5 H.P.Lord100 tonsSystemHydraulicWall Tile Size12x12 (inch) 20 (mm)Tile Row MaterialManual FeddingRaw MaterialDust, Cement etc.Weight1000 Kg. (Approximately)Indicative only. Production, depends upon the labour efficiency and mix quality

Product Code: EKE 460Standrad: IS:654, 1237   For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots which automatically stops when the sample breaks. The load is applied at the rate of 450 to 550 N/minute (200 Kg/minute) and the accurancy of load indication ± 2%. The sample is mounted between rollers 40mm dia or 20 mm dia.

Our company is one of the leading Manufacturers, Exporters and Suppliers of the Tile Flexure Testing Machine. The Tile Flexure Testing Machines produced by our company are high-quality with numerous features and types. They are widely in demand due to their excellent performance. Tile Flexure Testing Machine is a double lever loading machine where load is placed by a flow of lead metal that automatically stops as the sample breaks. The sample is mounted between rollers which are 40mm or 12mm in diameter. Bearing rollers can be placed at center distances of 150, 200 or 270mm. The unit comes equipped with a 20 Kg lead metal Types 100 KN Flexure Testing Machine - Motorized Model100 KN Flexure Testing Machine - Hand Operated Model Applications It is used for determining the flexure strength on molded concreteFlexure test specimens of 15 cm x 15 cm x 70 cm or 10 cm x 10 x 50 cm. size can be tested for strength by third point loading method

We are involved in the provision of a “Vibrating Table for concrete paver blocks manufacturers”. http:www.srikrishnaplasto.com vibrating table is easy to install and operate, no further maintenance and care required. http:www.srikrishnaplasto.com Vibrating Table is highly durable, highly effective anti-corrosive. on vibrating table related issue Customer specifications are also supported. make We are committed to an excellent selection of Barrings with key role in maintain speed. The automotive industry uses Barrings and these Steel are available that meet the requirements according to the needs and requirements. We offer these Barrings at market prices in the foreground.

This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.