Loading Machinery Dealers

Ambica Auto Tech is a leading manufacturer of Hook Loaders is primarily a container handling system for trucks used to lift containers or body to lift machineries Ambica Auto Tech offers Hook Loaders from 7 T to 30 T capacities and also deal in cranes like hoists and cranes, telescopic cranes, sky lift cranes, Top seat cranes, bridge cranes, small cranes, big cranes etc once the container is loaded, it can be rolled down to dispose the loaded material at the construction site. Hook Loaders are widely used in garbage handling and scrap handling also offers hook loaders to the clients in different specifications. Features: Sturdy High performance Affordable rates.

Attached with Intralox inlet outlet conveyors Auto loading and unloading for rings. Loading height suitable for manual loading Cycle Time: 16 secs Tooling Setting time < 20 mins Pneumatics: Festo / SMC HMI touch screen 7 inch Switch gears: Schineder, Siemens. Lubrication Unit for Taper measuring station.

Digital display of Length and Load. Tare set facility for load indicator to set off dead weights of clamps, springs, etc., and to read actual load directly. Length reset facility for length indicator at any position of moving platen to indicate actual deflection. Fully automatic test with single button test start. Easy to program controller. This equipment is extremely versatile for conducting a variety of tests, on different materials as per national and international standards.

We manufacture various types and capacity of buckets like Excavators buckets, Loader buckets, Mud buckets, Digging buckets etc. Our buckets are available in suitable sizes for 3, 6, 12, 20 & 30 ton excavators, width from 500 mm to 1250 mm.Spare Parts: We provide all spare parts like Pin Bush, Tooth Holders, Tooth Points and Side Cutters as per various makes of buckets.Bucket Repairing : We rebuild and repair Excavator, Loader, and Backhoe Buckets with new steel and welding. Excavator buckets can fail due to corrosion or due to heavy usage that literally wears away the steel or breaks the welds. This excavator bucket is used in a gravel pit. A new rock bucket can cost in hundred thousands of rupees, repairing an existing rock bucket is always an option. And we are expert in repairing as to match original bucket.The bottom of the bucket has already been cut out and will have to be replaced with harden steel on which the new tooth shanks will be welded. Abrasive resistant steel (Hardox 400) offers much better wear resistance than the mild steel. We guarantee the highest standards of technical advice and manufacture and repair of all types of buckets on the basis of a genuine and realistic relationship with clients.

We are a well-reputed Manufacturer and Supplier of Automatic Loader Machine in Maharashtra, India. Auto Loader machine is designed for the picking & placing of pipe components. The operator needs to load the components to be machined in gravity chute; picking gripper picks new components and waits for components under machining. After getting cycle completion signal, it picks the finished component from second gripper and places fresh component & releases finish component on o/p conveyor. Autoloader operations are completely an integral part of CNC machine with the proper interlocks

Model OP 200 Basic Capacity Kg 200 Kg. Mast Type Mono Platform Size(LxW) mm 600 x 530 Lowered Height mm 700 Raised Height mm 1550 Shut Height mm 1480 Extended Ht mm 2300 Wheels Nylon

KAMLIFT On MCV, HCV Description : The Hook Loader Truck is widely used in the collection and transportation op open and closed top containers such as static-portable type refuse compactors, from various locations to Transfer Stations and Land-fills where the contents are offloaded by hydraulic tipping. The combined use of a crane and hook loader is an ideal solution for many varied applications. Application : Chassis mounted hydraulic loading crane

We manufacture various types and capacity of buckets like Excavators buckets, Loader buckets, Mud buckets, Digging buckets etc. Our buckets are available in suitable sizes for 3, 6, 12, 20 & 30 ton excavators, width from 500 mm to 1250 mm.Spare Parts: We provide all spare parts like Pin Bush, Tooth Holders, Tooth Points and Side Cutters as per various makes of buckets. Bucket Repairing : We rebuild and repair Excavator, Loader, and Backhoe Buckets with new steel and welding. Excavator buckets can fail due to corrosion or due to heavy usage that literally wears away the steel or breaks the welds. This excavator bucket is used in a gravel pit. A new rock bucket can cost in hundred thousands of rupees, repairing an existing rock bucket is always an option. And we are expert in repairing as to match original bucket.The bottom of the bucket has already been cut out and will have to be replaced with harden steel on which the new tooth shanks will be welded. Abrasive resistant steel (Hardox 400) offers much better wear resistance than the mild steel.We guarantee the highest standards of technical advice and manufacture and repair of all types of buckets on the basis of a genuine and realistic relationship with clients.

We offer a range of Hydraulic Ramp that has high tensile strength. Our Hydraulic Ramp, offered by us has corrosion resistant properties, as it is fabricated using the best quality raw material. Hydraulic Ramp provides unmatched service with low cost maintenance. Hydraulic Ramp is used for moving the material form one level to another easily. Details Hydraulic Ramp With Power PackScissorType/Parallelogram Type MS/SS topSize : L 77",W 22",H 800mmClosing Height : 110mm & abovePower Pack-Push Button OperatedHand Lever OperatedWith 1HP CramptanGodrej Motor

The Yale solution to comfortable and efficient first and second level order picking Yale MO series of low level order pickers is one of the most efficient and cost effective solutions for the fast efficient picking of customer orders.  Available with a fixed or lifting platform with independent fork lift for first and second level picking the MO series also includes a scissor lift option for ground and occasional second level picking. This series of order picker lifts is ideal for cross docking and load shuttling as well as order picking in: Intensive and high throughput warehouse operations Horizontal transport over short and long distances Ergonomic features Scooter control with electric steering. This allows the operator to remain within the footprint of the truck, reducing operator fatigue and ensuring them greater protection Low step height reduces operator fatigue and facilitates easy crossover between racks. The large suspended platform with personnel present sensor completely covers the platform.  This allows the operator to find their ideal  operating position The effortless electrical steering and automatic speed reduction on cornering ensure excellent control and high productivity On low level models the foot controlled platform allows second level picking to reduce operator fatigue The anti-roll back system on ramps and gradients ensures efficient operation    Productivity features The AC drive motor delivers high performance acceleration, travel speed and braking making the MO series ideal for stop and go applications Adjustable performance settings allow the truck to be customised to the needs of the application and operator Coasting and fork lift/lower function buttons located on both sides of the truck allow the operator to walk next to the operator and lift and lower the forks without being on board helping to reduce operator fatigue and increase productivity Side battery extraction is available on all models provides fast and effortless battery changing for extensive shift operations

Hydraulic ramp, MEAT designed its electro hydraulic ramps in order to make goods' loading and discharging procedures easier for any type of vehicle, ensuring safe working conditions. They consist of a self-supporting frame, made of electro welded structurals, and a chechkered platform.