Refrigerated Air Dryer
Get Price Quote
1 Pieces (MOQ)
Blowing Machine Air Dryer
55,000 Per Piece
1 Piece (MOQ)
Best Deals from Air Dryers
Refrigerated Air Dryers
70,000 Per Piece
1 Piece (MOQ)
Refrigerated Air Dryers are type of compressed air dryer, used to dry compressed air. Compressed air always contains water, coming from the air that is sucked in by the compressor. These dryers are a popular option for cooling compressed air. They use the same operating principle as air conditioning units and refrigerators. They help to dry air by passing it through a refrigerated heat exchanger. The offered Refrigerated Air Dryers are very efficient and safe for use in various industries.
Desiccant Heated Air Dryer
80,000 - 1,000,000 Per piece
1 Piece (MOQ)
Hopper Dryer
28,000 Per piece
1 Piece (MOQ)
Features : Adopting a high-performance diffusion device with uniformly dispersed hot air to ensure uniform drying temperature of materialsEnhance drying efficiency. The seperation design of barrel body and bottom base is easy to clean material. Adopting proportional deviation indication temperature controller and self cooling fan, precise temperature control and extended service life.
Hopper Dryer Heater
Get Price Quote
100 piece (MOQ)
Air & Gas Dryer
Get Price Quote
Heatless Air Dryers Operating principleIn Heatless Dryers, two vessels filled with desiccant are provided, which cycle automatically, producing Dry air continuously. In these units, wet air enters the bottom of one vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of Dry air is passed downward through the desiccant bed in the second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessels changeover automatically, and Dry air is available continuously, without any surges.Simple Design / Easy operationThis is the simplest type of Air Dryer with Activated Alumina / Molecular sieves drying agent. This design is virtually maintenance free, fully automatic, and requires no attention for years. Heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free.Low Investment / Low operating cost Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quick. Low temperature operation reduces corrosion in towers and desiccant lasts longer. Power requirement is single phase 220 /110 volts,50 Hz , 60 watts only for solenoid valves operation.
Heatless Air Dryers
Get Price Quote
We are well-established organization successfully operating from New Delhi(India); we are a reliable name in the sphere. We have hired a team of professional quality experts to carry out diverse quality tests in order to ensure zero defects at buyer's end.
Compressed Air Dryer
Get Price Quote
As, our organization has stringent quality management strategies, our complete range of products is preferred by many across the industry. Purchasers can trust us to deliver orders within the specified period. Our goods can be ordered in wholesale as well as in retail. Our sophisticated compressed air dryer works with a drying capacity of 13m3/min.
Heat Reactivated Air Dryer
Get Price Quote
We are a trusted Manufacturer, Supplier and Exporter of Heat Reactivated Air Dryer. We offer easy to install Automatic Heat Reactivated Air Dryers with air capacity of 50 to 3000 NM3/ Hr. Heat Reactivated Air Dryers offered by us are widely appreciated for their flawless performance and longer service life. Construction and Working : Heat Reactivated Type Air Dryers are utilized when necessities packed quality of extremely low Dew purpose of (-) 60°c or (-) 80°c. In this outline, the desiccant is recovered at higher temperature, as well as modest amount of Dry Air cleanse. Because of cleansing with Dry Air and warm recovery, leftover dampness stacking on desiccant comes to be low and this gives exceptionally low Dew focus. The Drying unit has 2-vessels loaded with activated alumina or molecular strainers desiccant. One vessel stays in drying cycle for 4 hours, while other vessel is concurrently recovered at air force. Around 3% stream of dryer limit is utilized as cleanse for recovery. Electrical warmers are furnished in a focal finned Stainless steel pipe in both drying vessels. Warming cycle is for 2 hours and in this time hot cleanses air increments desiccant temperature to around 100°C. At this temperature recovery is finish (because of dry air cleanse). Dew focus accomplished is around (-) 40°C. Assuming that still easier Dew focus is needed, air cleansing rate is somewhat expanded to 5% for (-) 60°C and to 7.5% for (-) 80°C Dew point. Features : Requires less attention of operatorLonger life of operationHeaters and valves are operated automaticallyOnce installed can be operated automaticallyEasy maintenance
Regenerative Air Dryers
Get Price Quote
Heat regeneration adsorption air dryers are used when one needs compressed air of very low Dew point of (-)60oC or (-)80o Deg C. In this design, the desiccant is regenerated at higher temperature, along with small quantity of Dry air purge. Due to purging with Dry air and thermal regeneration, residual moisture loading on desiccant becomes low and this gives very low Dew point.
Air Pollution Control Plant
Get Price Quote
Catering to the customers' needs with excellence, we are engaged in offering high quality lot of Pollution Plant , Good Life Etc.. For safe assembling of all the products, we have invested our time and money in the capacious storage unit that helps us in keeping the products safe till final delivery to the clients. Features : Advanced technology Precision-engineered Effective against heavy pollution
Refrigrated Air Dryer
25,000 Per Piece
1 Piece (MOQ)
Compressed Air Dryer
Get Price Quote
We are the main supplier of this product.
Sugar Hopper Dryer
Get Price Quote
Range 0.7-1.5 meter. & length up to 5-20 meter, eccentricity 15mm–16mm, final speed range 250 rpm to 300 rpmSalient Features Low power consumption Better hot and cold air blowing system Less maintenance Robust heavy-duty material
Membrane Dryers
Get Price Quote
The Kaeser Membrane Module (KMM) features a special flow concept for long-term drying efficiency as well as the innovative, high-density helical fibre structure of the high-performance hollow fibre membranes.  KMM dryers easily deliver pressure dew points in the minus range, even when installed where space is at a premium. They also play to their strengths when energy sources are unavailable or when used as end-point dryers in areas at risk of frost.  Flow rates from 0.04 to 3.97 m³/min PDP from +10 °C to −40 °C (relative temperature reduction of up to 90 °C compared to inlet air temperature) Optional versions with energy-saving purge air stop valve  Your advantages  Superior membrane design: The helical structure of the extra-fine Kaeser membrane fibres results in a high-surface area separator with low space requirements. Furthermore, effective transportation of water molecules from the outside in means the external membrane pores always remain ready to channel more water (innovative Flow Concept). Â
15Tr Air Cooled Chilling Plant Single Ckt
425,000 Per Ton
Parker Air Dryer
150,000 Per unit
Air Conditioner Receiver Driers
Get Price Quote
The company has designed and developed the Air Conditioner Receiver Driers to protect the mobile refrigeration system. Air Conditioner Receiver Driers are widely used in automobile industry. Receiver Drivers are extensively used to control and to save the moisture level while passing the air through an Air Conditioner. Along with the moisture level they are also good protector of liquid and solid contamination. Our Air Conditioner Receiver Driers are world class product and they are very popular in Automotive Industry.
Water Chilling Plant
Get Price Quote
Air Cooled Dryer
Get Price Quote
We are a prominent Manufacturer and Supplier of Air Cooled Dryer. The Air Cooled Dryer is used for Air Compressor after treatment. These Air Cooled Dryer offered by us, are known for their high performance and longer working life. We offer Air Cooled Dryer in varied specifications to meet the requirements of different industries.
Air and Water Pollution Control Plant
Get Price Quote
Refrigerated Air Dryers
34,000 Per Piece
01 Piece(s) (MOQ)
Forced Hot Air Treatment Plant
950,000 Per Piece
Forced Hot Air Treatment Facilities for Solid Wood Packaging Materials as per ISPM-15 We manufacture Forced Hot Air Treatment Facilities for Wood Packaging Materials as per ISPM-15 These Facility can be HSD Fired, Gas Fired and Electrically heated as per following features : Automatic Temperature Control Temperature Accuracy plus minus 0.3 Deg.C Software Designing as per ISPM-15 HSD FiredGas Fired and Electrical Option FHAT as per your Size requirement PID Control PT-100 Sensor Paper Less Temperature Recorder Safety of Operation Fixed and Movable type Option Insulation 15 CM All Sides
Air Stripper Tower System
1 - 175,000 Per Set
1 Set (MOQ)
Refrigerated Air Dryers
Get Price Quote
We are one of the leading Manufacturers & Suppliers of Refrigerated Air Dryers. The Refrigerated Air Dryers are fabricated by our engineers using cutting-edge technology and superior quality parts and components. The Refrigerated Air Dryers supplied by are robustly constructed, sturdy, efficient and durable. Clients can avail quality tested and highly functional Refrigerated Air Dryers from us at competitive prices. Construction & Working : The basic principal of operation of the Refrigerated Air Dryer is the removal of moisture by cooling air to certain preset temperature. The air entering the system enters into the precooler. A Precooler is a heat exchanger where the incoming hot air is being cooled by the outgoing cold air so as to reduce the heat loads for the evaporator and thereby the refrigeration system. When the air is cooled, i.e., when the heat is removed from the air, the water vapour will get condensed. It is easy to remove the moisture as a condensate than the moisture in water vapour state. The air from the precooler enters into the Evaporator. In evaporator the cooling, heat removal is done by the boiling refrigerant requires heat to boil. This heat is evolved from the air. Air is cooled to 2 o 4 c. When the temperature drops, the moisture turns to condensate moisture is a form of water. The air with condensate enters into moisture separator where the moisture is removed with the help of auto drain centrifugal action of air during the centrifugal passage of air, moisture being the denser medium. The refrigerant circuit consists of a compressor, a condenser, a filter dryer, expansion valve or a capillary tube and an evaporator. The low temperature refrigerant vapour enters the compressor. Compressor rises the pressure of the refrigerant. Also the temp of ref. gas. The hot, high-pressure refrigerant enters into the condenser. In the condenser, heat is removed from the refrigerant by circulating cold air using the Fan. The low temperature, high-pressure liquid enters the filter dryer, where the dirt contents are removed. The refrigerant, then passed into the expansion valve, The temperature of the refrigerant leaving the expansion valve will be – 1 C, This low-pressure liquid refrigerant enters the evaporator. In the evaporator, the refrigerant boils and becomes low-pressure vapour. The Vapour enters the compressor and the cycle continues.
ZZ Plant: Adroid Palm (Air Purifier)
599 Per Piece
01 Piece(s) (MOQ)
Hot Air Drier
100,000 - 500,000 Per Feet
1 Feet (MOQ)
1 ,ss 304    2 ,Ms                                                                                Hot Air Dryer is especially prepared for drying nearly all kinds types of natural Yarns such as Polyesters, Cottons, Viscose, Acrylic, Silks, Wool, Hanks and Cones. Construction: Exterior has completed of completely protected stainless steel square pipes and packed with mild steel sheets with powder coated paint finishes. We have huge experience of more than 15 years in manufacturing and supplying laboratory hot air oven machine and dryer products. Insulation: Dryer cabinets are completely protected with 50mm of thick glass wool for avoiding Heat Losses / Heat Leakages.   Â
Desiccant Air Dryers
Get Price Quote
MVS Engineering is one of the oldest air dryer manufacturers in India. We are able to deliver custom built solutions in accordance with our customers’ exacting requirements.We offer air dryers ranging from flows as low as 1 nm3hr to very high flows up to 10,000 nm3hr.
Compressed Air Dryer
55,000 Per Piece