Right Angle Boot Dealers (25 products available)

Bus Bar Insulation Heat Shrinkable Tubing are medium and heavy wall heat shrinkable tubing for protection and insulation of bus bar against accidents caused by electrified bare bus bar.Features/Benefits: Reduce bus bar clearance requirements Give designers more freedom in designing switchgear cabinets when space premium Protects against short circuit and electrical leakage caused small animals Protects against short circuit and electrical leakage caused small animals Projects against corrosion, dirt and other contaminants that may cause accidental flashover Available in continuous length roll form for conventional and economical installation Technical specifications: Protects against accidental flashover up to 72.5kV Voltage Class 1kV-72.5kV Ideal for high and low voltage bus bar insulation Halogen Free(Optional) Flame Resistant with Oxygen index higher than 27 (optional) Applications: Bus Bar Insulation and protection In switchgear cabinets where space is limited and air spacing between bus bars need to be kept at minimal

• Dielectric Strength: 10 kV/mm (min.)
• Cold Temperature: Flex (-400 C)

Shaped components to meet a variety of configuration requriements, Designed for medium voltage applications up to 36 KV, Continuous operation temperature: -55° C to 120° C, Used in proctecting cable and up to 36 KV against flashover or surges induce during working life in switch gear in and transformer boxes.

For the utmost customer satisfaction, we are flexible in delivering the product range at the place agreed by the customers and that too in the set time. As a quality-conscious firm, we make sure that the offered lot is sternly packed using the best quality packaging material. However, we source the packaging material from the genuine vendors.

• Tensile Strength: 12 N/mm2 (MPA)(min.)

Angleboots are Heat Shrink Right Angle Straight Boots provide insulation to the bushings in the cable termination box, where the clearance between phase to phase and phase to earth is less then the normal air clearance. These boots provide protection against flashover in the event of high humidity, rodent menace and surge impulse.The boots are mode from high quality cross linked non tracking polyolefin material. They are internally coated with water resistant red mastic.

• Length: 145.0

This data sheet covers the requirements for heat shrink medium voltage boots whose dimensions will shrink to predetermined size upon the application of heat above 125 deg. C. Color of the MV boots is reddish brown. The MV boots are electrically insulating, anti-tracking, UV resistant, weather proof and flame retardant. Both ends of MV boots are internally coated with red mastic and covered with release paper. The MV Right Angle Boots provide insulation and sealing for bushings in cable-end boxes integral with switch-gear and transformers. The mastic sealant provides a water-tight environmental seal to the bushing. The MV boots are also supplied as a part of heat shrink cable termination up to 36 kV for operation in air-filled cable-end boxes, designed with reduced clearances for compound filling. The boots are designed to withstand surges induced during the operational life of the termination.

• Voltage: 24 kV

Raychem elastomeric insulating boots are moulded parts, which fit over the connection between the cable lug and the inline or right angled equipment bushing to improve phase-to-phase and phase to- ground insulation. They are used in switchgear and transformer cable boxes where the air clearances are insufficient for normal operation, or to protect against flashover due to rodents or high humidity. R-CAB, SILCAB and E-CAB are different bushing boots available for maximum system voltage levels upto 24 kV. Raychem's SILCAB-T is designed to be "re-usable terminal protector" with facilities for on line testing.

• Feature: Cold Applied, Easy Installation, Re-usable
• Brand Name: BRENT
• Country of Origin: Made in India
• Material: Rubber
• Thickness: 2 Mm
• Color: GRAY
• Size: 22 KV
• Item Code: TPB
• Number of Layers: 1

Provided by us, is Heat Shrinkable Right Angle Boot that is used for providing insulation to the cable termination box (bushings). The Heat Shrinkable Right Angle Boot that we present is made using polyolefin material that is non tracking and possess a red mastic water resistant coating. Protects Against Flashover During Rodent menaceHigh humiditySurge impulse

we are offering a premium quality range of Heat Shrinkable Right Angle Boot. Heat shrinkable right angle boots are made from high quality non tracking cross linked polyolefin material ensuring high quality standards. We are offering heat shrinkable right angle boots at market leading prices. feature of heat shrinkable right angle boots these are internally coated with water resistant red masticprovides protection against flashover in the event of high humidity, rodent menace and surge impulseprovides insulation to the bushings in the cable termination box, where the clearance between phase to phase and phase to earth is less than the normal air clearance

• Property: Tensile Strength , Elongation
• Requirements: 8N/mm2 (min.) , 200% (min)
• Test Method: ASTM D412, ESI 09-13 , ASTM D412, ESI 09-13

Designed for medium voltage applications up to 36 KV Shaped components to meet a variety of configuration requriements Continuous operation temperature: -55° C to 120° C Used in proctecting cable and up to 36 KV against flashover or surges induce during working life in switch gear in and transformer boxes.

• Material: PTMT
• Color: Green,Black,White
• Brand: Watertec
• I Deal In: New Only
• Valve Control: Handle Controlled
• Valve Type: Angle Valve

Features Designed for medium voltage applications up to 36 KV Shaped components to meet a variety of configuration requriements Continuous operation temperature: -55° C to 120° C Used in proctecting cable and up to 36 KV against flashover or surges induce during working life in switch gear in and transformer boxes.

• Color: Red
• Material: PVC
• Finish: Polished
• Packaging Type: Box
• Rustproof: Yes

right angle boot, Insulation Mortar, insulation products

right angle boot, Bajaj Three Wheeler Spare Parts

right angle boot, Cable Jointing Kits, Plastic Molding Job Work

right angle boot, Light Construction Equipment, Lighting Products

Heat Shrinkable Right Angle Boot, Heat Shrinkable End-Cap

In-Line and Right Angle Boots

Heat Shrinkable Right Angle Boot, Heat Shrinkable Two