Multifunction Calibrators Dealers

The ATEX and IECEx certified MC5-IS is designed for use in potentially explosive environments, such as offshore platforms, oil refineries, chemical and petrochemical plants where inflammable gases may be present. There is probably no other intrinsically safe calibrator that can outperform the MC5-IS in terms of functionality. The MC5-IS is a documenting, multifunction calibrator that has calibration capabilities for pressure, temperature, electrical and frequency signals. Its modular design allows configuration based on your specific needs. Safe and robust field calibrator: The ATEX and IECEx certified, IP65-rated MC5-IS is robust and made for tough use with impact protectors and membrane keyboard. Accuracy guaranteed: MC5-IS is a high accuracy all-in-one calibrator. The calibrator is delivered with a traceable, accredited calibration certificate. Communication with calibration software: Using the MC5-IS together with calibration software provides you with a complete documenting calibration system that produces calibration certificates automatically. Unmatched functionality: No other intrinsically safe calibrator can outperform the MC5-IS in terms of functionality. Features Internal pressure modules External pressure modules RTD measurement simulation Resistance measurement simulation TC measurement simulation Current measurement generation Voltage measurement generation Low voltage measurement generation Frequency measurement generation Pulse counting generation Switch testing

Overload and short circuit protection,Pure Sine wave with variable frequency,Setting by Multi turn potentiometers for VA in 4½ digit MFC,Frequency setting by potentiometer,Parameter and range selection by inbuilt micro controller based unit and relays. Bar of LEDs to indicate parameter and range,Separate output ports for V (Hi), mA (Hi), 10A(Hi) and com,Multi Function Calibrator is useful for calibration of Digital Multi meters, Clamp on Meters, Digital Panel Meters and Analog Panel Meters, It is basically a variable source with different ranges of DC Voltage, AC Voltage, DC Current, and AC Current. It has been designed to cover the calibration of maximum ranges of variety of models of Multimeters available in the market

19 FUNCTIONS 59 RANGESKM-CAL-905MULTIFUNCTION PROCESS CALIBRATOR ACCESSORIES :Test leads, Fuse, User’s Manual, Carrying Case. OPTIONAL ACCESSORIES :Pressure modules SKU: KMCAL905Category: CalibratorsTags: calibration instruments, instrument calibrator, km cal 905,Kusam meco calibrators, MULTIFUNCTION PROCESS CALIBRATOR

Owing to our vast manufacturing facilities, we are able to offer Multi Function Calibrator. The MFT 4010 is a break-through combination calibrator / HART communicator that truly reduces the time spent on field calibrations. Our offered MFT 4010 Series deliver the versatility of a calibrator and the convenience of HART communications in one hand-held unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured by the NIST traceable MFT. The available modules include differential, gauge, vacuum and absolute pressure as well as temperature and voltage/current. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled and trimmed using HART communications. Device Specific commands for supported devices are included with the MFT. MFT 4010 Advantages: All-in-one tool Takes the place of multiple hand held instruments,simplifies workload and improves productivity Automation for HART field devices Calibration is automated through auto setup of the calibrator based on the device settings, digital trims automate the device adjustment steps Calibration types supported Pressure, t/c, RTD, I/P, P/I, switch, loop and mA/V for conventional HART transmitter or local indicators Document as found and as left calibration results Create calibration procedures on the hand held or download them from compatible device management software. Save results to non-volatile memory Field updates Uses internet downloads to update and add capability /HART support Modules Select from a variety of positive-lock measurement modules for excellent versatility Field recertification Sensor modules and integral V/I can be recalibrated for zero, span and linearity via the MFT User interface 2.1” x 2.1” display, four soft keys (definitions change with mode requirements) and eight hard keys provide user interface. Display is configurable for 1 to 4 simultaneous measurements. User convenience Auto shut off, damping, min/max value capture, display hold, sensor zero, direct contrast adjustment Security lockout Lockout specific MFT settings or all at one time Diagnostics MFT 4010 self-tests upon power up and upon installation of sensor modules advisories are posted on the display Dedicated DOF memory Memory for 500 HART device drivers Measurement units Customary English and metric system units are selectable   Click on image to enlarge  

4 - 20mA (1KΩ Load, 24V Loop Supply) with1mA Resolution 0 -100.00mV, 0-1.0000V, 0-12.000V K, J, E & T Thermocouples (°C and °F) Frequency : 1-62500 Hz DC Current Basic Accuracy : 0.025% Easy Key Pad Number Operation Easy Step and Auto Ramp Functions 0-20mA & 0-24mA Selectable 0-100% Output (mA, mV, V) Beeper Warning when Output is Open (mA) or Short (mV,V )

The Fluke 725Ex intrinsically safe multifunction process calibrator meets ATEX II 1G EEx ia IIB 171 °C KEMA 04ATEX 1303X safety standard and I.S. Class I, Division 1 Groups B-D, 171 °C compliance. It's rugged and reliable for field use and has a simple, push-button user interface and can store frequently-used test setups for later use.The Fluke 725Ex multifunction process calibrator can be used to measure volts dc, mA, RTDs, thermocouples, frequency and ohms.   Features: Voltage Range / Resolution / Accuracy 0 to 100 mV / 0.01 mV / .02% rdg + 2 LSD 0 to 10 V (source) / 0.01 V / .02% rdg + 2 LSD 0 to 30 V (measure) / 0.01 V / .02% rdg + 2 LSD mA Range / Resolution / Accuracy 0 to 24 mA / 0.001 / .02% Rdg + 2 LSD mV (TC terminals) Range / Resolution / Accuracy -10.00 to 75.00 mV / .01 mV / .025% of range + 1 LSD Resistance Range / Resolution / Accuracy 15 to 3200Ω / 0.01 to 0.1Ω / 0.1 to 1.0Ω Frequency Range / Resolution / Accuracy 2.0 to 1000.0 CPM / 0.1 CPM / ±.05% 1 to 1000 Hz / 1 Hz / ±.05% 1.0 to 10.0 kHz / 0.1 kHz / ±.25% Measure/source pressure using Fluke 700PEx Pressure Modules

Compact, Light Weight Unit with Holster • Capability to Measure & Simulate DC Voltages, DC Current, Frequency, Resistance, Thermocouples & RTDs • 5 digits display of Measurement & 6 digits display for Simulation • Dual LCD with white LED for backlight • Measurement & Simulation of : DC Voltages : 50 mV & 500 mV & 5 V in Measurement Mode 100 mV, 1V & 10V in Simulation Mode DC Current : 50 mA in Measurement Mode; 20 mA in Simulation Mode Resistance : 500 Ω & 5 KΩ in Measurement Mode; 400 Ω, 4 KΩ & 40 KΩ in Simulation Mode Thermocouples : R, S, B, E, K, J, T & N

Presenting Multifunction Calibrators that are of top quality. We are one of the best known and trusted manufacturers, exporters and suppliers of Multifunction Calibrator all over the country. The Multifunction Calibrators manufactured by us are made from superior grade material. Our Multifunction Calibrators serve maximum efficiency, longer equipment life and users safety. These calibrators are available with us at reasonable market prices.

Multifunction Process calibrator source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available models 11,14,15 Series Adopt ITS 90 Temperature Scale Used 6 digit LCD display with backlight Good accuracy 0.02 %, Battery Power operated RTC for Thermocouple Calibration 4 X1.5 VDC Alkaline Battery for long life

We are offering universal multifunction process calibrator. Universal multifunction calibrators are used for the simultaneaous simulation and measuring of programmable test points. thermometers, signals for thermocouple, rtd's, resistance, ma, mv, voltage, frequency is available in this multifunction calibrator.

FEATURES:4-20mA (1KΩ load, 24V Loop Supply)0-100.00mV, 0-1.000V, 0-12.000VK, J, E, T Thermocouple (° C and ° F)Frequency 1-62500 Hz0.025% Basic AccuracyEasy Keypad OperationEasy Step and Auto Ramp Functions0-20mA, 0-24mA selectable0-100% Input (mA, mV, V)Beeper warning when output is open (mA) or short (mV, V)

the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and IP tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.

We manufacture and supply Multifunction Process Calibrators. These handheld devices are battery operated and ideally designed for measurement of electrical and physical parameters. It is an all-in-one instrument that can serve as multimeter, thermocouple, and can also be used to measure volts, current, pressure, frequency, etc. It features a wide display screen that clearly shows all the readings. Rugged and compact body makes it perfect for demanding conditions.

Universal Multifunction Calibrators are used for the simultaneaous simulation and measuring of programmable test points. Thermometers, Signals for thermocouple, RTD's, Resistance, mA, mV, Voltage, Frequency is available in this Multifunction Calibrator.