Redwop Chemicals Pvt. Ltd. Ring Road, Rajkot, Gujarat

APPLICATION PROCEDURE Mixing the contents of both the base and hardener have to be thoroughly stirred to disperse any settlement which may occur during storage. The entire contents of the hardener have to be mixed into the base and mix mechanically.   ADVANTAGES Combats corrosion Permanent protection to the steel structures Excellent adhesion to steel Time Saving-touch dry after 15 to 20 Minutes Exhibits excellent bond strength in cementatious repair.

Brand Name : Redwop

APPLICATION AREA On internal and external wall plaster Bricks wall APPLICATION PROCEDURE Combine WOLFEX and glue as per requirement than colour with tints as per your demand of colors. Slowly add water to WOLFEX, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg WOLFEX. Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats. ADVANTAGES Provides a tenacious bond to difficult substrates such as dense glass and other glass boards Fast drying Environment friendly Anti-chalking Increased flexibility for application schedule Easy application Water-based, contains no hazardous or flammable solvents Less odor having no noxious fumes

Brand Name : Redwop

Color : White

State : Fluid

Packaging Size : 1, 2, 5, 10 & 20 Kg. Pack

APPLICATION AREA Ceilings RCC surfaces Repair works Smoothing of walls for both indoor and outdoor Renders a smooth and durable surface Under layer for all kinds of decorative paints APPLICATION PROCEDURE Add 3 part of WHITPLAST SF to 1 part of water in suitable container and blend it properly with electric blender to get lump free paste then apply on prepared substrate with the help of putty trowel. ADVANTAGES Water-resistant Excellent adhesion to host substrate Smooth finish No Blistering & Chalking Provides stain free surface Good breathability

Brand Name : Redwop

Color : White

State : Powder

Packaging Size : 1, 5, 20 & 40 Kg Pack

APPLICATION AREA Smoothing of walls for both indoor and outdoor Renders a smooth and durable surface Under layer for all kinds of decorative paints APPLICATION PROCEDURE Add 3 part of WHITPLAST RF to 1 part of water in suitable container and blend it properly with electric blender to get lump free paste then apply on prepared substrate with the help of putty trowel. ADVANTAGES Reduces paint consumption Resistance to peeling No flaking No Blistering No Chalking Provides stain free surface Good breathability

Brand : Redwop

Form : Powder

Color : White

We offer high-quality Polyurethane Waterproof Coatings in cans or buckets for waterproofing surfaces like roofs. Our matte finish coatings provide long-lasting durability. With varying coverage based on product concentration, our waterproof coatings are ideal for manufacturers and exporters looking for reliable waterproofing solutions.

Type : Waterproof Coatings

Material : Polyurethane

Packaging Type : Cans Or Buckets

We offer a premium white wall tile adhesive in a convenient bucket packaging of 5 Kg. Our polymer-based adhesive is designed for fixing wall tiles with ease and precision. Ideal for manufacturers and exporters, this high-quality adhesive ensures strong adhesion and long-lasting results. Upgrade your tiling projects with our reliable and efficient wall tile adhesive.

Color : White

Packaging Type : Bucket

Application : For Fixing Wall Tiles

APPLICATION AREA Tunnels & culverts, Hydroelectric power plants, Sewage treatment plants, Roof joints, Basements, Water retaining structures, Joints between rigid and flexible surfaces, Around iron, steel and cement pipes, ventilated facades and window installations Large areas of concrete such as pavements, runways & bridge decks; also for vertical or sloping surfaces as on towers, chimneys, canal linings, columns & beams, where water curing is difficult or unreliable APPLICATION PROCEDURE W-EXPON sheet tension-free and in a way that movement of the connected building parts can be accommodated without damaging the membrane. Press the membrane sheet on the adhesive by a plastic roller. ADVANTAGES Highly flexible waterproofing and vapor control system Fast, easy and secure application even in corners Membrane pre-treatment free Suitable for uneven substrates (blowholes in concrete), leveling of substrate by adhesive Durable bond and barrier/seal Ozone- and UV-resistant Minimizes risk of drying shrinkage, cracks and dusty surfaces Non-toxic and nonflammable

Brand Name : Redwop

Material : EPDM

Color : Off White

Tensile Strength : 4 Mpa

We offer a high-quality cement-based Tile Adhesive in a sleek Grey color, packaged in a convenient Plastic Bucket. Ideal for both indoor and outdoor tile installations, this adhesive boasts a quick 24-hour drying time and excellent water resistance. Each 20 Kg bucket provides coverage of approximately 5-7 sq. ft. per Kg, making it a cost-effective choice for your tiling projects. Trust our Manufacturer and Exporter expertise to deliver top-notch tile adhesives that meet your needs with ease.

Type : Tile Adhesive

Material : Cement-based

Color : Grey

Packaging Type : Plastic Bucket

Application : Indoor And Outdoor Tile Installations

Drying Time : 24 Hours

Water Resistance : Yes

APPLICATION AREA Bituminous road marking Kerbs stones Speed humps Airplane tracks Children play yards Parking areas APPLICATION PROCEDURE Place THERMO MARK 30M powder in road marking machine after heating it to 150°C to 200°C & place on the prepared surface ADVANTAGES Easy in application only site mixing water is needed Fast cure with excellent durability High bond strength Unique chemical composition enables this mortar to be more compact, thinner and stronger.

Brand Name : Redwop

Packaging Type : 25 Kg Bag

TERATILE T-BOND is a highly polymer modified, cementitious adhesive, that can be used in slurry form, on wet screed, for wet-on-wet fixing of tiles and stones, as well as an adhesive paste for fixing tiles and stones on floor and wall.   Advantages Pre-wetting of tiles not required and hence less prone to cracking of mortar. User friendly application. Good adjustability time and high water retention even at elevated temperature. Excellent adhesion on smooth surfaces. Develops high adhesive bond strength.   Uses On-site mix additive to be mixed with cement, for fixing of tiles. To get good workability. To get sufficient sag resistance as well as appropriate setting time. To make cement self-cured. Tile fixing on all types of low and high rise building

TERATILE SINEX tile adhesive, is suitable for fixing at 3-6mm bed thickness (can be extended up to 15mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Porcelain tile Vitrified tile Ceramic tile Low porous stones Interior floor and wall Applicable of tiles size 250mmX400mm, 300mmX300mm, 300mmX400mm, 300mmX600mm, 300mmX900mm, 600X1200mm Sand stone, khatu, Lapato, Lime stones, Granite & marbles in internal application

Type : Tile Adhesive

Advantages Non-shrink and waterproof Submerged conditions and internal application Workable with open wet time of 20 minutes at temp. 30° Good slip resistance High adhesive bond strength Early strength gain   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile over cement based mosaic tile, stone   Uses Porcelain tile, Vitrified tile, Ceramic tile & medium porous stones etc. Use in damp and totally submerged conditions Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm Sand stones , mint stones in internal application Internal applications

TERATILE PROLIX cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.    Advantages Very High Polymer modified Very High performance and strength Excellent Water & frost resistance Excellent tensile & shear adhesion   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc. Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, 600X1200mm, 1000X1000mm Domestic and Industrial Application External and internal application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application

Packaging Type : 20 kg

Type : Tile Adhesive

TERATILE PROLIX EXTRA is a cementitious powder available for fixing of vitrified tiles for floor & wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Very High Polymer modified Very High performance and strength Excellent Water & frost resistance Excellent tensile & shear adhesion   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc. Domestic and Industrial Application Applicable of tiles size 250mmX400mm, 300mX300mm, 300mmX400mm, 300mmX600mm 300mmX900mm, 600X1200mm, 1000mm X1000mm, 1200x2400mm. External and internal application External and internal application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application

APPLICATION AREA Wall, floor Indoor and outdoor tiles / stones joints APPLICATION PROCEDURE Mix powder and water in approx. W/C= 0.3 properly than apply directly on prepared joints with the help of trowel and after 30 minutes remove the extra surplus with the help of sponge. Mix 200 ml of POLY GROUT admixture to increase strength and durability of tile joints. ADVANTAGES Satin free attractive joints Easy in maintenance and highly durable with chemical & temperature resistance properties High joint bond strength

Color : 24 Shades Available

Material : Polymer

Brand Name : Redwop

Packaging : 500 Gm, 1, 5 & 20 Kg Pack

Coverage : Visit Our Website

TERATILE PLATINUM cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.    Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note: Mix 50% polymix for engineered stones  For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.   Uses Tile claddings Porcelain tile Vitrified tile Low porous stones Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm @internal] Sand stone, khatu, Lapato, Quartz *, Lime stones, Granite, Elevation stone, Rajasthan black stone & Marbles in internal application

Type : Tile Adhesive

Packaging Type : 20kg Bag

Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings Porcelain tile Vitrified tile Low porous stones Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm@internal] Domestic and Industrial Application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite & marbles in internal application

Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Ceramic external application, Vitrified internal application, Porcelain & porous stones Permanent fixing of tiles over smooth surfaces For specialized applications such as tile on tile and tile-on-glass etc. Applicable of tiles size 250mmX400mm,300mX3400mm,300mmX600mm,300mmX900mm 300mmX300mm

Type : Polymer Based Tile Adhesive

Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note : *For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.   Uses Porcelain tile Vitrified tile Ceramic tile Low porous stones Interior floor and wall applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm,600X1200mm Sand stone, Lapato, Lime stones, Granite & marbles in internal application

TERATILE DIAMOND cementitious powder available for fixing of ceramic and vitrified tiles for floor &wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note : *Mix 50% polymix for engineered stones   Uses Tile claddings Porcelain tile Vitrified tile Mosaic tiles Low porous stones Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm300mmX900mm, 600X1200mm, 1000mm X1000mm Sand stone, khatu, Lapato, Quartz*, Lime stones, Granite, Mint stone & marbles in internal application

Packaging Type : 20kg Bag

Type : Tile Adhesive

Advantages Non-shrink and waterproof Submerged conditions and internal application Long time workable Good slipresistance High adhesive bond strength Early strength gain   Substrate : RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Porcelain tile, Ceramic tile & high porous stone etc. Use in damp and totally submerged conditions Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm Sand stones , mint stones in internal application Internal applications

Type : Tile Adhesive

APPLICATION AREA To seal construction joints Pipe, steel and pile cap penetrations through walls and base slabs ADVANTAGES Swells in contact with water Resistant against water and various chemical sub-stances Different types and dimensions available

APPLICATION AREA Building Roofs / Terraces- Flat & Slope RCC Structure, Masonry Walls of all types low & high rise buildings Cooling Tower & Bridges APPLICATION PROCEDURE Shake well before use and directly apply using Brush/ roller on prepared surface. ADVANTAGES Provides higher dry film thickness of minimum 1 mm in three coat application & Good Crack capacity Can be used for flat as well as sloping roofs It is Breathable UV resistance with excellent waterproofing capacity Nontoxic and ecofriendly as it is lead free

Packaging Type : 1,5,10,20 Lit. Bucket

Form : Liquid

Color : White

Material : Reinforced Acrylic

Brand Name : Redwop