Warning Devices Dealers (30 products available)

  • Electrostatic Alarm

    Electrostatic Alarm

    Get Price Quote

    The  Electrostatic Alarm Z201 is a portable, battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity. It is designed to provide a quick and convenient method of locating static charges and their approximate charge levels. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby.The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handling static sensitive devices. The instrument incorporates a unique self-resetting feature and therefore requires no manual adjustments or zeroing. It can be kept 'ON' for continuous monitoring of critical static-safe areas, thanks to its remarkably low current drain of only 1 ma.THEORY OF OPERATIONA static charge on any object produces an electric field whose strength is an inverse function of the distance from the charge. A given magnitude of charge always produces a given field strength at a given distance.The unique sensor of the instrument actually responds to this electric field. However, more specifically, it senses only changes in the electric field, so to detect a charge there should be relative motion between the instrument and the charged body.

    more..
  • Ias Addressable Audible Warning Devices

    Ias Addressable Audible Warning Devices

    Get Price Quote

    We are offer IAS addressable audible warning devices form a co-ordinated range of high quality, high performance products. Designed for use with the ZX series intelligent multi protocol fire alarm control panels, these products feature unique styling, protected electronics, simple tone selection and high efficiency. These products are suitable for most installations. The MI-LABS detector base sounder is particulary suited to hotel bedrooms, allowing the detector and sounder to be installed at the same point. The MI-LABS sounder may also be used as a wall mounted sounder with an optional cover plate. The sounders have been designed to simplify installation and include terminals for both in and out going cables and an earth termination for cable screens. The electronic components in the sounders are protected by a cover to prevent damage during installation. All models are supplied with full instructions Features: Loop powered High sound output Low current consumption 5 tones available Deep or sealed back boxes (wall sounders only) Three volume settings as standard Available in red or white Sounders designed to meet EN54 Part 3 Rotary DECADE address switches (01-99)

    more..
  • Best Deals from Warning Devices

  • Alarm Warning Devices

    Alarm Warning Devices

    Get Price Quote

    • Voltage: 12 V to 72 V
    • Brand: Crutis
    • Audio Output: 82 dB and 107 dB
    • Temperature Rang: -40 to +77 Degree C.
    • Converters: DC/DC converters.
    more..
  • Proximity Warning Device

    Proximity Warning Device

    Get Price Quote

    1 Piece(s) (MOQ)

    Proximity Warning Device finds extensive usage in large machines such as mining haul trucks have big blind spots. It improves site safety by enhancing operator’s awareness. Proximity Warning Device detects both stationary and moving objects. It can withstand vibrations, high pressure of water during washing, rain, fog, mud, dust and during night. The Proximity Warning Device that we offer gives three types of warning signals such as audible, visual, distance display. We make available Proximity Warning Device in different ranges such as 5, 8,10,15,25 meters.

    more..
  • audio visual warning devices

    audio visual warning devices

    Get Price Quote

    Myport offers a wide selection of audio-visual warning devices including sirens, bells, airhorns, sounders, beacons and a comprehensive range of audio-visual combination units.Our sounder beacons and combination units consist of an audible sounder and visual indicator in one unit providing a dual function warning device. Our range of sounder beacons and audio-visual signals for safe areas includes Asserta units, Nexus Xenon beacons, rotating beacons, electronic beacons and yodalights. We also supply explosion proof and intrinsically safe combination units suitable for use in hazardous areas as well as marine approved products.

    more..
  • Accident Alert Device

    Accident Alert Device

    Get Price Quote

    We are counted amidst the reputed Suppliers of Accident Alert Device. The Accident Alert Device that we provide promises a complete professional and hassle-free operation. Accident Alert Device, supplied by us, is one of its kinds and ensures complete safety of your vehicle. We make Accident Alert Device available at competitive prices.

    more..
  • Personal Alert Safety Systerm

    Personal Alert Safety Systerm

    Get Price Quote

    • Color: Black
    • Brand Name: MSA
    • Battery Type: Cell
    • Operating Temperature: Ambient
    • Usage/Application: Personal Alert Safety System
    more..
  • Call Alert Device

    Call Alert Device

    Get Price Quote

    1 Piece(s) (MOQ)

    We are offering call alert device. isms-01 is innovative product which supports the industry standard protocol to gather the information from the existing control system and sends sms alerts based on the configuration settings. Isms-01 supports industry standard modbus tcp/ip and modbus rtu (rs485) protocol. Isms-01 can operate in two modes: (i) monitor mode and (ii) trigger mode. Monitor mode in this mode i-sms can monitor different tag parameters as per the configurations. If the tag value exceeds certain threshold values then the module will trigger the preconfigured sms message to the respective users. Trigger mode in this mode isms-01 will not read any tags or other systems information. Isms-01 will act as modbus slave device and will provide sms service to the control network.

    more..
  • warning devices

    warning devices

    Get Price Quote

    We provide a loud audible alarm and a high intensity flashing strobe light for each zone. This alerts the personnel of any intrusion that occurs in that zone. The Strobe light is used to show the status of a fence after an alarm condition offering a visual alarm event memory

    more..
  • Lube Line Alert

    Lube Line Alert

    Get Price Quote

    • Weight: 0.6 lbs
    • UL & CSA Electrical Ratings: Single Pole, Single Throw magnetically operated switch 115 VAC, 60Hz, 10 watt 28 VDC, 0.5 amp Resistive 28 VDC, 0.5 amp Inductive  
    • Max Switch Rating: 350 VAC/VDC, 50 watt, 2 amp
    • Max Operation Pressure: 10,000 psi
    • Min Pressure Drop Access Alert: 150 psi
    • Flow Rate: 0.006 cu.in. to 190 cu.in. per minute @ 100 SUS 0.006 cu.in. to 75 cu.in. per minute @ 2000 SUS
    • Fluid Viscosity: 100 to 9000 SUS

    Vertex Lube-Line Alert is an easily installed device providing positive protection for compressors, pumps, engines and equipment employing any make or type of force feed lubrication system. Installed as close to each point of lubrication as possible, the unit acts as a sentinel to indicate flow or no-flow at any point in the system ahead of the Lube-Line Alert inlet. One Lube-Line Alert per pumping unit will warm of flow stoppage for any reason including low reservoir lubricant level; shaft rotation stoppage; broken lubricant lines; dirt under pump valves and worn plungers. A single Lube-Line Alert per Lubricator will warn of low reservoir lubricant level or shaft rotation stoppage. For complete protection, there should be as many Lube-Line Alert units in your installation as there are points of lubrication. Vertex Lube-Line alert provides low-cost, dependable protection for costly machinery. Features:  Indicates flow or No-Flow at any point in the system ahead of the lube-line alert inlet. Not affected by discharge pressure. Operates under continuous or intermittent low-flow rates. Universal use – operates in any air free force feed lubrication system – any make lubricator. Sensitive to a wide range of flow: from .006 cubic inches to 190 cubic inches per minute. Many type lubricants and viscosities – mineral or synthetic. Time delay adjustment – to compensate for viscosity and / or flow rate. Quick and easy to adjust. Pressures - for operation up to 10,000 psi. Explosion-proof – UL and CSA Listed for class I Groups C & D and Class II Groups E, F & G. Division 1 & 2 when installed as per NEC 501 For connection to any electrical warning system – lights, sound devices, machinery shut-off relays, telephones etc. A low-level and shaft rotation indicator – equip one pumping unit per reservoir with lube-line alert.

    more..
  • Oxy Failure Warning Device

    Oxy Failure Warning Device

    Get Price Quote

    FEATURES • Oxy Failure Warning Device ( OFWD )• Oxygen driven N2O supply• Higher efficiency forged regulators & yokes with SS fittings.• Higher precision pressure relief cum non return valve• Rotameter unit 9”• Vaporizers Goldman Halothane• Change over mechanism with oxygen flush ( Open & Close Circuit)• Oxygen & nitrous oxide gas inlet port each 2 nos.• Standard Magills circuit, All rubber antistatic tested.• Trolley made of M S Multi Colour Powder coated finish, Stainless steel tableTop tray , Modified monitoring accessories tray.• 5” dia antistatic breaking castor wheel .• Oxygen outlet for driving ventilator( Double)• Higher visibility & clarity Large diameter ( 63mm) O2 & N2Ogauge each two nos.• 10 liter W/C cylinder carrier facility• Provision for Tec Vaporizer, Hypoxic Guard , Circle Absorber & Ventilator, Ether Unit.(Optional at extra cost)• Size 1520 mm X 850 mm X 700 mm ( H x W x D )

    more..
  • Close Crane Warning Device

    Close Crane Warning Device

    201,000 Per Unit

    • Power Source: 110VAC/200 to 220VAC
    • Power consumption: 3.2 VA
    • Detecting distance: 20 m
    • Hysteresis: 15% or less of detecting distance
    • Microwave: 10525 GHz
    • Antenna: Horn antenna: directive angle 30 Degree (Horizontal and vertical)
    • Response time: 50msec or less(400msec or less when returned)
    • Control output: 1C relay contact
    • Indicators: Power, operation, monitor(Normal, transmission trouble, reception trouble)
    • Sensitivity adjustment: Course adjuster: 5 steps(5dB), fine adjuster: 5dB
    • Connection: M4 screw terminal, applicable wire 3.5mm2
    • Weight: 12 KG
    more..
  • Electrostatic Alarm

    Electrostatic Alarm

    Get Price Quote

    • Power Supply: 9 V battery
    • Weight: 150 gms 50 gms
    • Detection method: Charge coupling by field interception.
    • Detection sensitivity: 100 V or more
    • Range selection: Autoranging and autoresetting
    • Indication: By audible/visual alarm
    • Dimensions in mm: Table model - 125 x 75 x 29

    The Electrostatic Alarm Z201 is a portable, battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity. It is designed to provide a quick and convenient method of locating static charges and their approximate charge levels. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby.The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handling static sensitive devices.The instrument incorporates a unique self-resetting feature and therefore requires no manual adjustments or zeroing. It can be kept 'ON' for continuous monitoring of critical static-safe areas, thanks to its remarkably low current drain of only 1 ma. THEORY OF OPERATION A static charge on an object produces an electric field whose strength is an inverse function of the distance from the charge. A given magnitude of charge always produces a given field strength at a given distance. The unique sensor of the instrument actually responds to this electric field. However, more specifically, it senses only changes in the electric field, so to detect a charge there should be relative motion between the instrument and the charged body.

    more..
  • Electrostatic Alarm

    Electrostatic Alarm

    2,473 Per Piece

    • Brand: PB Statclean
    • Weight: Approx 125 G (with Battery)
    • Dimensions: 135 x 70 x 25 mm
    • Detection method: Charge Coupling by Field Interception Detection
    • Indication: LED visual Indication with Audible Alarm
    • Power supply: 9 V Battery
    • Range: Auto Ranging and Auto Resetting
    more..
  • Message Alert Devices

    Message Alert Devices

    Get Price Quote

    We offer Message Alert Devices. Ritron Quick Talk and Quick Assist Message Alert Devices - One way alert devices based on voice or trigger devices such as door switches, temperature, motion devices.

    more..
  • audio visual warning devices

    audio visual warning devices

    Get Price Quote

    audio visual warning devices, power operated mirrors, Fire Detection System

    more..
  • audio video warning devices

    audio video warning devices

    Get Price Quote

    audio video warning devices, electronic systems, Power Modules

    more..
  • warning devices

    warning devices

    Get Price Quote

    warning devices, industrial folding doors, industrial sliding doors

    more..
  • Pre Fire Alert Devices

    Get Price Quote

    Pre Fire Alert Devices, Over Voltage Relay

    more..
  • warning devices

    Get Price Quote

    warning devices, Voice Recognition System, HID Card Reader

    more..
Filter by City
top