Auto Loader Dealers

Industrial process need production by loading the M/C and process at reuired speed and eifficency by loading the row material and production product without human inpervention of partial dependance need auto loader for hoper feed system

JD series Auto loader offer a wide choice of loader-blower sets and are designed for higher through puts from 250kg-1200kg. The unit are supplied with a separate 3-phase floor standing blower station which is low noise & maintenance free. JD units are also available with two material lines with a common blower & can cater two machine simultaneously. Imported high speed commutator motor, small cubage and strong suction. Connection between operation controller and electric control box free and convenient  operation. The micro computer controls and the accurate action.  Out hanged air storage device to thoroughly clean the dust on the strainer.   Features： – The Auto Loader’s main engine and the material hopper are designed separately and thus it is safe, easy and convenient to be operated. – The whole operation in Auto Loader is controlled by Microchip computer. – Equipped with an independent filter, Our Auto Loader is very convenient to clean up dust. – The equipped muffler reduces the noise in operation unlike any other Normal Auto Loader – Stainless steel material Auto Loader is light in weight, durable and very convenient for cleaning the device. – The control box being designed separately is easy to maintained. – Auto-buzzer will give alarm in-case of Leaking material or shortage. – Auto-protective device protects motor against overloading. – The bunker with electronic eye can be installed on the charging inlet of molding machine directly. – Can select two-material proportional valve, used for new material mixed Grinned material using or instant receiving of Grinned material. – Induction type motor of Auto Loader has strong suction force & long service life. – Independent filter, convenient for cleaning accumulated dust.

TECHNICAL SPECIFICATIONS Diameter 6 1/2" borehole Depth 363 mtr Application Water Well Drilling Rig Formation soft / hard PRIME MOVER Truck mounted Rig with power from Truck Engine /deck Engine MOUNTING The rig unit is mounted on a suitable Truck MAST Box type structure Max Capacity - 20 tons (44,000 lbs) Height - 8 mtr (27 ft) Rod handling capacity - 6.0 mtr (20 ft) PULL UP SPEED 39 mtr/min (118 ft/min) PULL UP FORCE 10750kgs (20240 lbs) PULL DOWN FORCE 6318 kgs (13900 lbs) PULL DOWN SPEED 50mtr/min (167ft/min) HYDRAULIC SYSTEM 210 kg / cm2 / (3000 psi) JACKS Four Hydraulic jacks COMPRESSOR SUITABLE COMPRESSOR

The system is used for lifting of plastic granules from the material bin in the machine hopper. Compact powerful blower for quick and easy cleaning. Easy to clean filter. Bigger size of filter is used for dust collection. Switching operation is controlled by best quality timers. Eliminates risk of contamination and spillage and saves on labour. The main receiver hopper mounted on machine hopper. Automatic and easy operation. Portable unit. Capacity : Upto 1000 kg/hr

Features   Material hopper separates with main controller.safer and more convenient With isolated filter, it is easy to clean It is equipped with the special device to reduce the working noise Material hopper is made of stainless steel,light and durable Separately-designed controll chest is operated by micro computer It is equipped with motor auto protection device Warning device works automatically when lacking material Motor can rotate anti-closewise to get rid of dust

Mass OUTPUT : Fills 300-hole plate s. The loader can Fill 4 to 5 manual capsule filling machine trays depending on the quality Of the capsule & the operator skill. Drive :0.25 HP 3-phase 50 Cycles Dimension : L 585XW525XH1015mm Weight : 120 Kg. UNIQUE FEATURES: Low investment. High output. Available in GMP model with SS-304 claded-Body. Simple to operate. Can be handled by semiskilled personnel. Easily removable parts. Spares readily available. Sturdy fabrication - assured durability and long service. Designed to fill all standard - size capsules. Automatic Empty capsules Tray loader with manual filling machine: � Loader with one MCF - 9000 capsuleshr with 2 operators. � Loader with 2 MCF - 18000 capsuleshr with 3 operators. � Loader with 3 MCF - 27000 capsuleshr with 4 operators.

Cabinet-Style, Floor Mounted Twin Auto Loaders are available in three combinations: CNC manufactured with powder coated finish Heavy duty regenerative vacuum pump Unique silicon & SS flapper design Material receiver belly for primary and secondary loading Quick removable clamps for material and vacuum hoses Micro PLC controller to supervise the operation, faults management along with display messaging of system parameters of twin loader Pneumatic actuated cylinder to change the vacuum from primary receiver to secondary Service window for easy service of receiver belly in case of JIT Receiver CRS receiver & SS as optional Flexible, transparent hoses of PVC/ PU material for visibility of conveying material Caster wheel mounted cabinet for easy movement Cartridge type dust replant high efficiency paper filter Adjustable material pick-up tube for air to material ratio Audible alarm with message for faults like material shortage & pump tripped Password facility to avoid any kind of unauthorized handling SS Mesh Filter of 530 microns separates the resin from the air in the receiver belly ATM valve helps in avoiding frequent on/off of vacuum pump World wide proved Siemens make electrical switchgears for safety & reliability Option available for pneumatically operated ratio loading & vacuum takeoff box Integrated limit-switch activates material demand C-Clamp for easy removal of top hood in the receiver belly for easy cleaning Working Principle: Bry-Air Twin Loader ensures that the material is always available at both the Primary and Secondary receivers. These Loaders are designed for conveying of un-dried and dried material at both points. When the power is switched On i.e. when start key is pressed, the vacuum blower starts and the solenoid valve of primary receiver get energized starting the primary loadings. After completion of primary loading, the solenoid valve of secondary receiver get energized and secondary loading starts. At the same time primary receiver belly dumps material into hopper and a signal goes to the controller for next cycle. After completion of the both cycles, primary as well as secondary, the controller checks at which station material is required. If primary loader doesn’t need more material, the controller will switchover the loading to secondary loader and vise-versa. If both station do not require material, after a set delay time vacuum blower stops. Whenever the material is required by any station, the blower starts again and work as per the above sequence. The three combinations available in twin loader are: Flapper & Flapper Type Receiver – When both the primary as well as secondary receivers are mounted on the Hoppers for conveying of un-dried material to two drying hoppers. Flapper & JIT (just In Time) Type Receiver – When one receiver is mounted on the Hopper for loading of  un-dried material and secondary receiver directly on the throat of the machine for conveying of dried material JIT (Just in Time) & JIT (Just in Time) TYPE RECEIVER – When both the primary as well as secondary receivers are mounted directly on the throat of the machine and for conveying dried material.

This equipment is for automatic loading of cathodes for Lamps. It has 8 gates to separate & load cathodes automatically onto the Mount Machine cathode Loading conveyor at the speed of 1200 pcs / Hour. This equipment can be used for GLS , FTL and CFL Cathodes  

Our company is offering a wide range of Auto Loader which ensures that the hopper is always full. These auto loaders are provided with a ladder stops loading material that automatically restarts the loading as soon as the material level inside the hopper falls. Our range is renowned for precise dimensions and trouble free performance.