Air Meters Dealers

Simple and quick, the No. 460 Air Meter is popular for servicing air conditioning, heating and ventilating equipment. Direct reading velocity and static pressure scales - both low and high ranges - show supply and return grille velocities, furnace draft, pressure drop across filters, etc. The 460 gives consistent, accurate results with no tedious calibration. Rugged plastic for rough daily use. Dual velocity ranges read 260-1200 and 1000-4000 fpm; pressure ranges from .005-.09 and .05-1.0 inches w.c. Complete Kit includes air meter, return and supply grille probes, angle connector, cleaning materials, instruction card, air velocity calculator and carrying case.

We are offering Air Velocity Meter with 40mm Vane with Temperature Measurement. Air velocity meter with 40mm vane with temperature measurement including calibration protocol,protective cap, wrist strap, belt holder,batteries, measuring range velocity : 0.4 . 20ms,resolution: 0.1ms, accuracy: +- (0.2 ms + 2% of m.v.) . Measuring range temperature : -10 . 50°c,resolution: 0.1°c, accuracy: +- 0.5 °c, part no - 0560 4101.

TSI IAQ-Calc™ Meters are outstanding instruments for investigating and monitoring indoor air quality (IAQ). Model 7515 is a cost-effective meter for carbon dioxide (CO2) measurements. Models 7525 and 7545 simultaneously measure and data log multiple parameters. Model 7525 measures CO2, temperature, humidity, and calculates dew point, wet bulb temperature, and percentage outside air. Model 7545 adds detection of carbon monoxide (CO). 

The TMA10A is ideal for HVACR technicians measuring HeatVentila¬tionAir conditioning Refrigeration wind flow and temperature in resi¬dential, commercial and industrial air conditioning systems It offers numerous functions�use it to check air velocity FPM (Feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement loca¬tion flexibility Switch between °C and °F Input the area of airflow measurement to gain accurate air velocity results Measure an air flow source for a continuous mov¬ing average for up to two hours Determine minimum, maximum and average readings from a single point air source.

We are counted amidst the prominent Air Entrainment Meter Suppliers in India. The use of optimum quality material in the manufacturing of the Manual Air Entrainment Meter ensures high durability, tensile strength and resistance to adverse conditions.

Product Code: EKE 343   It consists of an alluminum vessel with built in hand operated pressure pump, connected to the measuring gauge showing directly the air content in percentage Air content range: 0÷10% div. 0.1% up to 8% and 0.5% over 8%Dimensions: Dia. 250x450 mm

The Air Entrainment Meter that we deal in is comprehensively used for determining air content for freshly mixes concrete via pressure method. Our Air Entrainment Meter comprises of cylindrical measure bowl cover with flanged cover assembly. The pressure gauge of our Meter is fitted at the top, which is joined with a graduated tube at one side & cylindrical bowl from the other. We also provide rubber mallet, tamping rod & spray tube & funnel with our Air Entrainment Meter.

air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when air’s entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured. general descripation & specifications the apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly.pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. standard accessories : calibration cylinder with spring clamp,trowel,tamping rod,straight edge,rubber mallet andmeasure. – 1 no. Each

Compressors are the most crucial part and the largest energy consuming component of any compressed air network. Without reliable measurement of the output of compressors, any initiative to optimise the compressed air system is likely to result in only minimal impact. Various studies show that the biggest loss of energy takes place at the point of generation. Nearly 60% of the energy consumed by a compressor is lost in the form of heat and friction losses. Improper maintenance, under-loaded operations and environmental factors add to further loss of generation efficiency. In such a scenario it becomes even more vital to monitor the output of compressors on a online basis. Forbes Marshall’s FAD (Free Air Delivery) Meter is the most accurate and most efficient way of monitoring and measuring a compressor’s output and efficiency. Based on the Vortex Flow Measurement principle, the FAD Meter has the unique feature of being the only flow metering solution with inbuilt online Pressure and Temperature compensation.

Air Entrainment Meter is used to conclude the air entrained in freshly mixed concrete by using the pressure method. Our Air Entrainment Meter conforms to IS 1199 1959 & BS 1881-106 standard. Clients highly acknowledge our Air Entrainment Meter for its reliable performance and durability. In addition, we are a trusted Manufacturer, Exporter and Supplier of Air Entrainment Meter, located in New Delhi, India. Specifications The apparatus comprises of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity, which is used to maximum the size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover with the help of a seal. The conical cover has an air valve and a petcock for bleeding off the water. A transparent cylindrical stand pipe is progressed in air is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb, which is recorded on the pressure gauge that is mounted on the stand pipe. The whole assembly is fixed on a flat base.

Air Entrainment Meters (AIM 340, AIM 341, AIM 342) Ref Std :IS 1199/1079, BS 1881, EN 12350-7   Entrainment of a small amount of air in the cement/concrete has been found to improve considerably the durability of concrete. The recommended limits specified for the air content are between 3% and 6.5%. Smaller percentages may result in deterioration taking place more quickly and larger percentages may reduce the strength without any improvement in the durability of concrete.   Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

Our range of air entertainment meters is developed as per the standards prescribed by varied well recognizedly engineering bodies. The standard capacity of these meters is 0.005 cu or 5 L. the average size of our air entertainment meters is 38 mm. These meters consist of pressure bulbs, hand pumps, tamping bars, rubber mallets and others. Our large model of air entertainment meters is available in 75 mm and these have capacity of 10 L.

Air flow meter is applicable for measuring flow rates of Bio-gas, LPG, Compressed air and other compressed gases in closed conduits. It is best suited for applications where affordability, reliability and ruggedness are of prime concerns. In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.

The flowmeter of the series EE771, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gasses. Measurement of for instance the usage of compressed air, nitrogen, oxygen, CO2 or other non-corrosive gasses.

• Saving operating cost by monitoringconsumption and detecting leakage• Convenient operating menu for allparameterization• All required signals integrated - fromanalog output to the totaliser• Ceramic fiow sensor - sensitive androbust at the same time