Automated Valve Dealers

The D-1 Automatic Drain Valve automatically discharges precipitated moisture from reservoir with each operating cycle of the control device. The drain valve may be installed on main reservoir with a pump.

We are best in class automatic control valves in materials like stainless steel and cast iron. These automatic control valves are stringently tested on certain set quality parameters to assure the compliance with industrial standards.

Automatic Drain valves are used for removal of condensed water from compressed air systems. ”Mercury” range of automatic drain valves are Compact, Robust and cone in multiple sizes depending on the size of the receiver or tanks.

The selection and engagement of gears in an Automatic Transmission (AT) is hydraulically controlled depending on vehicle speed and depression of the Accelerator Pedal. The AT Control Valve is an AT component with a maze of passages through which the Automatic Transmission oil flows and is equipped with Solenoids to change the flow of oil in the passages.

Solo auto MPV can also control your reverse osmosis plant or ultra filtration plant. 4 programmable inputs and 4 outputs Available in 4 sizes - max 20 m3/hr Level controller built in Flow rate indicator cum Totalizer built in Rs 485 Communication Port Standard Operates on 100 to 250 volts Controls Dosing pumps as well as Separate backwash pump or Standby pump Manual disc assembly is provided as spare

Compact design with using highly innovative technology. Single chamber valve directly operated by the medium. Resilient seated Triple function air valve. Venting function:-   @ Large orifice to release high volume of air during starting-up pumping systems.   @ Large orifice to release high volume of air during closing-down pumping systems.   @Small orifice to release low volume of air during operation under full inner press.   Very high discharge capacity up to sonic velocity due to stabilized floater and have safe operation under high volume.   Test connection and purge connection at the air venting nozzle.   No non-ferrous metals & Fluidic guided floater. Tamper Proof and helps in reducing NRW. Bothside Epoxy Powder Coating as per GSK Standards Thickness > 250 μm.           COLOUR - ROYAL BLUE

Polyethylene air valve for waste-water applications. With extended internal parts to protect the functional parts from soiling. The corrosion- and incrustation-free plastic body allows easy maintenance and handling due to its low weight. Suitable for use in waste-water applications, in power plants and in industry.

Steam straps are automatic valves, which drain condensate from steam lines. They do not allow condensate to linger in the steam line, which can cause damage to further equipments. They do not leak the energy i.e. steam. Drained condensate has energy in it, so can be reused for other process, so saving energy losses. Steam straps are essential in varius industries such as huge refineries, chemical complexes, steel mills, paper mills, textiles plants food processing unit, hospitals & so many others wherever steam is utilized. There are types of steam traps. One of them is Thermodynamic Steam Trap. It has only one moving part, the Disc. They are actuated by principle of Thermodynamic & Fluid Mechanics. Kinetic energy from the steam & heat energy from the condensate is employed to open & close valve disc. Mostly advantageous for light condensate loads.

Automatic control valves, It is a highly engineered Automatic Control Valve knowledgeably designed to operate off line pressure or if desired, from an independent power source. Actrol valves are hydraulically operated, diaphragm actuated for multi-function control of non corrosive, non abrasive fluids.

Pneumatic automatic ball valves with all accessories are available both in floating and trunnion mounted design from class 150 to class 600 pressure ratings. Metal seated ball valves and multiport ball valves are also available with actuators. Fire safe ball valves are available in automated version.

INTRODUCTION AIPL Super Efficient Automatic Drain Valve For Condensate Removal. In Compressed Air Systems, Moisture is an Unavoidable Critical Element which is absorbed from the atmospheric air. The acumulation of moisture will be very very large. The compressed air along with water causes costly- Damage within few minutes to Pneumatic Equipments / Tools To reduce the maintenance cost in the Pneumatic controls systems "AIPL" has developed and "AIPL AUTOMATIC DRAIN VALVE" based on solid state Electronic Adjustable Timer. APPLICATION AREAS OF AUTOMATIC CONDENSATE DRAIN VALVES Anywhere - Everywhere Compressed Air is being used in Industries, for Moisture Condenstate Removal Automatically regularly to improve life of Pneumatic equipments.   Efficient Precise Economical Where to be used? AIPL Automatic drains for condenstate removal.   Filters, Separators, After Cooler, Receiver Tanks, Air Dryers, Pneumatic Tools - Controls Equipments & any other Pneumatic Equipment Machine systems. You need an Automatic Drainage System Condensate Removal regularly without human error to save energy - power. SPECIFICATIONS AIPL Electronic Condensate Drain Valve.   1/8" Pilot air operated - High discharge type with Large discharge port and on line type. Complete range of Automatic Condensate Drain Valve - Precise & Economical.   Cycle Time : 1 to 45 / 90 Min. (Adjustable). Valve open time : 3.5 - 4 seconds. Supply Voltage : 220 V ± 15 % (or as per your requirements). Power Consumption Temp. : 6 Watts. Max. Ambient Temp. : 75° C. Max. Fluid Temp. : 70° C.   Maximum Discharge Per Cycle   1/2" Outlet Pilot operated - 400 ml. 1" Outlet Pilot operated - 1550 ml (with build in SS Stainer). Max. Test pressure : 16 kg/cm2 - up - 10 kg/cm2 Min. Pilot Pressure : 2.5 Kg/cm2. Valve Housing - Aluminium. Seals - Nitrile.   Timers Body - ABS Rust Proof   Solenoid Coil - Encapsulated. Power Reduction - By Transformer (Circuit - Thermo Sealed). Control Unit - Rotatable 360°. Internal Parts - SS / Brass Rust Proof.  

PART NO (3.0 mm) :- 06 024 000 00 PART NO (6.5 mm) :- 06 027 000 00 Maximum Working Pressure :- 500 bar, (for 3 min), 225 bar (for 6.5 mm) Outlet hole size :- 3.0 mm, 6.5 mm Switching air inlet pressure :- Up to 6 abr (Double acting) Inlet/Circulation ports :- 1/4" BSP(F) for 3 min, 3/8" BSP(F)for 6.5 mm Outlet port :- 3/8" BSP(F) Swivel Wetted parts :- 304 Stainless steel, Tungsten Carbide Valve, PTFE