1800 Low Differential Pressure Switch
7,500 Per Piece
12 Piece(s) (MOQ)
1800 low differential pressure switch series 1800 low differential pressure switch for general industrial service set points from 0.07" to 85" w.c. Repetitive accuracy within 2% essential for industrial environments, the series 1800 low differential pressure switch for general industrial service combines small size and low price with 2% repeatability for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting the switch on one side of a wall or panel with adjustment easily accessible on the opposite side. Ul and csa listed, and fm approved. caution: for use only with air or compatible gases. models & ordering modeldescription 1823-0differential pressure switch, range 0.15-.5" w.c., approx. Deadband @ min. Set point 0.06, approx. Deadband @ max. Set point 0.06. 1823-00differential pressure switch, range 0.07-0.22" w.c., approx. Deadband @ min. Set point 0.05, approx. Deadband @ max. Set point 0.05. 1823-1differential pressure switch, range 0.3-1.0" w.c., approx. Deadband @ min. Set point 0.08, approx. Deadband @ max. Set point 0.08. 1823-10differential pressure switch, range 2.0-10" w.c., approx. Deadband @ min. Set point 0.18, approx. Deadband @ max. Set point 0.45. 1823-2differential pressure switch, range 0.5-2.0" w.c., approx. Deadband @ min. Set point 0.10, approx. Deadband @ max. Set point 0.12. 1823-20differential pressure switch, range 3-22" w.c., approx. Deadband @ min. Set point 0.35, approx. Deadband @ max. Set point 0.70. 1823-40differential pressure switch, range 5-44" w.c., approx. Deadband @ min. Set point 0.56, approx. Deadband @ max. Set point 1.10. 1823-5differential pressure switch, range 1.5-5.0" w.c., approx. Deadband @ min. Set point 0.14, approx. Deadband @ max. Set point 0.28. 1823-80differential pressure switch, range 9-85" w.c., approx. Deadband @ min. Set point 1.30, approx. Deadband @ max. Set point 3.0. specifications service:air and non-combustible, compatible gases. wetted materials:consult factory. temperature limits:-30 to 180°f (-34 to 82.2°c). 1823-00, -20 to 180°f (-28.9 to 82.2°c). pressure limits:10 psig (68.95 kpa) continuous, 25 psig (172.4 kpa) surge. switch type:single-pole double-throw (spdt). repeatability:±2%. electrical rating:15 a @ 120-480 vac, 60 hz. Resistive 1/8 hp @ 125 vac, 1/4 hp @ 250 vac, 60 hz. De-rate to 10 a for operation at high cycle rates. electrical connections:3 screw type, common, normally open and normally closed. process connections:1/8" female npt. mounting orientation:diaphragm in vertical position. Consult factory for other position orientations. set point adjustment:screw type inside mounting spud. weight:1 lb, 5 oz (595 g). agency approvals:ce, csa, fm, ul. Note: optional (-expl) explosion-proof enclosure does not possess any agency approvals.
Boot Level Detector Diaphragm Switch"
Get Price Quote
Jayceetech boot level switch is a diaphragm switch, designed for use with free flowing, dry granular material stored in bins, silos or hoppers. Mounted from outside of the bin. The diaphragm can be of neoprene rubber or steel depending upon the application. the diaphragm switch is used for detection of level in bucket elevator boot and can be used for detecting high, intermediate or low levels of material food grains, sand etc
Best Deals from Washing Machine Components
Copper Tubes
Get Price Quote
1 Ton (MOQ)
washing machine gear box
Get Price Quote
We source the raw material from the trusted places in the market. As a result of which, the finished products stand high on the expectations of the clients. In order to ensure zero defects at buyer's end, we make sure that we conduct stringent quality procedures.
Danfoss KPS45 Pressure Switch
3,000 Per Piece
1 Piece (MOQ)
PU Molded Sweeping Machine Filter
1,200 - 3,000 Per piece
10 Piece (MOQ)
Automatic Drain Valves
Get Price Quote
10 Piece (MOQ)
HD1F-HD2F Flow Switch
Get Price Quote
20 Piece (MOQ)
Mechanical flow switch, for fluid or gaseous media, with spring-supported piston and magnetic triggering of a reed switch. Robust construction in brass or stainless steel. Features : 0.1 - 80 l/min switching range 1/4" - 1" BSP threaded connections Brass or Stainless Version Viscosity Compensated Version (HD2F) Optional visual displays ATEX Option
Dwyer 1950-20-2F Explosion Proof Differential Pressure Switch
1 - 48,500 Per piece
4 Piece (MOQ)
Dwyer 1950-20-2F Explosion Proof Differential Pressure Switch Product Details: Minimum Order Quantity 3 Piece Brand DWYER USA Media Type Air and Non-Combustible, Compatible Gases Range Setting 4.0-20" w.c. Contact System Type Single-Pole Double-Throw (SPDT) Electrical Connection 3 Screw Types: Common, Normally Open and Normally Closed Model Name/Number Dwyer 1950-20-2F Weight 3.25 Ib (1.5 kg) 1950-02 Model: 4.4 lb (2 kg) Mounting Type Diaphragm in Vertical Position Country of Origin Made in India Dwyer 1950-20-2F Explosion Proof Differential Pressure Switch Dwyer 1950-20-2F Explosion-Proof Differential Pressure Switch (4.0-20" w.c.) Model: 1950-20-2F Combines the best features of the popular Dwyer® Series 1900 Pressure Switch with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres NEMA 7 & 9. DESCRIPTION Dwyer 1950-20-2F Explosion-proof Differential Pressure Switch, Range 4-20 Differential Pressure Switch, Range 4-20" w.c., approx. deadband @ min. set point 0.40, approx. deadband @ max. set point 0.60. Model 1950 Explosion-Proof Differential Pressure Switch combines the best Features of the popular Dwyer® Series 1900 Pressure Switch with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres NEMA 7 & 9. Raintight NEMA 3 (IP54). Weatherproof Features include a drain plug and O-ring seal in cover. Electrical connections are easily made by removing front cover. For convenience the set point adjustment screw is located on the outside of the housing. Twelve models offer set points from .03 to 20" w.c. (7.5 to 5 kPa) and from .5 to 60 psi (0.035 to 3.5 bar). The unit is very light and compact - about half the weight and bulk of other explosion-proof or weatherproof switches with separate enclosures. CAUTION: For use only with air or compatible gases. Applications with hazardous atmospheres and a single positive pressure may require special venting Dwyer 1950-20-2F Specifications Service -Air and Non-Combustible, Compatible Gases Temperature Limits -40 to 140°F (-40 to 60°C) 0 to 140°F (-17.8 to 60°C) for 1950P-8, 15, 25, and 50 -30 to 130°F (-34.4 to 54.4°C) for 1950-02 Pressure Limits-Continuous: 1950's - 45 in w.c. (0.11 bar); 1950P's - 35 psi (2.41 bar); 1950P-50 only - 70 psi (4.83 bar) Surge: 1950's - 10 psi (0.69 bar), 1950P's - 50 psi (3.45 bar), 1950P-50 only - 90 psi (6.21 bar) Enclosure Rating-NEMA 3 (IP54), NEMA 7 & 9 Switch Type-Single-Pole Double-Throw (SPDT) Electrical Rating-15 A @, 125, 250, 480 VAC, 60 Hz Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz Electrical Connections-3 Screw Types: Common, Normally Open and Normally Closed Process Connections-1/8" Female NPT Mounting Orientation-Diaphragm in Vertical Position Set Point Adjustment-Screw Type On Top of Housing Weight-3.25 Ib (1.5 kg) 1950-02 Model: 4.4 lb (2 kg) Agency Approvals-CE, CSA, FM, UL
Honeywell Wfs6000 Water Flow Switch
1,250 Per Piece
Pressure Control Switch
Get Price Quote
Pressure Control Switch is a device that controls systems against pressure drops or pressure spikes. We are well-known Importer and Supplier of Pressure Control Switch from Ahmedabad, Gujarat. We offer our customers with an assortment of quality products at affordable prices. The products supplied by us are durable and extremely reliable. We offer desirable equipments and accessories to our clients and promise them with a hassle free and timely delivery.
Orion Gas Pressure Switch
1,150 Per Piece
10 Piece (MOQ)
Rotating Paddle Level Switch
Get Price Quote
1 Piece (MOQ)
The Series RPS201 Rotating paddle level switch is manufactured to detect high / low levels of free-flowing dry solid material, such as fine coarse, powders and granules. It is mounted through the wall of a vessel such that the paddle remains above the surface inside the vessel.A small electric motor drives a paddle that rotates freely in the absence of material, but is impeded when material is present. When the rotating paddle is obstructed due to the texture of powder material, a micro-switch output activates to signal an alarm.
Danfoss, Wika Pressure Switch
1,000 - 8,000 Per Number
10 Piece (MOQ)
Pressure Switches
1,800 Per Piece
1 Piece (MOQ)
Differential Pressure Transducers
10,000 - 1,000,000 Per Piece
10 Piece (MOQ)
Differential Pressure Transmitter HART communication Two wire system Non-Intrusive magnetic Controls Range-ability 100:1 128X64 COG with backlit Rigid construction Separate electronics and connection components Application flexibility with HART communication
Air Pressure Switch
Get Price Quote
Plastic Washing Machine Stand
32 - 40 Per Piece
120 Piece (MOQ)
DANFOSS PRESSURE SWITCH
1,200 Per Piece
Drain Valve
Get Price Quote
This valve prevents the accumulation of solids or liquids in the bottom outlet of a vessel. This valve can be incorporated in any spherical or cylindrical vessel.
SMC ISE30A-01-P-LA1 Precision Digital Pressure Switch
4,850 - 5,250 Per Number
Washing Machine Hose Pipe
40 - 150 Per Piece
100 Piece (MOQ)
Videocon Washing Machine Outlet Hose Pipe
Get Price Quote
50 Piece (MOQ)
Aluminium Die Casting Washing Machine Motor Pulley
64 Per Piece
5000 Piece(s) (MOQ)
Being one of the trusted firms in the industry, we are highly engaged in providing a unique range of Washing Machine Die Casting Parts.
High Pressure Drain Valve
3,200 Per Piece
Festo Pressure Switch
Get Price Quote
Bronze Angle Feed Check Valve
Get Price Quote
We are offering bronze angle feed check valve, screwed male ends hyd. Tested 35.15 kgfcm2.
DAP Melt Pressure Transducer
Get Price Quote
The DAP Series incorporate a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. The Gneuss patented heated sensor tip allows the sensor to be easily removed from a undquot;frozenundquot; melt without any problems. The diaphragm is not damaged when the polymer contracts. The DAP has revolutionized the handling of critical medias, for example PC, PMMA or ABS. Heater with 24V Combined pressure- and temperature measurement Highly tough design with flexible components G-coating to counteract adhesive materials Patented technology Removal possible even when extrusion line is down or at ambient temperature Longlife design
Flow Switch
Get Price Quote
We are offering flow switch.
Boiler Mobrey Switch
Get Price Quote
50 Piece (MOQ)
