Pressure Switches Dealers in Pune

Try out and switch to SUCO hex 24 – one of the most demanded pressure switches of SUCO, if you are looking for: Low-cost mechanical pressure switch to high SUCO quality standards Normally Closed or Normally Open compact switch Switching power 100VA High overpressure resistance (up to 35, 300 and 600 bar) Long working life even under harsh operating conditions Easily adjustable switching point - even during operation Various thread connections to suit your installation (request data sheet) Ready-wired variants Versions with push-on and screw terminals With gold contacts on request Zinc-plated Steel, Brass and Other body materials Integrated DIN 72585 connector (type 01200121) Technical data: Degree of protection: IP65 (IP67IP6K9K for 0120 0121), Terminals IP00 Switching frequency: 200min Temperature stability for diaphragmseal materials: NBR -30°C to +100°C EPDM -30°C to +120°C FKM -5°C to +120°C Silicone -40°C to +120°C HNBR -30°C to +120°C Mechanical life expectancy: 10^6 cycles (at pressures up to 50 bar) Maximum pressure rate: 1 barmsec Current rating (resistive): ≤ 4 A Vibration resistance: 10g 5-200 Hz sine-wave Shock resistance: 294 ms²; 14 ms half-sine-wave Type 0163 - Material Carbon Steel, Over Pressure Safe up to: 600 bar 0164 - Material Stainless Steel, Over Pressure Safe up to: 600 bar 0166 - Material Carbon Steel, Over Pressure Safe up to: 300 bar 0167 - Material Brass, Over Pressure Safe up to: 35 bar 0168 - Material Carbon Steel, Over Pressure Safe up to: 300 bar 0169 - Material Carbon Steel, Over Pressure Safe up to: 600 bar

SUCO has enhanced its product portfolio with a new series of pressure switches with fully integrated connector varieties. Until now, SUCO has already offered a membrane/piston pressure switch with an integrated bayonet connector (DIN 72585) known as type 0120/0121. This product range is now expanded with the addition of double-pole and triple-pole Deutsch-Connectors, AMP Superseal, AMP Junior Timer, Packard Metri Pack and M12 connector. SUCO also offers the counterparts to these connectors with a standardised cable length of 2 meters. The usage of these kinds of pressure switches will considerably reduce assembly time, since the connection can be activated by a simple turning movement or by fastening the components together and latching them afterwards. The basis of these “integrated pressure switches” are the million times proved mechanical pressure switch types 0166 and 0163 (for technical specifications see www.suco.de), in which the higher sealing protection of the IP 67 standard (depending on connector) can be guaranteed.

Operating Function Industrial Pressure Switch (IPS) is an electromechanical device that senses changes in pressure and provides electrical contact closures at predetermined pressure values. IPS Pressure Switch may be used to energize an alarm or may directly control the process by cycling pumps, shifting valves etc. In an alarm application, the switch protects valuable equipment by signaling an alarm. In direct control application, the switch can be linked electrically to other equipment.Applications IPS Pressure Switches are meant for use with oil, water, air, steam and other non corrosive pressure mediums. They are not designed for use with any refrigerant gases. IPS Pressure Switches are used on a wide variety of applications which include pumps, compressors, turbines, lubrication systems & condensers to name a few.

The M5200 pressure transducers from the Microfused™ line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series sets a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.25% Accuracy ±1.0% Total Error Band Compact Outline -40°C to +125°C Operating Temperature Weatherproof   APPLICATIONS Industrial Process Control and Monitoring Advanced HVAC Systems Refrigeration Systems Automotive Test Stands Off-Road Vehicles Pumps and Compressors Hydraulic/Pneumatic Systems Agriculture Equipment Energy Generation and Management  

Protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level, flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. ps82 – economical miniature vacuum switches 1. 169 to 948 mbar these miniature vacuum switches, based on our proven ps71 series, are designed for demanding applications where space and/or price are strong concerns.

BOSS Produces highly engineered product for application in the automotive sector, agricultural equipment, industry & construction equipment industry for the last 7 years. BOSS manufactures a wide range of hydraulic gear pumps, motors, Valves other hydraulic elements confirming to SAE-BIS and DIN Standards. BOSS pumps are being exports to many countries and having satisfied customer world wide. The company’s state of art manufacturing plant incorporates the largest process technologies & is designed for production flexibility. Hence, BOSS able to meet varied customers needs with range of over 200 different types of hydraulic pumps with displacements of 0.8cm3rev. to 153 cm3rev. maximum pressure of @207 bar. pumps are produced in Aluminimum. The applications include agriculture tractors, construction equipments, material handling equipment, earth moving equipment, mining, drilling equipment & road paving.

We are instrumental in providing high quality Digital Pressure Switches that are designed to provide unique engineering features and simple mechanism. The Digital Pressure Switches are highly appreciated for the qualitative features of being maintenance free and are offered as per their requirement in the industry leading price. Attributes : Unique engineering features Simple mechanismMaintenance freeEffectual performance Click Here For More Details

"V4" sealed subminiature micro switches - 20 x 6.4 x 9.2 mm