solder bars
1,200 - 2,900 Per Kilogram
300.00 Kilogram (MOQ)
Vigson Solder Bar SAC07
Get Price Quote
100 Kilogram (MOQ)
Composition Sn Cu In Ag Sb Bi Zn Fe Al As Cd 99.3±0.1 0.7±0.1 < 0.01 < 0.0001 < 0.02 < 0.01 < 0.005 < 0.02 < 0.02 < 0.03 < 0.002 The Sn99.3Cu0.7 lead free solder bar is made up of 99.7% tin and 0.7% copper. It is desirable for use in common metal equipment, copper tubes, and copper plates. This product is a conventional type of environmentally-friendly solder by adoption of lead-free soldering technology. As a typical type of high-temperature lead free tin bar, our Sn99.3Cu0.7 lead free solder has the melting point of approximately 227 degrees Celsius. It is suitable for both wave soldering and dip soldering processes, which call for environmental protection. During the soldering process, this product features nice liquidity. It can substantially reduce various technical problems, such as bridging, icicle, solder spatter, and more. Features: Eutectic alloy. Bridge-free and icicle-free soldering. Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate. Good through-hole penetration. Good topside fillet formation. Dross rate equal or lower than tin-lead solder. Does not require a nitrogen atmosphere. Does not erode copper from holes, pads and tracks. Low rate of copper leaching makes it easy to control the copper content of the solder bath. Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys. Thermal fatigue resistance and creep strength better than tin-lead. Slow, even growth of the intermetallic layer at the solder/substrate interface. Also performs well in selective and dip soldering.Applications: Dip soldering or Wave soldering of electronic components such as PCBA, THT Soldering of metals, such as copper roofing joinery Assembly of stained glass, silver jewelry etc Other generally tinning purpose.
Best Deals from Soldering Bars
Tin Solder Bars
200 - 1,500 Per Kilogram
Solder Bar
Get Price Quote
5 Kilogram (MOQ)
Tin Lead Solder Bars
1,650 Per Kilogram
Solder Bar
700 - 2,600 Per Kilogram
10 Kilogram (MOQ)
All grade solder bars available
Solder Bar
Get Price Quote
Our organization has observed impressive rise as Solder Bar supplier, courtesy our ability to fulfill to wholesale demands without hassle. Maintaining the set industrial standards, we make sure that the range is as per the requirements.
Tin Solder Bar
Get Price Quote
Tin Solder Bar can be availed from us in the required percentage. Our Tin Solder Bar is precisely manufactured by a special process that controls the inclusions of oxides and metallic and non-metallic impurities. It is used where lower surface tension and hole filling ability are essential. The Tin Solder Bar finds wide usage in electronics industries for numerous high tech electronic applications. It is widely appreciated for its supreme quality, high durability and flawless finish.
solder bars
Get Price Quote
Bar solder typically has a melting point range of 90 to 450 degree Celsius (190 to 840 degree Fahrenheit),and is commonly used in electronics, plumbing, and sheet metal work. Manual soldering uses a soldering iron or soldering gun.
Tin Solder Bars
Get Price Quote
Our company is a specialized Manufacturer and Supplier of Tin Solder Bars from Haryana, India. The Solder Bars are also known as soft solders, which are widely used in the form of alloy along with lead. A eutectic mixture of tin is prepared along with lead to form this range of Tin Solder Bar. The bars are ideal for application in communication, radio, instruments, meters and copper, tin, iron, etc. Our Tin Solder Bars are recognized for their quality, consistency, and reliability. We provide them in different sizes, and colors.
Lead Free Solder Bars
2,200 - 4,500 Per kg
30 kg (MOQ)
Tin Lead Soldering Bar
1,900 Per Kilogram
50 Kilogram (MOQ)
solder bars
Get Price Quote
Solder Bar
1,000 Per Piece
10 Kilogram (MOQ)
solder bars
Get Price Quote
A broadly useful weld utilized as a part of the fastening of ferrous based compounds. This compound offers palatable imperiousness to rust properties and is typically utilized where warm necessities are unstable. Our welds bars are most elevated quality review for printed circuit board industry. Extraordinary throwing systems utilizing water chilled controlled gadget give uncommonly perfect, oxide free and homogeneous weld combination. Accessible PB Free Bars and Anodes with various Composition against arrange. Sizes • Extruded sticks can be supplied in 4mm to 12mm Dia• Casted Sticks are in Trapezoidal shape x 350mm Composition • (Tin/ Silver), (Tin/ Copper), (Tin/ Silver/ Copper)
Solder Bar
2,200 Per Kilogram
20 Kilogram (MOQ)
Solder Bar
Get Price Quote
Soldering Bars
Get Price Quote
We have marked a distinct and dynamic position in the market by providing a high-quality array of Soldering Bars. Our offered bars are availed in a variety of sizes, dimensions and other such specifications to choose from. Used for wave, fountain, and dip soldering application, offered bars are precisely designed at our highly advanced manufacturing unit using the finest quality raw materials following industry defined guidelines. The offered bars can be availed from us at the industry leading prices.
Solder Bar
Get Price Quote
Solder bar is processed from virgin metal in a proprietary method that removes contaminates and reduces dissolved oxides to a minimum. The result of this is a lower drossing rate, as well as a decrease of defects for board such as bridging, icycling, non wetting .The bar is compatible with all type of no clean, water soluble and rosin electronic grade liquid fluxes.
Solder Bar
Get Price Quote
PAI SnPb40 Sticks are being formulated with High Virgin Raw Metals Processed in state-of-the-art Vaccualloy Technology that brings world class Quality along. Here, Oxygen interaction with Alloy is Nil and thus, Dross formulation is reduced at PCB Assembly Process. Also an increase flow rate & reduced impurities found. PAI SnPb40 Alloy is compatible for a typical range of Flux Application Formulas used in Electronics Industry Today.
Solder Bar
Get Price Quote
Soldering Bars
2,900 Per Piece
100 Piece (MOQ)
Solder Bar
Get Price Quote
To keep pace with rapid technological development in the electronic and electrical field Bhavani Metals manufactures Rosin Core solder Wire, ROHS Compliance Solder, Lead free solder, Solder Alloys, Silver Solder, Solder Paste and solder sticks with high grade pure virgin metals. Rigid analytical quality control procedure being exercised on every cast. Highly skilled technicians and engineers specialized in the field, properly check the quality and reliability of the rosin core solder wire, lead free solder & solder alloys to meet relevant standards.
Solder Bar
Get Price Quote
Alpha Cookson is a leading manufacturer; exporter and supplier of world-class, trusted and widely used solder bar sticks for wave soldering, Pot Dip Soldering, Hot Air Level soldering. Cookson range of solder bar includes both leaded (Tin-Lead) and Lead-Free solder alloys. Alpha manufacturers these products with the highest performance for wave and dip soldering process. All Cookson products are manufactured to ISO 12224-1 specification and test methods.
solder bars
Get Price Quote
BIC offers variety of solder Bars/Sticks. ‘BIC’ solder bars is Manufactured in such a way that it eliminates all possible contaminations. As a result, a high quality alloy is formed with less dross formation. Tin-lead solder Bars Lead Free Solder Bars Alluminium Solder Bars Ultra Pure Solder Bars
Solder Bars / Sticks
Get Price Quote
We offer solder sticks and solder bars: when selecting a solder alloy the following should be considered: • electrical characteristic • soldering temperature • purity • fluidity • mechanical strength and finally economy the best combination of above properties are found in maruti solder bar. The following types of solder alloys are used in the electronic industry: • sn-pb solder • high melting solder. • low melting solder • silver bearing solder etc. The quality of maruti solder bar is best in comparison to the other solder bars available in the market. Maruti solder bar is made with extrusion process which confirms a uniform alloy composition resulting in consistent and reliable joints. The manufacturing process is such that it eliminates the contamination of metallic oxides and virtually drives out all sulphides, non-metallic inclusion and other possible contaminations.
solder bars
Get Price Quote
Solder Bar
Get Price Quote
We are offering khosla 63 37 solder bar. Khosla� super deluxe quality 63/37 sn / pb solder bar are manufactured from high quality virgin raw materials i.e. 99.995 % pure lead and further processed in such a way that end product ensure low dross, low oxide, great fluidity and high productivity in terms of soldering area. Our sticks also ensure good quality of surface after soldering. These soldering bar are manufactured by method of advanced casting having good finish, no inherent oxides, low grain size & have high aesthetical value. tin : 63 % Ⱡ0.5 % lead: remainder other impurities : max. copper : 0.08 % arsenic : 0.03% iron: 0.02% zinc: 0.003% cadmium : 0.002% aluminium : 0.001% indium : 0.05% silver: 0.10% min bismuth : 0.10% min. advantage of using khosla 63/37 solder sticks * low oxides in metal. Ensure low dross, low oxide, great fluidity and high productivity * excellent surface finish. Ensure good quality of surface after soldering * high aesthetical value. * due to fine grain structures melting occurs is a minimum temperature reducedthe stress on components.
Solder Bar
Get Price Quote
It has an adjustable holder for the soldering iron. Adjust the holder to your working style. The holderensures accident free operation while working with hot parts of the soldering iron. Power saving with automatic sleep and shut off options when soldering iron is placed in the holder.It has a lock-type sleeve assembly for soldering irons which enables quick change of the composite tips.It has a control key card which enables locking at a temperature setting.It has an alarm which warns when the solder joints reach low temperatures.
