Critical Heat Flux Apparatus Dealers (30 products available)

Product Code: EKE 2311The apparatus demonstrates the regimes of pool boiling. The test section consists of a test wire surrounded by water of constant temperature. The surface temperature of the test wire is heated by passing current through it. Due to the temperature difference between the wire surface and surroundings, the difference regimes are observed till the burnout point.0 Specifications Test wire -35 gauge or 40 gauges. Length = 10cm. Nichrome heater- 1 kw capacity - 1 nos. Glass trough of sufficient capacity. Table light to observe the test wire. Voltmeter and ammeter to measure the input to the test wire. Dimmerstat to adjust the voltage. A technical manual accompanies the unit.Services Required: 220v, ISA, stabilized single-phase supply. Floor surface- 1m x 1m at working height.

Range of Experiments to be Carried Out• To determine the critical heat flux at different bath temperatures• To plot the graph of Critical Heat Flux with rescpective Bath Temperature

Customers should not worry about the security of their payments with us as we follow secured Online and Offline Payment Processing. We are a name synonymous to trust and quality, thus we make every attempt to bring forth only finest product range that is manufactured using premium quality range of products.

• Driven Type: Electric
• Shell: 150 mm.

The apparatus consists of a. m. s. shell, in which copper tubes are fitted. The baffle in the end box makes the tubes arrangement two-pass type. The cold fluid, i.e. air enters the shell and flows over the tubes. Hot fluid is hot water, which is obtained from a geyser and flows through the tubes. 25% cut baffles are provided in the path of air. Measuring tank measures water flows rate while an orifice with water manometer measure air flow. Thermometers measure the inlet and outlet temperatures of the fluids. The unit enables students to determine the heat transfer rate, heat transfer co-efficient, LMTD, and effectiveness of heat exchanger, in laminar as well as turbulent flow of air.

We are listed among the most genuine and reliable Manufacturers, Exporters and Suppliers of Critical Heat Flux Apparatus. The offered Critical Heat Flux Apparatus is fabricated using high grade and excellent raw material, sourced from renowned vendors in the industry. We stringently examine the Critical Heat Flux Apparatus on various quality parameters, only after the approval of experts we deliver the same to the customers.

• Weight: 10-20kg, 30-40kg
• Voltage: 110V, 220V
• Condition: New
• Power: 0-100W, 100-200W, 200-400W
• Driven Type: Electric
• Temperature Range: 0-5 Deg C, 10-20 Deg C, 5-10 Deg C
• Warranty: 5yrs
• Ambient: 0-180 Deg C 180-360 Deg C

The nichrome wire is heated by passing current through it. Input to nichrome wire is controlled by a dimmer stat. As one goes on increasing wire input current increases and at critical heat flux the wire brakes, which is measured on the meter. A magnifying glass & a lamp is provided to visualize natural convection and pool boiling also. A separate heater coil in water allows experiment to be conducted at various water temperatures. SPECIFICATIONS1) Glass bowl housing water, test heater and water heater.2) Dimmer stat to control input to test wire.3) Voltmeter & Ammeter to measure input to test wire.4) Thermometer to measure water temperature.5) Magnifying glass & lamp for visualization of boiling process.A technical manual accompanies the unit.The unit provided with an attractive colour powder coated.

The ‘J P T I’ unit consists of a cylindrical glass container containing distilled water. Heating surface is in the form of a Nichrome heating wire completely submerged in the water. Thermometers are provided to measure the temperature of water in the container. Pool boiling phenomenon can be studied at atmospheric pressure. • Ideal for group studies & demonstration for boiling regions up to critical heat flux conditions. • A range of experiments can be performed with varying degree of sub cooling

The ‘J P T I’ unit consists of a cylindrical glass container containing distilled water. Heating surface is in the form of a Nichrome heating wire completely submerged in the water. Thermometer is provided to measure the temperature of water in the container, variac is provided to supply electrical input to the test heating wire.

The apparatus consists housing the test heater and heater coil for initial heating of water. This heating coil is directly connected to mains (Heater) and the Test Heater (Nichrome Wire) is connected also to mains via a dimmer stat and a voltmeter, to read the voltage. A micro controller based peak detector has been provided to measure the maximum current during the process. The heater wire can be viewed through a transparent window.

• Model: HTL0019

Critical Heat Flux Apparatus works as a demonstrative tool to present the method of pool boiling. Our flux apparatus has a test wire enclosed by water of persistent temperature. The surface temperature of the test wire is heated by passing current through it. Due to the temperature different temperatures in the surface and atmosphere, the difference in system are observed till it burns out.

We are offering critical heat flux apparatus. Range of experiments: two successive regions of pool boiling phenomenon namely. 1. Natural convection boiling and accompanies the 2. Nucleate boiling. Can be visualized up to the critical heat flux point which is attained by slowly increasing the input to heater by the dimmerstat. At the critical heat flux point, the wire melts indicating maximum heat flux position. Vend I can be recorded at critical heat flux point.

The ‘J P T I’ unit consists of a cylindrical glass container containing distilled water. Heating surface is in the form of a Nichrome heating wire completely submerged in the water. Thermometers are provided to measure the temperature of water in the container. SPECIFICATION:- • Glass Container - Dia. 250mm & Height 100mm • Voltmeter - 0 - 300 V • Ammeter - 0 - 5 A • Dimmerstat - 10 amp • Heater (For water Heating) - Nichrome Type. • Length of the Test Heater wire - 100mm • Thermometer - 0 - 100 0C   FEATURES:- • Pool boiling phenomenon can be studied at atmospheric pressure. • Ideal for group studies & demonstration for boiling regions up to critical heat flux conditions. • A range of experiments can be performed with varying degree of sub cooling. SERVICE REQUIRED:- • Suitable bench area to mount the instrument. • 15 amps, Single Phase A.C. supply with earthing connection

The apparatus consists of a nichrome wire immersed in water. The Nichrome wire is heated by passing current through it. Input to the nichrome wire is controlled by dimmer stat. As one goes on increasing wire input current, at critical heat flux, the wire brakes which is measured on meter. We can visulise natural convection and pool boiling. A separate bulk heater is provided to conduct experiment at various temperatures.Glass trough placed on a tripod housing water, test & bulk heater.

Critical heat flux apparatus Heat Transfer through composite walls, Thermal conductivity apparatus (Two Slab Guarded Hot plate method).

• Digital Voltmeter: 0 - 199.9 Volts.
• Digital Ammeter: 0 - 19.9 Amp.

The apparatus consists of a nichrome wire immersed in water. The Nichrome wire is heated by passing current through it. Input to the nichrome wire is controlled by dimmer stat. As one goes on increasing wire input current, at critical heat flux, the wire brakes which is measured on meter. We can visulise natural convection and pool boiling. A separate bulk heater is provided to conduct experiment at various temperatures. Specifications: Glass trough placed on a tripod housing water, test & bulk heater. Thermometer to measure water temperature.   Instrumentation & Controls : Digital Voltmeter - 0 - 199.9 Volts. Digital Ammeter - 0 - 19.9 Amp. Heater Control . Necessary switches and Fuses.   Service Required : 230 V.A.C. stabilized supply with earthing. Floor space - 1.5m X 1.5 m approx.  

• Features: Superb functioning, Rust resistance, High efficiency

CRITICAL HEAT FLUX APPARATUS, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

Critical Heat Flux Apparatus MICROTECH apparatus consists of a nichrome wire immersed in water. The nichrome wire is heated by passing current through it. Input to nichrome wire is controlled by a dimmer stat. As one goes on increasing wire input current increases and at critical heat flux the wire brakes, which is measured on the meter. A magnifying glass & a lamp is provided to visualize natural convection and pool boiling also.

4 stroke single cylinder slow speed diesel engine test rig

Floating Carriage Diameter Micrometer, Cover Slips, Camera Lucida

Heat Apparatus, Laboratory Forceps, Laboratory Models, cylindrical vessel

• Brand Name: TAGLab

We are offering critical heat flux apparatus. Pool boiling phenomenon is studied at atmospheric pressure two successive regions of pool boiling phenomenon namely; natural convection boiling & nucleate boiling.

Mechanical Engineering Lab Equipment, Journal Bearing Apparatus

Scrap Bucket, Slag Pot Transfer Car, Tubular Recuperator

subsonic wind tunnel, toxicity test apparatus, Polishing Lapping Machine

Metacentric Height Apparatus, Forced Convection Apparatus, Pin Fin Apparatus

Oil Hydraulic Trainer, Universal Governor Apparatus

Rope Brake Dynamometer, Plate Type Heat Exchanger Apparatus

Single Cylinder Diesel Engine, Slow Speed Diesel Engine