Industrial Switches Dealers in Pune

Cable float level switch X in turbulent industrial fluids and fluids with suspended agglomerates, such as sewer water.The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to the particular design of the switch element. This makes it suitable for applications where there may be wide or rapid fluctuations in ambient or fluid temperatures. Switching capacity of this new design of self-cleaning switch element is 10A at 250V ac

Pressure switches are designed to make electrical contact when a set pressure is reached. These switches can be designed to close or open on the pressure rising or falling. Many industries including automotive and diesel use these types of switches to maintain optimum system operation. Diesel Generator Bellows: We have capability to manufacture bellows for various diesel engines used in DG sets

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications.The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly. Pressure ranges: -0.2 to21 bar High contact load - Ultra short bounce-time Also available with gold plated contact systems Media: Gaseous media and air Enclosure IP44 when mounted with top cover and back plate Also available with enclosure IP55 for OEM customers Small dimensions - space saving - easy to install Shock and impact resistant. SPECIFICATION Rated Voltage / Frequency: 240v / 50HZ to 120v / 60Hz Range: 2-14bar Rated Current / Power: 17A / 3HP or 20A / 1.5HP

SUCO has enhanced its product portfolio with a new series of pressure switches with fully integrated connector varieties. Until now, SUCO has already offered a membranepiston pressure switch with an integrated bayonet connector (DIN 72585) known as type 01200121. This product range is now expanded with the addition of double-pole and triple-pole Deutsch-Connectors, AMP Superseal, AMP Junior Timer, Packard Metri Pack and M12 connector. SUCO also offers the counterparts to these connectors with a standardised cable length of 2 meters. The usage of these kinds of pressure switches will considerably reduce assembly time, since the connection can be activated by a simple turning movement or by fastening the components together and latching them afterwards. The basis of these “integrated pressure switches” are the million times proved mechanical pressure switch types 0166 and 0163 (for technical specifications see www.suco.de), in which the higher sealing protection of the IP 67 standard (depending on connector) can be guaranteed.

A hot new development from ESI Technologies, UK! Accurate pressure measurement in high temperature environments is important in many applications and can often present a challenge. With this in mind, the HI2200 – a rugged, high temperature pressure transducer, is designed to operate in demanding environments with outstanding durability and long-term stability. It is constructed from components carefully selected to operate reliably at elevated temperatures. It is available in pressure ranges from 0-1bar to 0-1500bar with un-rationalised mV output with temperature compensated options. It has titanium alloy wetted parts, a stainless steel and titanium housing. It is suitable for use at operating temperatures of up to 200°C. It can not only be used to measure high temperature media, but can also be used in applications where the ambient temperature can also reach 200°C. But the real beauty of this product is that it is equipped with state of the art silicon-on sapphire technology, which offers performance previously unobtainable or prohibitively expensive. Whether it’s specific application, design or supply expectations – solution combining the latest technology, reasonable cost and no compromise on quality, is just a call away!

We are listed amongst the most trusted manufacturer, exporter and suppliers of Conductivity Type Level Liquid Switch in Maharashtra, India. This simple and low cost point level controller is widely used for detection of conductive liquids which remains unaffected by liquid density or viscosity. This level liquid switch is suitable for interface level measurement between conductive and non-conductive liquid. This product is used in Process Industry, Sump, Reservoir, Cooling Tower, Water Treatment, and Building Automation & Filtration Systems.   Details : Simple, low cost point level controller for detection of conductive liquids, unaffected by liquid density or viscosity. Suitable for interface level measurement between conductive and non-conductive liquid. Range - 100 to 10000 mm Liquid Conductivity - ≥25 us Wtd Parts - SS304/316 Max Temp - 100oC Max Pressure - 5 Kg/cm2 Contacts - 5A, 250VAC x SPDT Enclosure - Cast Al x IP66, Ex-P IIB Applications : Process Industry, Sump, Reservoir, Cooling Tower, Water Treatment, Building Automation & Filtration Systems

Applications    • Suitable for non-sticky liquids and solids.• Suitable for side as well as top mounting.• Single point/multipoint/pump control switching on single probe.• Minimum and maximum fail safe field selectable.• Process temperature max 600 ºC  (ceramic insulation).• Process pressure max. 20 bar.• PTFE coated for corrosive and conductive liquids.     Features    • Compact size.• Universal industrial power supply  (15 to 80 VDC & 15 to 265 VAC).• Low power consumption.• Easy dip switch calibration.• Customized process connections like Threaded/Flanged/Hygienic etc.

We are offering flange mounted float switch specifications :: 1] temperature : 50 c 2] contact rating-5 va 3] switching voltagecurrent-220v ac 2 amp. 4] length as per customer's requirement. 5] float : nylon float, s.s. Guide tube 6] mounting flange nylon 7] connector din std. 8] available upto 1 meter level. 9] flange mounting of the float switch will be one to one replacement, as per your requirement.