Manas Microsystesms Pvt. Ltd. Bhosari, Pune, Maharashtra

• Suitable For boiler feed water with density compensation. • Online Computation For density Reducing Errors in Measurement Due To Pressure &   Temperature. • Isolated 4-20mA D.C. output proportional to Flow Rate. • Linear or Square Root operation. • Availability of panel & Wall mounting. • Serial Interface with Computer through MODBUS RTU Protocol. • Two alarm settings are available and single alarm output is available. • If Flow rate exceeds the set reference flow, the lower 4 digit Display for Flow rate   blinks.      

MANAS has introduced a new economical series of Electromagnetic flow meter., considering water as the most important utility in any industry. To know your water consumption not Just by assumption but by correct instrumentation. JAL-OAGH provides the solution. It is the most suitable full bore electromagnetic flow meters for water and waste water treatment plants.  JAL-OAGH 100, 300 SERIES OF EMF These flow meters are dedicated for waste water management system, sewage & effluent water measurement. These flow meters are mainly categorized into two i.e. Threaded & Wafer type. Threaded is available from DN 25 to DN 65 i.e. Jal-oagh 100 Series while Wafer is available from DN 50 to DN 200 i.e. Jal-oagh 300 Series   Principal advantages of JAL-OAGH : • Small in size, Light in weight compared to other magnetic meters in its class• Full bore electromagnetic flow meter with absolutely no restriction to flow• Has a typical accuracy of ±0.5%.• Measurement is independent of the velocity profile across the pipe• Measurement results are independent of density, viscosity, pressure, temperature, solid impurities and conductivity variations (above 5µ S/cm for MFT-01& above 20 µS/cm for (SMART JAL-OAGH)• Fits in between the flanges of the pipe which makes it the most compact solution for flow measurement.• Compatible virtually with all corrosive and non-corrosive liquids.• It is a very cost-effective and economical flow meter as compared to other flow meters in its class.      JAL-OAGH APPLICATION : • Effluent Treatment : Untreated as well as Treated Effluent Water Measurement.• Sewage Treatment : Waste water measurement, Sludge measurement etc.• Water Supply Schemes : Raw water as well as treated water measurement.• Boiler Feed Water Measurement.• Chemical Industries : Measurement of acidic & alkaline chemicals & slurries.

• Suitable For Saturated & Superheated Steam. • Three nos. of 4-20 ma dc i/p from DP / Flow transmitter, Pressure transmitter,   Temperature transmitter/RTD PT-100. • Universal power supply. • Isolated 4 – 20 mA output proportional to Flow rate. • Accuracy of ± 0.25 % of Full Scale • 4 digits LED display for flow rate & 6 digits for total flow are available. • Linear or Square Root operation. • Serial Interface with Computer through MODBUS RTU Protocol. • The unit has two alarms, configured on pressure input.

The SFMc-150 Steam Flow Meter system is engineered to suit your requirement. It has no moving parts and no wiring connections are required during installation.The mass flow rate of Saturated and Superheated steam is calculated by measuring the differential pressure across the orifice plate and instantaneous density. Online density compensation is possible because of the online pressure and temperature measurement.In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output of from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.

The SFMc-150 Compact steam flow meter system is engineered to suit your requirement. It has no moving parts and no wiring connections are required during installation. The mass flow rate of Saturated and Superheated steam is calculated by measuring the differential pressure across the orifice plate and instantaneous density. Online density compensation is possible because of the online pressure and temperature measurement. In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output of from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.

Manas have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow meter series. The flow meter can be used to measure various types of fluid which can be found across various industrial processes. Some of the application areas include : Effluent treatment plants, Sewage treatment plant, Water supply schemes, Steel industry, Sugar industry and distillery, Pulp and paper, Chemical and pharmaceutical , Food and Drug industry.This sensor works on the Faraday’s law of electromagnetic induction. The meter is true volume measuring meter. The measurement is independent of viscosity, density, dissolved / undissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of liner & electrode materials are available as per application requirements.   The new sensors are more compact in size & more sensitive. Earth ring or earth electrode, both option are available. Empty tube detection is also provided.   PRINCIPAL ADVANTAGES : • Wide range of sizing DN 25 to DN 350 (Higher sizes are available but model is Mega-Sroat )• Manufactured in conformity with quality system ISO 9001:2000• Factory calibrated on accurate test rigs as per ISO 4185• New Feature : Empty tube detector electrode.• Option of earth electrode or earth ring is available.• End Connection:- Flange type available in various standards viz .ANSI, DIN, BS etc.• Various types of liners viz. Hard Rubber, Soft Rubber, Neoprene, PTFE , PFA.• Typical Ingress Protection, IP68 for flow sensor & IP65 for transmitter.• Time tested pulse D.C. Technique for flow Measurement.• Isolated comm. Port, digital & analog outputs.   APPLICATIONS : • Sewage Treatment : Waste water measurement, Sluge measurement etc.• Effluent Treatment : Untreated as well as treated effluent measurement• Industrial Utility Management : Measuring water consumed by each plant. Water audit.• Water Supply Schemes : Raw water as well as treated water measurement.• Sugar Industries & Distilleries : Measurement of imbibition water, raw juice etc   Measurement of Spent wash, Fermented wash molasses etc.• Automobile Industries : Flow measurement of coolant,for radiator efficiency.• Chemical Industries : Measurement of acidic, alkaline chemicals, slurries with & without dissolved solids.• Food & Beverages : Special end connection like sms union, triclover clamp, fully SS body, PTFE or PFA liner available.•  Boiler Feed Water Measurement.

Description : The Series SG-Sroat of Electromagnetic Flow meter is specifically designed for Food and Drug Industries, It is used for measurement of food liquid mediums like Milk, Cream, Fruit Juices, Pharmaceutical liquids and etc.It is available with integral or remote version of transmitter. The transmitter can have built-in or remote totalizer display. Suitable end connections of SMS Union or DIN Union or Tri-clover Clamp is given as per customer's requirements.Special models are available for mounting on Milk Tankers.   Features : • Full Stainless Steel Body.• End Connection in Union Coupling/tri-clover clamp• Sizes Available from• Highly Accurate and extremely Linear.• Isolated 4-20 mAoutput Proportional to flow rate.• Option of Pulse Output available.

Pressure : 40 Bar max.

The PI - 100 D series is a compact sized Process Indicator, designed to accept input from any two wire or four wire Transmitter. It has a seven segment, ½”, bright LED Display to read the Process Value in terms of Engineering Units or percent as is desired. The alarms can be set anywhere from 0% to 100 % with both High or both Low or one High and one Low configuration. The Output , 4-20 mA proportional to PV is isolated from input and power connections   ADVANTAGES : • Compact in Size • Field Programmable Parameters. • Linear/ Square Root operation programmable. • 4 Digit Display available to monitor Process parameter • Value from -9999 to 9999. • Isolated 4-20mAD.C. output proportional to Process Variable. Process Indicator with Alarms, PI-100 series • Adjustable Two Alarm Settings with various options of Operation. • Transmitter Supply 24 Vdc suitable for • 2 wire as well as 4 wire Transmitter.   • Serial Interface with Computer through MODBUS RTU.

The GFMc-150 flow meter is applicable for measuring flow rates of Bio-gas, LPG, Compressed air and other compressed gases in closed conduits. It is best suited for applications where affordability, reliability and ruggedness are of prime concerns.

Series MEGA Sroat is offering large sizes of Electromagnetic Flow meters introduced by Manas. The sizing ranges from DN400 diameter to DN1600 diameter. Some of the application areas include : Large Water supply schemes, Sewage measurements and Municipal Water supply schemes. These flow meters are very accurate(Typically 0.5% of actual flow rate). Hard ebonite rubber lining makes these meters suitable for measurement of Raw Water containing even abrasive sand and quartz particles, mud etc. and still delivering long life. This Series is also suitable for sewage applications.   PRINCIPAL ADVANTAGES : • Robust, rugged, welded steel/stainless steel construction withstanding to IP68.• Very much suitable for submerged or buried application.• No Pressure Drop across the sensor, being full bore construction.• Measurement independent of un-dissolved solids.• Long lasting Ebonite rubber lining gives long life of sensor.• End connection flanges as per customer's Requirements.• Much better accuracy compared to other types of meters in its class.   APPLICATIONS :   • Extremely useful for large water supply schemes.• Suitable for Sewage measurements• Municipal water measurement schemes.

The working of these meters is based on Faraday’s Second Law of Electromagnetic Induction. It states that, a conductor moving in a magnetic field with the direction of its motion perpendicular to the magnetic field generates an EMF across it and the direction of the EMF is perpendicular to both, the magnetic field and the direction of motion. The generated EMF is proportional to the magnetic flux density, B, the velocity of conductor v and the length of the conductor l. In the flow meter the magnetic field is generated by exciting the coils and the conductor is the liquid itself, under measurement with the length equal to the diameter of pipe.

The Manas make Electromagnetic Flow meter called as Sroat 1000 virtually approaches the ideal flow meter suitable for wide range of liquid flow measurement even with very low velocities and conductivities. Some of the industrial applications include: Effluent treatment plants, Sewage treatment plant, Water supply schemes, Steel industry, Sugar industry and distillery, Pulp and paper, Chemical and pharmaceutical, Food and Drug industry.The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement being based on Faraday's law of electromagnetic induction, is independent of visocity, density, pressure & temperature of flowing medium. The measurement is not affected by solid impurities as long as the min. conductivity of 5µs/cm is available.  It is a true volumetric flow measurement.We offer various materials of construction for meter lining & electrodes to cover majority of corrosive liquids. The technique called as “ Pulsed DC ” is used which offers very high zero stability & accuracy of measurement. The standard current output of 4-20 mA DC is provided which is linearly proportional to volumetric flow rate.   PRINCIPAL ADVANTAGES : • Use of pulsed DC magnetisation & auto zero technique offers excellent long term zero stability.• Measurement is independent of velocity profile across the diameter of the pipe-line.• Measurement results are independent of density, viscosity, pressure, temperature , solid - impurities & conductivity variations [above 5 µs / cm].• No additional pressure drop across the meter which relieves the process designer while sizing his pumping requirements. Simple to install as no special precautions of straight pipe lengths required.• Compatible with virtually all corrosive / non-corrosive liquids.• Protection class offered IP 65.• Reasonably higher ratio of Return on Investment to Investment.   APPLICATIONS :   This meter is more suitable with those fluids which present difficulties in handling. Fluids such as effluents, slurries, pulps, brines & other highly corrossive liquids, acids & bases, fermenterwash, molasses etc.    Following industries can find lot of application of this flow measurement technique.• Effluent Treatment Plants• Sewage Treatment Plants.• Water Supply Schemes.• Steel & Aluminium.• Sugar Industries & Distilleries.• Pulp & Paper.• Chemical / Pharmaceutical.• Petrochemicals / Fertilizers. • Food & Drugs.

Insertion Type Electromagnetic Flow Meter is an Ideal solution for water flow measurements in large diameter pipes. Most economical as compared to its counterpart in full bore measurement or ultrasonic measurement. Insertion Type Electromagnetic Flow Meter is an Ideal solution for water flow measurements in large diameter pipesThe Manas make Insertion Type Electromagnetic flow meter, called SROAT - 1000i is an ideal solution for water flow measurement in large diameter pipes. Fairly good accuracy of measurement (typically ± 1% of flow rate) can be achieved with little care in installation of probe and transmitter. The electrical conductivity of liquid under measurement can be as low as 20 µS/cm. Being insertion type, there is virtually no pressure loss. Most economical as compared to its counterpart in full bore measurement or ultrasonic measurement.  The technique called as “ Pulsed DC ” is used which offers very high zero stability and accuracy of measurement. The standard current output of 4-20 mA DC is provided which is linearly proportional to volumetric flow rate.   PRINCIPAL ADVANTAGES : • Excellent long term zero stability using pulsed dc magnetisation and auto zero technique.• Measurement results are independent of density, viscosity, pressure, temperature, solid-impurities and conductivity variations (above 20    µS/cm )• No additional pressure drop across the meter.• Compatible with virtually all corrosive / non-corrosive liquids.• IP-65 class of protection offered.   APPLICATIONS :   Following industries find application of this flow measurement technique• Water Supply• Public Services & Utilities• Effluent Treatment Plants• Pharmaceutical Industries• Sugar Industries & Distilleries• Food & Drugs

• Suitable For compressed gas & air • Linear or Square Root operation. • Accuracy of ± 0.25 % of Full Scale. • Three nos. of 4-20 ma dc i/p from DP / Flow transmitter, Pressure transmitter,   Temperature transmitter/RTD PT-100. • Universal power supply. • Isolated 4 – 20 mA output proportional to Flow rate. • 4 digit LED display for flow rate & 6 digit for total flow is available. • Serial Interface with Computer through MODBUS RTU Protocol. • Two numbers of alarms is available on instantaneous flow rate. • If Flow rate exceeds the set reference flow, the lower 4 digit Display for Flow rate   blinks.

The GFMc-150 flow meter is applicable for measuring flow rates of Bio-gas, LPG, Compressed air and other compressed gases in closed conduits. It is best suited for  applications where affordability, reliability and ruggedness are of prime concerns.In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.Unfortunately density of compressible fluid is never constant. The density of compressible fluid changes with line pressure and line temperature. Thus, introducing errors in flow rate measurement.  

These meters are based on the principal of differential pressure generated by Orifice element. Designed as per ISO5167BS1042. On line density compensation delivers very accurate results. Various Types of IBRNon IBR valves for isolation and drain. Various Sizes of Orifice Assemblies with or without IBR Certificate. Complete System is Engineered to suite your requirements. Highly Reliable and Repeatable System; No Moving Parts. Easy for Calibration.

Manas have now introduced a new type SMART JAL Ec Flowmeter. SMART JAL EC meter's are commonly used in Treated Effluent, Sewage water, Waste water etc..Features : • No moving parts.• Economically Priced.• Do not equire much upstream and downstream straight Lengths.• Very fast Operation / small response time.• Long life hence cost effective.• Engineered in PP• Flowmeter does not obstruct flow, so it can be applied to clean, sanitary,  dirty, corrosive liquids.• Fully Vibration proof. 

Display : Digital

Brand Name : Manas

End Connections : Threaded, BSP (M)

Accuracy : 1% of Actual Flow Rate

The Digital draft gauge 4475-PX accepts the draft pressure input as the signal and displays it in terms of mmwc. It also delivers 4 -20 mA output proportional to the Draft. The Draft transmitter is a field mounting unit and is a two wire system delivering 4-20mA output proportional to Draft Input. The Transmitter can be mounted in the field thereby avoiding long lengths of impulse lines and also errors due to the lengths. Principal Features : • Digital Display (so No Confusion) • Much Better Accuracy compared to Mechanical Gauges. • Wide Range of Draft measurement possible. • Typically, ±50 mmwc to ± 750 mmwc. • Transmitter being Field Mounted, Errors due to Long Impulse lines are avoided.

BTU 100 L is a versatile compact energy totalizer extremely useful for measurement of energy conversion. It measures the thermal energy required for air conditioning. It accepts 3 inputs, each one from a flow meter for chilled water, inlet temperature sensor and the outlet temperature sensor. From this it calculates the thermal power and energy consumed in maintaining the temperature at given level. 9 digits are available for total energy and four digits are available for instantaneous power reading. The engg. Unit can be selected by user, either as KW & KWH Or BTU / Hr & BTU Advantages : • Compact Wall mounting design with IP 65 Enclosure.• 16x2 LCD for total energy as well as instantaneous power.• Display of chilled water flow, power temperature available.• Choice of mounting either on inlet or on outlet as per site conditions.• Choice of Engg. Units : KW or BTU.• Data storage up to 1 year with hourly storage facility with real time.• Storage can be viewed by scrolling keys.• Serial Interface with computer through MODBUS RTU.     BTU Meter For heat transfer application, SERIES : HET-100L • Suitable for Thermic fluids like HYTHERM 500, HYTHERM 600, DOWTHERM A,    DOWTHERM T etc. • Output in terms of 4-20mA which is proportional to Power obtained. • Communication Port (supports MODBUS-RTU) & Data Logging facility. • Password protection on all programming modes (except display mode) to avoid   wrong programming by an unauthorized person. • Display of 16 x 2 Big Characters LCD with BLUE Backlight. • Buzzer indication for faults/Error with blinking LED (Programmable). • Fault Conditions - Indicated by different Error Codes. • Accuracy of ± 0.25 % of Full Scale. • Ingress Protection: IP65 Equivalent

We are dealing in btu meter, Based on calculations of thermal power & energy consumed through measurement of flow, temperature difference of inlet & outlet of the medium. 4-20 mA output proportional to power output 16x2 LCD, 9 digits for total energy & 5 digits for instantaneous power. The engineering unit can be selected as either KW & KWHr or BTUHr & BTU. Communication port RS 232485 is available with MODBUS RTU. Backup of totaliser on power failure in non volatile memory Logging history can be viewed on the screen Ingress Protection: IP65 Equivalent

Manas have now introduced a new type of Battery Operated Electromagnetic Flow meter series. The new type of flow transmitter is SS1020. It is available with integral or remote version of transmitter. Battery Operated Electromagnetic Flow meter is specifically designed where Electric supply is not available & accurate flow measurement is essential.

Display : Digital

Brand Name : Manas

Air flow meter is applicable for measuring flow rates of Bio-gas, LPG, Compressed air and other compressed gases in closed conduits. It is best suited for applications where affordability, reliability and ruggedness are of prime concerns. In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.