Magnetic Switches Dealers

We are leading dealer and distributor of Reed switches in Noida, Greater Noida and Ghaziabad. A dry-reed switch assembly contains ferromagnetic contact blades, hermetically sealed in a glass envelope which is filled with an inert gas. The switch is operated by an externally generated magnetic field, either from a coil or permanent magnet. Automotive parts: doors, sun roof, liuid level and position sensing, etc. Security for doors, windows, detection of smoke Toys: electronic board games, LEGO sensors, bicycle speedometers Industrial applications: pressure gauges, flow meters, key-knob switches Domestic appliances: coffee machines, humidifiers, water and detergent sensing in washing machines and dish washers Electronics: Notebook computers, cellular phones, copiers, etc.   Features Long life Contacts isolated from the environment Superior glass-to-metal seal Ambient operating temperature -55 to +125°C Low operating power Plated or sputtered ruthenium on diffused gold for very low and stable contact resistance Better than 1012open resistance Low cost compared with other magnetic devices UL recognition for most types Send Enquiry »  

This is the perimeter protection for the premises. The magnetic contact is usually installed in exterior opening doors and windows that are reachable from the ground (or from another part of a building which is accessible from the ground - such as a garage). The contacts operate on the principle that when the door or window moves more that 12" from the frame, the magnetic field on the switch is removed and this breaks the alarm circuit (or zone) which trips off the system. Once tripped, the alarm signal cannot be stopped by just closing the door or window. Magnetic contacts are popular and widely used because they detect an intruder before he enters the protected premises. A disadvantage is that the contact can be compromised if the intruder enters without opening the door or window, by breaking the glass.

The Top Mounted Magnetic Level Switch is listed among the best available Level Switches in the market because of the special one or multi-level indication and controlling of fluid or liquid level in the tank or vessels. Equipped with an advanced Reed Switch, our Top Mounted Magnetic Level Switch has been very useful in different pumping applications. This level switch works upon the principle of magnetic flux coupling. Features : Apt for fluid having Specific Gravity Above 0.7Can operate in any Position from vertical to an inclined angle of 30oCan manage distance of 75 mm between 2 Level set Points Main Components : Vertical Guide Pipe (Stem)Reed SwitchesMagnetic Float Sliding over the Stem Construction Features : Maximum 4 Set points in a Single Level SwitchMaximum stem length will be 3 Meters. Specifications FloatS.S.316 or Teflon Coated or PP / PVDFProcess Connection Screwed OR flangedFlange Mini 1 NB to Any Size in C.S. or S.S.304 or S.S.316 or S.S. Lined C.S. EtcSwitchHermetically Sealed Magnetically Operated Reed Switch with RhodiumContact SPST / SPDT.Rating 0.5 Amp @ 240 V ACSwitch HousingDie Cast Aluminium, Weather Proof IP 65 (Enclosure) (IS 2147) OROperating Pressure10 Kg / Cm2Operating TempMaxi. 1000 C.Cable Entry½"NPT (F) OR ¾" ET (F)No of SwitchesAs Per Customer equirementStem LengthUp to 5 Meters

RS Components stocks a quality range of reed switches, which are perfect for electrical installation work. We also offer accessories such as reed switch magnets.

We are instrumental in manufacturing, trading and supplying a broad variety of Rees S/W in Ahmedabad, Gujarat, India. We are presenting all-inclusive range of Reed Switches that are extremely utilized in varied industrial applications. These are highly recommended by our esteemed clients of all over India for its features like dimensional accuracy, high strength, long lasting life, etc. Buyers can avail them in different sizes and dimensions, so as to match their expectations. Thus, we are recognized as one of the top-notch Manufacturers, Exporters and Suppliers of Reed Switches from IndiaFeatures of Reed Control Switch-* Tough and tensile* Easily installation* Easy and convenient installation* Safe to use* ReasonableApplications of Elevator Reed Switch* Level measuring of hazardous material* Continuous' and 'point measuring' of the fluids

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. This switch can carry up to 1.2A.

DWM 1000_DWM 2000 DWM 1000_DWM 2000 The DWM 1000 electromagnetic flow switch and the DWM 2000 electromagnetic flow meter monitor the flow of electrically conductive liquids, pastes and slurries.

We are offering side mounted magnetic level switch. Buoyant force of the liquid on the float is used for movement of the perm anent magnet closer to or further away from reed switch and initiates the switching function of high and low level. The unique feature of reed switch technique is adopted. Product technique, concept, merit, quality and unparallel reliability are the underlying reasons for enviable performance record. Level switches with micro switch and air break type switch is also available.

The 'reed' contact of the switch changes when operating magnet passes-by within the sensing range of the switch. The magnetic pickup will generate signal when geared wheel rotates. These switches require a magnet for there operation. The magnet is supplied with the switch. The reed element which is sealed in the switch operates when the magnet passes nearby

We are offering magnetic float level switch. Magnetic float level switches are used for point level detection of liquid in all types of vessels. it is suitable for corrosive chemicals, food industry, lubricating systems for machine tools, printing & packing & spm’s. it operation is without external power. The float switch is designed to provide long, trouble free service. It is provided high repeatability, minimizing the effects of shock, vibration & pressure. Two types of level switches are available. Top mounted vertically guided and side mounted. Float of top mounted switch moves directly with the liquid surface, actuates a hermetically sealed switch within the stem. In side mounted the switch assembly is out of the tank. various float material are available depending on the application and media whose level is to be sensed. Standard is ss. Other floats like pp, pu are available.