Washing Machine Components Dealers in Pune

ITLPro Solutions offer Pressure Transducer that converts Pressure signal to the Voltage or Current proportional signals with enhanced accuracy and reliability. It is useful for applications like HVAC (Heating, Ventilating, and Air Conditioning) Refrigeration technology, Compressor engineering, Packaging industry and general industry, Machine and plant engineering etc. It has signal conditioning for the pressure sensors - Ceramic Thick Film Sensor, LVDT (Linear Variable Differential Transformer) Sensor, Piezoresistive (Piezo) Sensor, Thin Film Sensor etc. The output is programmable with Analog: 0-10V, 4-20mA etc., Digital: Wired - RS232, RS485, Modbus, CAN, USB, Ethernet, Profibus, Field bus etc. Wireless - WiFi, Zigbee, Bluetooth, LPRs etc. Available with local and remote display interface features.  

We are one of the leading traders of Flow Indicating Switches that are energy efficient and cost effective. These MTD make Flow Indicating Switches are magnetically actuated and are specifically used for designing positive detection of fluid flow through any equipment. The suitable sizes of the switch can be selected from actual flow rate. In these switches, the flow range covered is from 1 to 150 LPM and the fluid flow in the system can be seen through transparent tube.

NO AIR LOSS FLOAT TYPE AUTO DRAIN The SFD320 is an automatic mechanical float type drain made of cast Aluminum body • That contains a stainless steel float ball • It discharges only the condensate automatically (not the compressed air). • It is also equipped with a manual drain valve for manual operation. • The drain is provided with a standard ½” BSP connection. DRAINS SANPAR TIMER DRAIN Sanpar make Timer Drain consists of a strainer with a solenoid valve. The drain valve opens based on the timings set in the drain. Also the time interval between the successive openings of the valve can be set. The drain has a standard ½” BSP connections.

Transmitters are based on film sensing element deposited on stainless steel diaphragm. Thanks to the latest state of the art SMD electronics and compact all stainless steel construction, these products are extremely robust and reliable, with SIL2 certification supplied as standard. KS transmitters are suitable for all industrial applications, specially on hydraulics (presses, pumps, power pack, fluid power, etc.) with severe conditions usually with high level of shock, vibration, and pressure and temperature peaks.    Ranges: from -1 to 1000 bar  Nominal Output Bracket: 0-10  Nominal Output Signal: 0...10Vdc (3 wires) / 4...20mA (2 wires)  Compact size  Wetted parts: Stainless steel  SIL 2 certified according to IEC/EN 62061:2005   Transmitters are based on the extensimetric thick film measuring principle. Thanks to highly stable electronic components, these transmitters can be used in applications requiring longdistance signal transmission or in smart control systems. TK pressure transmitters are designed mainly to measure pressure in oil, air, and hydraulic circuits.   They can also be used in the technical and process measurement application as well as for compressors, presses and mobile hydraulic.

Used in hazardous areas for applications like fire fighting systems, LPG bottling plants, etc. For any type of corrosive and non-corrosive gases and fluids.

The DTV-R valve can be used in applications where a discharge flow to a drain or sewer must be tempered with cold water to reduce temperature. In some areas, plumbing codes dictate a maximum allowable sewer discharge temperature. The DTV-R provides a convenient, economical, and easy to use method of tempering hot effluent flows. Since the DTV-R is open only when the effluent exceeds the specified setpoint temperature, it also conserves water by automatically turning off cold water when not needed.   Design Features * Boiler blowdown drain lines* Condensate return headers* Heat Exchanger backup cooling* Dehumidifier* Any excessively hot effluent flow to sewer/drain* Condensate discharge from steam traps directly to sewer

We are offering pressure transducer. Protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level, flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. very low-pressure transducers for ranges as low 0.25?? w.c. And feature ±1% full scale static accuracy. Primarily used in building energy management, these transducers are capable of measuring pressures and flows with the accuracy necessary for proper building pressurization and air flow control. 865 series transducers utilize an all-stainless steel micro-tig welded sensor that allows up to 10 psi overpressure (in either direction) with no damage to the unit. All sensor components have thermally matched coefficients, which promote improved temperature performance and excellent long-term stability.

Our Automatic Drain Valves are designed to remove Condensate from Compressed Air Systems. Typical installations are on Compressors (after coolers), Dryers, Receivers (Air Tanks), Driplegs and other Compressed Air System Components. Programmable Motorised Drain Valve, Model TEC-44 The TEC-44 is designed to remove high viscosity effluents / condensate at pressures upto 40Bar .The Microprocessor Controlled Motorised Ball Valve is powered by a powerful motor and an efficient gear train, and features a 10 channel programmable cycle with LCD, valve open indicator, test button, anti block system and a battery backup to protect against power failure. The TEC-44 can be programmable to open between 3 sec to almost 15 minutes and the cycle can be adjusted between 4 min and 24 hours, allowing unbelievable flexibility of operation and the 12 mm orifice, can handle huge Condensate discharge in a controlled manner. Auto Drain Valve TEC-11 : FOR COMPRESSED AIR FILTERS designed to drain condensate from all compressed air FILTERS regardless of filter capacity. The in-line design allows for fast efficient installation. The TEC-11 can be matched to any model / brand or type of filter. Auto Drain Valve JORC : EZ-1 ECONOMY DRAIN The EZ-1 is produced with a 1/4� valve connection and in 230 VAC or 115 VAC versions. The limited variations have allowed for massive production batches and subsequently a reduction in cost. The reliability factors have remained in place such as Viton seals, large orifice etc. Auto Drain Valve JORC : COMBO The COMBO is an all-in-one timer drain with an integrated ball valve and strainer The unit offers true bme savings during installation procedures. The valve is protected due to the integrated ball valve and strainer The unit can be shut off from the compressed air system enabling easy and safe maintenance work to be carried out. Auto Drain Valve JORC : OPTIMUM (High Pressure upto 400 Bar) : The Optimum has a wide range of veriations and options such as valve connection sizes in both BSP or NPT and pressure/voltage options. The �new futuristic look� allows the OPTIMUM to make its mark well into the new millennium. The OPTIMUM replaces the very familier TEC-22 range. More options are in NICHE products. Auto Drain Valve JORC : SMART GUARD Pro : Zero air loss drain Valve: The SMART GUARD Pro drain system uses state-of �the art software in combination with a special transducer interface to measure the presence of condensate, volumetrically, 50 times per second. There is no loss of compressed air; Continuous monitoring insures fast, effective discharge of condensate up to 1000 liters condensate per hour. There are no Sensors to foul up and the unit functions equally well with clear water or heavily emulsified and dirty condensate. The SMART GUARD Pro operates in a pressure range from zero to 16 bar and the large condensate removal capacity makes it suitable for all applications, regardless of size. An alarm feature is incorporated as standard. Auto Drain Valve JORC : NUFORS :The Nufors removes condensate from compressed air systems. The operation is automatic and there is no unnecessary compressed air lost during the condensate discharge cycle. The NUFORS uses pneumatic forces to operate the valve assembly and is ideally suited in applications where power is not available, too expensive or not reliable. The large orifice, combined with the large discharge capacity make this drain suitable for all compressor capacities.