Dryer / Drying Machine Dealers in Pune

Tundish heaters from Alliance Thermal Engineers are available for different purposes: A tundish pre-heater is used for quick heating up of tundish refractory. Several small heat shields with ceramic fibre insulation shall be provided for each burner to seal the gaps around the opening provided for burner firing. Tundish heaters can be designed for a single or various heating positions. Depending on the space available on casting floor, tundish heaters can be designed to heat from longitudinal or from transversal side. The ATE tundish drier is mostly designed with the soft heating system. Very low heating rates (

We are one of leading manufacturer of ddgs dryer (dry distillers grain soluble dryers). We have achieved the level of design for bellow 10% product moisture and higher syrup (dwgs) addition.our design is very different from rotary tube bundle dryer which lead more moisture contains. drying process: what is leftover in the distillation process is a nutritious mash or distiller’s grains, a very popular livestock fee.it passes trough decanter to separate fibers and thin slope, fibers directly transfer to dryer and thin slope transfer to evaporator to increase concentration up to 45% and then it transfer to drying process, mixture of decanter wet cake and evaporators thin slope (syrup) fed to our specially design dryer to get minimum moisture (bellow 10%) up to as per requirement.specifications:

Rotary dryer are used for to reduce or minimize the moisture content present in the feed. This feed material comes in direct contact with hot gas .This rotary dryer is made up of rotating cylinder and number of tubes fitted inside. OR only lifters are provided on Periphury.   We manufacturer of Rotary Dryer for Colour Speckles, DDGS etc.   The material which is to be dried enters into the dryer and since the dryer is rotating , the material is lifted up by series of internal fins lining the inner wall of the dryer. After getting high enough, the material falls down back to the bottom of the dryer , passing through the hot gas steam and thus the drying takes place . This dryer can be designed either with co-current OR counter current flow.   Advantages :   Simplicity in design. Sturdy construction. Adaptability to fluctuating feed rates and moisture contents of product Possibility of very large through puts. Can handle wide range of material . Can handle highest drying temperature.

The desiccant media can be regenerated by purging air and remove moisture it collect and remove again and again. So the dryness of the compressed air achieved up to atmospheric -40'c dew point. The traditional refrigeration type air dryer does not provide sufficient air quality required for special applications. Guru regeneration heat less dryer contains smooth uniform achieved alumina balls size tat prevents channeling of compressed air flow, which maintains low bed velocities.

We offer our clients an array of Heatless Air Dryers that are extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these heatless air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free. Technical specifications: Our range of heatless air dryers consists of the following parts: * Oil removing filter * Pre-filter * After filter * Fittings time

Total control over moisture content The Co-current type Rotary Dryer is ideal for the materials that has tendency to stick and has high moisture content. Here Air and feed are introduced from the same direction and material comes in contact of hot air at its highest temperature,which instantly evaporates surface moisture. The initial heat transfer rate is high, causing an immediate and considerable drop in gas temperature, which prevents overheating of the material and the dryer shell. The material which is in its final stage comes in contact of airgas at its lowest temperature thus enabling the easy control over the moisture.

Design of Centrifugal, Pressure and Two-Fluid nozzle Atomiser, Design of Direct & indirect Air Heaters with high thermal efficiency, Stepless integral modulating Burner Management system with multifuels including BioGas.

Sensoheat manufactures several types of Dryers, one of them is Tray Dryer, Tray dryers are electrically heated. Tray Dryer comes in 6 trays, 12 trays, 24 trays, 48 trays and 96 trays. The construction of the machine varies as per requirement of the customer. Tray Dryer is the most conventional Dryer used very widely and still being used where the moisture content is more and where the product has to be dried at low temperature for long hours.

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, expensive instruments, etc which results in the downtime of whole system. Our Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, vaporator and moisture separator) are integrated into one single unit. Features: Eco friendly refrigerant in all range of refrigeration air dryers Latest technology energy efficient heat exchangers in all models of refrigeration air dryers Very low pressure drop is a significant advantage. Refrigeration Air Dryers occupy less floor space Remote interfacing and monitoring in selected models of refrigeration air dryers Refrigeration Air Dryers provide outlet air quality according to ISO 8573-1, Table 3, Class 4 Operating Range: Refrigeration Air Dryer Capacity: 20 to 50000 m³/hr Inlet air pressure of refrigeration air dryer: 1.5 to 300 bar g Inlet air temperature of Refrigeration Air Dryer: 10 to 60°C Pressure Dew point temperature of refrigeration air dryer: +3°C Applications: Plant Air Power Plant Instrumentation & Ash conveying Steel Plant Cement Industries Food & processing Textiles Pet bottling Glass blowing Leather Industry Sugar Industry Paper mill

Shri Enterprises is a unique entity in the market, actively committed towards offering a premium quality range of MS Dryer.