Rust Converter Dealers

“rust seal” is a high tech formula converts rust into a protective coating that’s ready to go as a blue-black primer and prevents future rusting in to one easy step. treated surfaces can be painted over with most top coats. “rust seal” is an industrial strength product for all your household, automotive and industrial rust problems. Application areas recommended for use on rusted iron & steels include :- *fencing and gates, pipelines, storage & fuel tanks. Farm equipments. Structural steel and overhead concrete repair work. *mail boxes, trailers. Garden tools, iron furniture & railings. *ramps, panels, utility trailers. Vehicle frames. *shipping containers, ferries, boat trailers, deck railing bridges. *transmission towers, roadside lamp post. Advantages * easy to apply. * 3 in 1 produc- – stops rust turns it to bluish black primer and prevents future rusting. * ready to use, no phosphoric and no other harmful acids. * eco-friendly alternative to sand blasting. * non-corrosive and non flammable. Directions for use *remove all the loose particles of rust, dirt, grease, oil …… *shake and stir well before using. *apply rust seal on the metal surfaces by brush. (pour only enough for the job and don’t return leftover to the container) *for best results, apply 2 thin coats. Allow 24 hour cure time before painting over with a finish coat. *avoid if possible application in direct sunshine. *clean up the hands, brush with soap and water. *use of goggles, gloves are recommended. Coverage : 120 sq.ft lit approximately packing : 500 ml, 1 lit, 520 lits. In plastic containers.

RECOMMENDED FOR: ? Pharma & Food industry? ? Automobile Industry, Locomotives and Railways? ? Shipping Industry, Steel plants, Industrial Fabrications, ? ? Chemical Plants and Structures, ? ? Fertiliser Industry, Soap & Detergent Industry? ? Metal Fabricators, Building RCC structures, ? ? Petroleum and Petro - Chemical plants, ? ? Port & Docks, Bridges & Dams. PERFORMANCE SALVAGE RUST consists of two aspects. ? ? In the first aspect, on application of the product to the surface of iron the rust is converted into an organo - metallic complex and passivated.? ? In the second aspect an elastomeric Co-polymer with cross linking compounds form a film which is impermeable to air and moisture. These two aspects stop the process of rusting of iron by converting and protecting. ? ? Depending upon the degree of rusting of the iron surface, on application of the product, the product gives rise to black, grey or brown film. Iron lower hydroxide gives black film, iron higher hydroxide gives grey film and Iron higher oxide gives brown film. APPLY AS FOLLOWS ? Remove as far as possible the flaky and loose rust, old paint by the use a wire brush. The loose particles on the surface are then removed by the air wash or water wash.. Grease and oil are removed by a detergent wash followed by a water wash. Do not remove all traces of rust since it can be converted. ? Transfer a small portion of Rust converter in a non-metallic container. After use do not pour back the unused portion to the original container, this will prevent contamination of the product. ? Anagha Rust Convertor is an under coat and accepts all types of Top Coats like enamel, epoxy, polyurethane, polyester etc. *Permanent lasting after application EDGE OVER INTERNATIONAL PRODUCTS:- ? Has a neutral pH value of 7. ? ? Shelf life of 3 years in packed condition. ? ? Thixotropic. (No Stirring required). ? ? Use natural anti – oxidants which are eco – friendly. ? ? Certifications available regarding its product performance, non-toxicity, hence, its authenticity. ? SALVAGE RUST passes a per IS 13515 Salt Spray Test : 3% NACL spray test in a salt fog corrosion testing chamber for 30 days. No rusting observed. Immersion Test : Treated part immersed in distilled water for 30 days , no rusting observed. Acid Leach Test : PH of solution is 4.7, OK Temperature Resistance Test : 80 C for 60 minutes, OK Scratch Test : above 1000 gms, OK Adhesion Test : Passes the test.

Rostop is a new generation protective coating, which converts existing rust on metallic surfaces into a chemically inert coating, which prevents further rust and provides a suitable base for painting immediately. Rustop is a neutral solution of active chemical ingredients incorporating mineral acids, solvents, stabilizers and additives. It saves expensive and time consuming scrapping of tenacious rust by sand blasting etc. rustop can be used on rusted as well as clean metal surfaces. Due to the formation of inert coating, further rusting is totally stopped. it reacts with the loose and adherent rust on the metal surface and converts the rust into a very inert and adherent organo-metallic coating.

Rust converter manufactured using fine grade raw materials and modern technology. The excellent performance of the Rust Converter PaintPrimer has attracted various industrial sectors to place bulk and repeated orders. Moreover, potential buyers are eased with the availability of Rust Converter at market leading prices.

Neutracoat Rust Converter is a powerful oxidation converter designed for use on various steels, iron, cast iron and copper, metals & aluminum. Neutracoat Rust Converter is a aqueous solution designed to convert rust and oxidation safely and economically. The biggest advantage is that the components do not get rusty again after removing from solution which is case in Acidic Rust removers and forms black inactive layer on the metal surface which can then be painted for longer life .

CVC RUSTKOTE-300 is a new generation protective coating, which converts existing rust on metallic surfaces into a chemically inert coating, which prevents further rust and provides a suitable base for painting immediately. RUSTKOTE-300 is a neutral solution of active chemical ingredients incorporating mineral acids, solvents, stabilizers and additives. It saves expensive and time consuming scrapping of tenacious rust by sand blasting etc. RUSTKOTE-300 can be used on rusted as well as clean metal surfaces. Due to the formation of inert coating, further rusting is totally stopped. It reacts with the loose and adherent rust on the metal surface and converts the rust into a very inert and adherent organo-metallic coating.

specially designed for conversion of heavy rust in to an inert protective coating, which also promotes further adhesion to subsequent coats. It penetrates deep inside heavy scale of rust and prevents future rust formation and oxidation. This changes the chemical nature of the rust, converting it into an inert bluishN black. It forms a tough and durable polymer based barrier thin film.This is a water-based solution, so easy for application. It should be mainly used on heavily rusted M.S. areas, but loosely adhered rust particle should be removed properly. This product is mainly useful in coastal areas, chemical industries, pipeline coatings etc.

RUSTEX is a rust inhibiting coating which converts rusted metal overnight into a rust retarding, paintable surface. When applied to rusted surfaces, iron oxide (rust) is chemically changed to iron phosphate, an inert, hard substance that turns the metal black. This increases the paint adhesion and durability of the coating.Rust Preventive Prepares rusted metal for painting Water-based; biodegradable. For more information , visit a parent website of Rust-Oleum or Truworth Homes.

Rust Converter The distinctive formula of this product accounts for its dual functionality. Rust Converter 177 is a single pack ready-to-use solution which on applying converts the existing steel rust into a stable metal complex by forming a polymeric film over it. The Polymeric film acts as a protective and passivative coating preventing further corrosion which in turn acts as an ideal base for painting.

Rust Converter, Glass, Paint Removers, Rust Preventives, Rust Remover