Air Dryers Dealers in Pune

We offer our clients an array of Heatless Air Dryers that are extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these heatless air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free. Technical specifications: Our range of heatless air dryers consists of the following parts: * Oil removing filter * Pre-filter * After filter * Fittings time

The company is located in Chandigarh(India) and affirms to offer the entire array of products to every nook and corner. Assistance of a sophisticated packaging system and professional packing team, we have become capable of meeting the exact requirements of the clients. In addition, we ensure zero damage at buyer's end.

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, expensive instruments, etc which results in the downtime of whole system. Our Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, vaporator and moisture separator) are integrated into one single unit. Features: Eco friendly refrigerant in all range of refrigeration air dryers Latest technology energy efficient heat exchangers in all models of refrigeration air dryers Very low pressure drop is a significant advantage. Refrigeration Air Dryers occupy less floor space Remote interfacing and monitoring in selected models of refrigeration air dryers Refrigeration Air Dryers provide outlet air quality according to ISO 8573-1, Table 3, Class 4 Operating Range: Refrigeration Air Dryer Capacity: 20 to 50000 m³/hr Inlet air pressure of refrigeration air dryer: 1.5 to 300 bar g Inlet air temperature of Refrigeration Air Dryer: 10 to 60°C Pressure Dew point temperature of refrigeration air dryer: +3°C Applications: Plant Air Power Plant Instrumentation & Ash conveying Steel Plant Cement Industries Food & processing Textiles Pet bottling Glass blowing Leather Industry Sugar Industry Paper mill

KPCL Diesel Engine Driven Portable Compressors are used for applications like construction & mining, General engineering etc. These units cover a wide capacity range from 5 m³min to 17 m³min & pressure range from 7 kgcm²g to 10 kgcm²g.

Heat less dryer works on the principal of absorption. Regenerative air dryers use desiccant media absorbs moisture contaminate from compressed air. The desiccant media can be regenerated by purging air and remove moisture it collect and remove again and again. So the dryness of the compressed air achieved up to atmospheric -40'c dew point. The traditional refrigeration type air dryer does not provide sufficient air quality required for special applications. Guru regeneration heat less dryer contains smooth uniform achieved alumina balls size t\at prevents channeling of compressed air flow, which maintains low bed velocities. This maintains air contact time for efficient moisture removal and minimal pressure drops. Guru have electronic control timer for pneumatically pilot valves are chosen for long life and high air flow. A pre filter, oil removing filter, after filter offering purification to 5 micron can be specified purge loss and pressure drop are kept at a minimum resulting in lower operating costs.   Working Principle       During an operating cycle inlet air directed to pre filter, here moisture and dust particles are removed then air enters to oil removing filter here we remove flooded oil. As wet air flows through the desiccant tower bed the twin tower design of our dryers allows simultaneous compressed air drying and desiccant regenerated without interruption to the compressed air flow. At the end of the drying cycle the regenerated tower is re-pressurized and tower operation is reversed automatically. After tower change over wet inlet air is directed to the regenerated tower and the previously used desiccant is regenerated by the same process. A complete cycle of drying and regeneration is 10 minutes or 6 minutes timing is precisely controlled by Guru electronic timer.   Features   Applications Easy dry series designed for pharmaceuticals, powder coating, Spray Painting, CNC Machine, CMM Printing Application units etc.,   Range   • 5 cfm to 50 cfm- Easy dry series • 20cfm to 500cfm - Heatless dryer • Compact design   • Pre filter oil removing filter, after filters are standard   • Full instrumentation packages   • Counter flow drying and regeneration   • Low pressure drop less than 3 psi at rated flow   • Automatic re-pressurization   • Fixed purge orifice

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy. Drytech Air Drying Unit-HD series (Heatless) type offers quality class of air desired as per various recommendations for different pneumatic applications. The stationary air drying unit with negligible maintenance, lesser operating cost and longer service life is the right selection for pneumatically operated machines which needs purified compressed air.   Salient Features :•  Operating on ADSORP principle; Hence prevents entrainment of moisture in the pipe line however     long is may be.•  The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed     air at inlet and outlet.•  The stationary working system and requires negligible maintenance.•  Assured atmospheric dew point equal to (-) 40 deg. C. or (-) 70 deg C as required.•  Ideal purging as per desiccant manufacturers instruction for regeneration.•  Lesser pressure drop in total unit.•  Modified purge silencer causing less noise.•  Designed for Indian atmospheric condition.•  Easy for installation and commissioning.Sequence of Drying Operation.It is as per following three stagesPrefiltration :The dust particles, condensed oil and moisture in liquid droplets and aerosol from is per-filtered by set of pre-fine filter combination, The Compressed air with only vapourised from of moisture is permitted to enter the desiccant bed tower.Drying :The Saturated Compressed air is dried in desiccant bed tower.Postfiltration :The dry compressed air is refiltered in after filter for removal of residual fine particles if any.   Heatless Air Dryers   Mini Dryer   Request a Quote     Operation :The complete ADU operates in following three modes.Drying Mode :The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (Operated by electronic timer) to the desiccant bed tower. The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point.Regeneration Mode :The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower. The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.Pressurisation Mode :To avoid the pressure fluctuations at outlet of dryer, the regeneration mode tower is put in for pressurisation before it switches to drying mode. The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing. The total cycle time is 10 minutes or 4 minutes as per timer selection for required dew point.

Compressed air is the main source of energy for all pneumatic braking systems, air suspensions and clutches in commercial vehicles. The main component in air provision is the compressor itself. Driven, as a rule, by the vehicle´s engine, it produces the necessary compressed air for all the air systems. The Knorr-Bremse product portfolio covers a wide range of requirements in terms of transport and propulsion. The range includes flange mounted - with direct gear drive, or base mounted - with belt drive, one or two cylinder compressors. They can also be supplied with our optional energy-saving system (ESS). Compressor with clutch A further Knorr-Bremse innovation is our compressor with clutch which, as well as delivering considerable savings in fuel costs, also reduces oil emission.

The vacuum drying chamber are used for drying the active part of transformers. During drying, the moisture absorbed by the transformer insulation will be extracted by the vacuum pumping system. It is possible to dry the transformer insulation and thereby reduce the condensation to negligible level by the end of the drying cycle.

Solid performance: Steady pressure dew point No chance of moisture entering the compressed air system. Simple Reliability: Quality components, generously sized Simple and proven design Effective control system (hot gas bypass). Easy Installation: Plug and play concept Single electrical connection All units pre-commissioned Self regulating. Minimal maintenance: Long service intervals Few component replacements Ergonomic design for fast access to key components

Superior performance with better mixing process This is a combination type of air flow system i.e. Counter as well as Co-current. Here Air is introduced from the top and atomizer is located at the bottom, thus providing mixed flow effect. This type of drying is slightly identical to counter current hence it is not applicable for heat sensitive material.

The importance of dry air in Machines and systems: Excellent operational performance with high quality productivity and increased machine reliability are probably the three most requested attributes that modern machinery and systems using pneumatic components must meet today. However, water contained in compressed air systems (CAS) is the leading enemy in achieving this goal. When water forms in a CAS, not only does it reduce the overall working life of the machine, it also affects the reliability of its pneumatic equipment. By installing a good quality air dryer in your CAS it effectively removes the build-up of water bringing improved performance and productivity.