Concrete Testing Equipment Dealers

We are the leading suppliers of Concrete Testing equipments such as CTM,UTM etc,we also supply cube moulds,slump cone etc and all types of concrete testing equipment.

Veekay Industries is a reliable Vertical Capping Set Manufacturer, Exporter and Supplier, located in New Delhi, India. Our Vertical Capping Set is used for capping compression cylinder specimens. The Vertical Capping Set is required both in the laboratory and in the field. The specimens capped in this Vertical Capping Set have plane parallel faces. Specifications The Vertical Capping Set consists of a base with an upright, which serves as a guide for positioning the capping plate and cylinder. The 19mm thick capping plate is machined accurately. There is a recess in the plate for keeping the molten capping compound and to position cylinder. Our Vertical Capping Set is complete with cylinder carrier and ladle. Reference Standard : IS : 516 1959, BS 1881-120 for cylinders 150mm diameter x 300mm long

The design of concrete mix is aimed at maximum durability for the conditions where it is to be used. Ability to resist the flow of water through is one of the important durability characteristics. The permeability is determined on cement mortar and concrete specimens, either cast in the laboratory or obtained by cutting out cores from existing structures. The Permeability test is carried out as per the standard, IS:3085 and US Bureau of Reclamation, specifications. High Pressure Permeability Test can be conducted on different size specimens using different cells. Each cell is made of steel and provided with a top plate and funnel at the bottom having gasket seals held in position through bolts and nuts. The concrete specimens are sealed in the cell to prevent any leakage along the side walls. The permeated water is collected in glass bottles attached at the bottom. Each test stall has its own control system, operating pressure gauges and valves. The pressure sight glass tubes are fully protected by a shatter proof panel The multi-unit per-meameters are so designed that all tests can be performed at the same time, using either the same head or varying head pressure, as each test stall is provided with its own pressure regulator and control. The control instruments are mounted on a sturdy welded structural stand. All multi-units are provided with end pressure gauges. Each unit is provided with chamber pressure gauges of 0-20 kg/cm2 and test pressure gauges of 0-15 kg/cm2. Pressures are applied using any available pressure line at the site or a compressor. Concrete Permeability Tester for specimen 100mm dia x 100mm height with 3 cells Concrete Permeability Tester for specimen 100mm dia x 100mm height with 1 cell Concrete Permeability Tester for specimen 150mm dia x 150mm height with 3 cells Concrete Permeability Tester for specimen 150mm dia x 150mm height with 1 cell Concrete Permeability Tester for specimen 300mm dia x 300mm height with 3 cells Concrete Permeability Tester for specimen 300mm dia x 300mm height with 1 cell

Ultrasonic Pulse velocity test on concrete can be conducted by ULTRASONIC PULSE VELOCITY TESTER. We are manufacturers and suppliers of UPV TESTERS , ULTRASONIC FLAW DEFECTORS. Shop UPV Testing machine online at

It is used for determining the workability of concrete . Consist of slump cone 20cm bottom dia. & 10cm top dia. With handle, base plate & tamping rod 16mm dia. & 60cm long.

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.Applications• Non destructive strength measurement of in situ or precast concrete.• Crack & Void detection.• Determination of Homogeneity of concrete.• Elastic property measurement of concrete.• Infrastructure Checking.• Construction Testing.• For Research Purpose.• For Students Practical(Civil/Mechanical Engineering Colleges).• To Test Wood,Rocks and similar materials using suitable probes.• To Check Railway Path.• Old Building Strength Check.Features• Compliant with International Standard BS-4408 (Part V – 1974) and ASTM C-597.• Light weight, easy to operate.• Range up to 5 meters using suitable probe.• Fast, Reliable results.• Computer compatible.Additional features for 4600M • LCD display.• Direct velocity measurement.• RS-232 output.• Memory for calibration & measurement data.• Curve fitting for mechanical parameters Vs Velocity Correlation. Additional features for 4600G • Large Graphic LCD display.• Bidirectional data transfer with PC.• Elastic Mode for elastic constant measurement with special probes.• All other features of 4600 M.