UsageHeating Up The Mould And Maintaining Temperature
ModelStandard And High Temperature
Number Of FlowerMold Temperature Controller
SeriesSTM-W
STM-W series water heaters have both standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by either indirect cooling (For high temperature and high temperature plus pressure models) or direct cooling (For standard models). It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ±0.5℃.
STM-W series water heaters have both standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by either indirect cooling (For high temperature and high temperature plus pressure models) or direct cooling (For standard models). It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ±0.5℃.
Usage : Heating Up The Mould And Maintaining Temperature
ApplicationDesigned For Use With Mould Heaters, Water Chillers
FeatureModularized Combination For Convenient Installation And Maintenance.
IndustryPlastic Industry
SFR series water flow regulators are designed to work with mould heaters, water chillers and cooling towers, which can be connected to more than one mould connectors. They have the function like temperature and flowrate displays, flowrate control in order to meet the requirement of different working conditions. Modularized combination ensures convenient installation and maintenance. It is a necessary device for modern plastic industry to improve its moulding efficiency.
SFR series water flow regulators are designed to work with mould heaters, water chillers and cooling towers, which can be connected to more than one mould connectors. They have the function like temperature and flowrate displays, flowrate control in order to meet the requirement of different working conditions. Modularized combination ensures convenient installation and maintenance. It is a necessary device for modern plastic industry to improve its moulding efficiency.
Number Of Flower : Water Flow Regulator
Application : Designed For Use With Mould Heaters, Water Chillers
Feature : Modularized Combination For Convenient Installation And Maintenance.
UsageCooling Moulds To Reduce Products Molding Cycle
SICC-W-R3 series are applicable for cooling moulds which reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of cooling.
SICC-W-R3 series are applicable for cooling moulds which reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of cooling.
SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master batch or additives. A gear motor with gear ratio of 38:1 is coupled to a dosing screw of 12, 16,20 or 30mm(0.47, 0.63,0.79 or 1.18inch) in diameter to give a total of four models with output ranging from 0.1~110kg/hr(0.22~242.5Ib). Double-color dosers is available for collocating with any two of single color dosers if required. Five components automatic mixing can be realized if customers adopt four-color dosers.
SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master batch or additives. A gear motor with gear ratio of 38:1 is coupled to a dosing screw of 12, 16,20 or 30mm(0.47, 0.63,0.79 or 1.18inch) in diameter to give a total of four models with output ranging from 0.1~110kg/hr(0.22~242.5Ib). Double-color dosers is available for collocating with any two of single color dosers if required. Five components automatic mixing can be realized if customers adopt four-color dosers.
UsageEnhancing Efficiency And Protecting Operator's Safety
ConnectionFilter And Fast Connection Provided For Easy Operation
The Vertical Transporter of SVT series are used for taking over the products of the robot, enhancing its efficiency and protecting operator’s safety. This series can be connected with robot signals, and precise catch and protection of products. There is a filter and fast connection is provided to facilitate the operation. The vertical stroke can be adjusted according to height of the injection moulding machine and robot.
The Vertical Transporter of SVT series are used for taking over the products of the robot, enhancing its efficiency and protecting operator’s safety. This series can be connected with robot signals, and precise catch and protection of products. There is a filter and fast connection is provided to facilitate the operation. The vertical stroke can be adjusted according to height of the injection moulding machine and robot.
Number Of Flower : Vertical Transporter
Usage : Enhancing Efficiency And Protecting Operator's Safety
Number Of FlowerVertical Molding Machine Swing Arm Robot
MaterialMetal
ColorGrey
SizeStandard
Introducing the Vertical Molding Machine Swing Arm Robot SVS. This metal robot in sleek grey color is designed for vertical molding machines. Its standard size ensures compatibility with various setups, offering precision and efficiency in automated operations. Streamline your manufacturing process with this advanced robotic solution.
Introducing the Vertical Molding Machine Swing Arm Robot SVS. This metal robot in sleek grey color is designed for vertical molding machines. Its standard size ensures compatibility with various setups, offering precision and efficiency in automated operations. Streamline your manufacturing process with this advanced robotic solution.
Number Of Flower : Vertical Molding Machine Swing Arm Robot
ApplicationMixing Plastics As Raw Materials, Masterbatch, And Recycled Materials.
AlignmentVertical
FinishingPolished
Cannot Be Used ForDealing With Plastic Powder, Foods, Chemicals, Inflammable,
SVM-U is mainly used for mixing plastics as raw materials, masterbatch and recycled materials. SVM-U can not be used dealing with plastic powder and all kinds of foods, chemicals, and inflammable, explosive and volatile materials. Bulk density should be taken into account when the dimension of material is uneven or in other forms.
SVM-U is mainly used for mixing plastics as raw materials, masterbatch and recycled materials. SVM-U can not be used dealing with plastic powder and all kinds of foods, chemicals, and inflammable, explosive and volatile materials. Bulk density should be taken into account when the dimension of material is uneven or in other forms.
Application : Mixing Plastics As Raw Materials, Masterbatch, And Recycled Materials.
VL series venturi loader use fast flowing pressurized air to create a vacuum that is used to convey various plastic granules. Air pressure is around 6~8kgf/cm2
VL series venturi loader use fast flowing pressurized air to create a vacuum that is used to convey various plastic granules. Air pressure is around 6~8kgf/cm2
ApplicationRemoval Of Sprue And Products From Injection Molding Machine
Arm ConfigurationOne Arm And Double Arms, Standard And Telescopic Arm(s)
Suitable Mold Types2-plate Mold, 3-plate Mold, Hot Runner System
Z-axis Stop PointsMultiple Stop Points
Y-axis ServoSingle, Short Cycle Time Mold
The ST2 series robot is designed for rapid and precise removal of sprue and products from injection molding machine. One arm and double arms, standard and telescopic arm(s) are selectable according to the application of 2-plate mold, 3-plate mold or hot runner system. Multiple stop points in Z axis, convenient for package. Suitable for injection molding machine under 450T clamp force. Y-axis servo suitable for single, short cycle time mold. Stacking function provides multiple stop points in Y1 and Z axis. X-axis servo is suitable for frequent mold application, easy to adjust crosswise stroke. Stacking function provides multiple stop points in X1 and Z axis.
The ST2 series robot is designed for rapid and precise removal of sprue and products from injection molding machine. One arm and double arms, standard and telescopic arm(s) are selectable according to the application of 2-plate mold, 3-plate mold or hot runner system. Multiple stop points in Z axis, convenient for package. Suitable for injection molding machine under 450T clamp force. Y-axis servo suitable for single, short cycle time mold. Stacking function provides multiple stop points in Y1 and Z axis. X-axis servo is suitable for frequent mold application, easy to adjust crosswise stroke. Stacking function provides multiple stop points in X1 and Z axis.
Number Of Flower : Servo Driven Robot
Application : Removal Of Sprue And Products From Injection Molding Machine
ApplicationInjection Molding Machine Under 450T Clamp Force, Single Face Mold With 1 Or 2 Cavity
Cycle Time7 To 9 Seconds
Production EfficiencyImproved
Product QualityEnhanced
Suitable for injection molding machine under 450T clamp force. The system designed for single face mold with 1 or 2 cavity. Place labels and take out products automatically and rapidly, cycle time is 7 to 9 seconds, improve the production efficiency and the product quality.
Suitable for injection molding machine under 450T clamp force. The system designed for single face mold with 1 or 2 cavity. Place labels and take out products automatically and rapidly, cycle time is 7 to 9 seconds, improve the production efficiency and the product quality.
ApplicationRemoval Of Products From Injection Molding Machine
TypeServo Driven Robot
Arm TypeStandard, Telescopic
Compatibility2 Plate Mold, Hot Runner System
Clamp Force CompatibilityUp To 3600T
UsageInjection Molding Automation
The ST3 Series robot is designed for rapid and precise removal of products from injection molding machine, and place them at desired locations. Standard and telescopic arm are selectable to cooperate with 2 plate mold or hot runner system. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 3600T clamp force
The ST3 Series robot is designed for rapid and precise removal of products from injection molding machine, and place them at desired locations. Standard and telescopic arm are selectable to cooperate with 2 plate mold or hot runner system. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 3600T clamp force
Brand Name : Servo
Application : Removal Of Products From Injection Molding Machine
Temperature controller, being used in hot runner system, is a device which keeps maintaining the required temperature value for the hot runner system. It consists of temperature control card,circuit breaker, cabinet, fan, terminal blocks and cables. The temperature control card in the cabinet controls the temperature of the hot runner product and the temperature accuracy of system. Self-protection and fault tolerance depends on the function of the temperature control card. At present, temperature controller is necesscry in the application of hot runner molds.
Temperature controller, being used in hot runner system, is a device which keeps maintaining the required temperature value for the hot runner system. It consists of temperature control card,circuit breaker, cabinet, fan, terminal blocks and cables. The temperature control card in the cabinet controls the temperature of the hot runner product and the temperature accuracy of system. Self-protection and fault tolerance depends on the function of the temperature control card. At present, temperature controller is necesscry in the application of hot runner molds.
Number Of Flower : Temperature Controller
Material : Various Materials
Packaging Type : Depends On Manufacturer
Application : Hot Runner System Temperature Control
UsageRemoval Of Sprue And Runner From Injection Molding Machine
Additional FeaturesOptional Vacuum Generator And EOAT For Simple Product Removal
Suitable For Injection Molding Machine Clamp ForceUnder 250T
The SS1 series robot is designed for rapid and precise removal of sprue and runner from injection molding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for injection molding machine under 250T clamp force.
The SS1 series robot is designed for rapid and precise removal of sprue and runner from injection molding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for injection molding machine under 250T clamp force.
Usage : Removal Of Sprue And Runner From Injection Molding Machine
ApplicationRemoval Of Sprue Or Runner From Injection Moulding Machine
Number Of FlowerRobot
Additional FeaturesOptional Vacuum Generator And EOAT For Simple Product Removal
Suitable Clamping ForceUnder 250t
The SS series robot is designed for rapid and precise removal of sprue or runner from injection moulding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for injection moulding machine under 250t clamping force.
The SS series robot is designed for rapid and precise removal of sprue or runner from injection moulding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for injection moulding machine under 250t clamping force.
Application : Removal Of Sprue Or Runner From Injection Moulding Machine
The Storage Silo is an industrial-grade steel structure designed for the storage of bulk materials. Available in a sleek gray color, it offers varying capacities based on size. Typically shipped in parts for easy assembly, this durable silo is ideal for industrial storage needs.
The Storage Silo is an industrial-grade steel structure designed for the storage of bulk materials. Available in a sleek gray color, it offers varying capacities based on size. Typically shipped in parts for easy assembly, this durable silo is ideal for industrial storage needs.
Number Of Flower : Storage Silo
Material : Steel
Application : Industrial Storage Of Bulk Materials
To achieve the aim of mixing material, screw blades are used to generate vortex. Materials are sucked towards mixing screws at the center of hopper bottom by vortex, then materials whirl upward to the top and fall down so that the evenly mixing can be fulfilled in a short period.
To achieve the aim of mixing material, screw blades are used to generate vortex. Materials are sucked towards mixing screws at the center of hopper bottom by vortex, then materials whirl upward to the top and fall down so that the evenly mixing can be fulfilled in a short period.
Introducing the Servo Standard Three Axes Servo Driven Robot, a cutting-edge industrial robot designed for automation in manufacturing processes. Crafted from durable metal in a sleek grey color, this robot offers precise movement along three axes. Packaged in a sturdy cardboard box, it's ready to revolutionize your production line.
Introducing the Servo Standard Three Axes Servo Driven Robot, a cutting-edge industrial robot designed for automation in manufacturing processes. Crafted from durable metal in a sleek grey color, this robot offers precise movement along three axes. Packaged in a sturdy cardboard box, it's ready to revolutionize your production line.
ApplicationRemoval Of Sprue And Products From Injection Molding Machine
TypeServo Driven Robot
Arm TypeStandard And Telescopic
Suitable Molds2-plate Molds, 3-plate Molds, Hot Runner Systems
Z Axis Stop PointsMultiple
The ST1-S1 series robot is designed for rapid and precise removal of sprue and products from injection molding machine. Standard and telescopic arm(s) are selectable according to applications of 2-plate molds, 3-plate molds or hot runner systems. Multiple stop points in Z axis, convenient for package. Suitable for injection molding machine with clamping force under 280 tons.
The ST1-S1 series robot is designed for rapid and precise removal of sprue and products from injection molding machine. Standard and telescopic arm(s) are selectable according to applications of 2-plate molds, 3-plate molds or hot runner systems. Multiple stop points in Z axis, convenient for package. Suitable for injection molding machine with clamping force under 280 tons.
Application : Removal Of Sprue And Products From Injection Molding Machine
ApplicationRemoval Of Products From Injection Molding Machine, Placing At Desired Locations, Arranging, Stacking, Quality Checking, In Mold Placement,Injection Molding Automation
Arm TypeStandard And Telescopic
Compatibility2-plate Mold Or Hot Runner System, Gantry Robot
Clamp Force CompatibilityUnder 300T
The ST5-S series robot is designed for rapid and precise removal of products from injection molding machine, and place them at desired locations. Standard and telescopic arm(s) are selectable to cooperate with 2-plate mold or hot runner system, Gantry Robot. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 300T clamp force.
The ST5-S series robot is designed for rapid and precise removal of products from injection molding machine, and place them at desired locations. Standard and telescopic arm(s) are selectable to cooperate with 2-plate mold or hot runner system, Gantry Robot. Capable of arranging, stacking, quality checking and in mold placement. Suitable for injection molding machine under 300T clamp force.
AdvantagesOptimized Moving Path, Suitable For Vertical Injection Molding
Flexible, multiple degree of freedom movement provides optimized moving path. This robot is widely used in palletizing, handling, processing, injection molding and other occasions. The advantages are more obvious in vertical injection molding applications. While waiting for taking out molded products, it can be programmed for post-processing such as cutting sprue, deburring, product assembly and handling.
Flexible, multiple degree of freedom movement provides optimized moving path. This robot is widely used in palletizing, handling, processing, injection molding and other occasions. The advantages are more obvious in vertical injection molding applications. While waiting for taking out molded products, it can be programmed for post-processing such as cutting sprue, deburring, product assembly and handling.
SG-43 series are suitable for centralized recycling of waste and rejected parts form injection, blowing molding and extrusion lines. This series feature compact design, easy operation and quick blade replacement. Gradually inclined cutting and integrated power design offer a better cutting effect and a lower noise level ensures low energy consumption.
SG-43 series are suitable for centralized recycling of waste and rejected parts form injection, blowing molding and extrusion lines. This series feature compact design, easy operation and quick blade replacement. Gradually inclined cutting and integrated power design offer a better cutting effect and a lower noise level ensures low energy consumption.
SG-23/30/36 series sound - proof central granulators are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding or extrusion lines. The machines feature optimized structure, easy operation, and quick blade replacement. Staggered rotating blades can easily grab and cut through materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.This granulator has various models with wide application range to meet different customer’s demand.
SG-23/30/36 series sound - proof central granulators are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding or extrusion lines. The machines feature optimized structure, easy operation, and quick blade replacement. Staggered rotating blades can easily grab and cut through materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.This granulator has various models with wide application range to meet different customer’s demand.
Number Of Flower : Central Granulator
Application : Centralized Recycling Of Wastes Or Rejected Parts From Injection Moulding
ApplicationRemoval Of Sprue And Products From Injection Molding Machine
TypeServo Driven Robot
Arm TypeStandard And Telescopic
Suitable Mold SystemsTwo Plate Mold, Three Plate Mold, Hot Runner System
Stacking Function2 Stop Points In X And Y Axis, Multiple Stop Points In Z Axis
The ST1 Series robot is designed for rapid and precise removal of sprue and products from injection molding machine, and place them at desired locations. Standard and telescopic arm(s) are selectable according to the application of two plate mold, three plate mold or hot runner system. Stacking function provides 2 stop points in X and Y axis, multiple stop points in Z axis. Suitable for injection molding machine under 850T clamp force.
The ST1 Series robot is designed for rapid and precise removal of sprue and products from injection molding machine, and place them at desired locations. Standard and telescopic arm(s) are selectable according to the application of two plate mold, three plate mold or hot runner system. Stacking function provides 2 stop points in X and Y axis, multiple stop points in Z axis. Suitable for injection molding machine under 850T clamp force.
Application : Removal Of Sprue And Products From Injection Molding Machine
About us Shini is organized into 6 different sales regions representing over 80 countries on all continents. We thereby ensure our customers access to our engineering and other services because we are located nearby. Our Tech Centers are proof of our customer commitment and are maintained and located in each sales region. Our customers can find project-based process applications in each of our Tech Centers.
Reviews & Ratings
Write a Review
Post Free Ad