Level Switches Dealers in Pune

We are offering liquid level float switches specifications :: 1] temperature : 50-150 (Degree C.) 2] contact rating-5 va 3] switching voltage/current-220v AC/ 2 Amp. 4] length as per customer requirement. 5] float : nylon, s.s. , p.u. 6] s.s. Guide tube 7] mounting flange nylon/ss 8] connector-weather proof connector, aluminum diecasting. 9] available up-to 1 mtr level. 10] flange mounting of the float switch will be one to one replacement, as per your requirement.

We are offering rod probe type capacitance level switch, protocontrol make rf admittance type level switch with rod probe is used for sensing the level of solid item like cement, lime, iron ore, food stuff, milk powder, flour, salt, plastic granules, powder & granules, salt in a hopper. The length of rod can be as per requirement of the field. The rod is designed with heavy duty ss rod having diameter of approx. 40mm. When the material touches the rod output signal is activated. the sensing probe is designed using special shield having coat guard circuit and hence nullifies effect of deposition on the probe. The sensor can well be used for sensing level of sticky material. control circuit can be integral with sensor probe or it can be mounted remotely if temperature at the product is higher that 100 degree cent. this level switch is suitable for highly dusty environment. It is also simple to install and easy to maintain. when the electronic circuit is integral with probe, control circuit is housed in cast al, ip 65 enclosure fitted on the sensor itself. The control circuit can also be mounted at remote if the process temp is more than 100 degree cent. Control supply can be 230 v ac, 50 hz (standard) .other voltages like 110 v ac, 24 v dc are available on request. the output is in the form of 2 co potential free relay contact. 5 amp resistive at 230v ac. ambient temp can be up to 0 to +60 deg for standard models, special models for fly ash where temp is more are having ptfe and ceramic coating. Switch have having facility of built in on and off nuisance delays of 2 to 20 sec. The switch can be programmed at site for top or bottom level monitoring with the help of selector switch.

Electronet series LCS-02 are Capacitance Type Level Switches. The vessel wall & probe forms two electrodes. If the vessel is of non-conductive material, the probe will be double rod type. The distance between the electrodes and surface area of the electrodes remains unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air and vacuum have relative dielectric constant as 1 and that of liquids is greater than 1. The capacitance of the capacitor therefore depends on how much material lies between the probe and vessel wall i.e. whether the probe is covered with or free from material. The capacitance changes with change in level of the material & provides switching output at the desired preset level.

We are listed as the renowned to offer an excellent quality gamut of low level switch. Our entire product range is designed and manufactured by our highly skilled technicians using premium grade factor inputs in accordance to the set industry norms. This switch is extensively used in drinking water to sewage, tanks and basin level control and also to protect overfill situations. Moreover, the offered switches are available in various specifications and can also be customized as per the details specified by our clients. general characteristics: mechanical level switch for liquids, the magnet equipped float follows the actual level of the liquid and magnetically triggers a reed switch in an identified and fixed position. Features: two switches enough to automatically start stop any pump. (coupled with contactor coil) good respectability all plastic construction, corrosion free non-contact sensing element compact design enables level sensing within 5 mm hysteresis (on leveloff level)can be easily set at site by locating the level switch updown along the side walls of the tank suitable for clean liquid technical specifications: media temperature - max.60°c cable length - pvc insulated 2 meter 2 core over all dimension - h = 60 mm w = 40 mm models - black body - norrly float - norrly switch voltage - 12 volts dc230ac contact rating - 500 m amp 230 vac contact type- nc protection class - ip 68 switch type - black normally closed contact the contact happens when the float is low.

Presenting Magnetic Float Type Level Switch which is one of the most important parts in any plant. The Magnetic Float Type Level Switch manufactured by us is best in terms of quality. Our products are manufactured using best grade material available and advanced technology. We are one of the best known and trusted manufacturers, exporters and suppliers of Magnetic Float Type Level Switches all over the country.

We are the leading manufacturer, exporter and suppliers of Magnetic Float Guided Level Liquid Switch in Maharashtra, India. These are a cost effective and reliable technique for single/multiple liquid level sensing and control. It is top mounted and suitable for conductive/non-conductive liquids. Manufactured using the best raw materials, they find applications in water treatment and filtration systems. We undertake bulk orders at affordable price.   Details : Cost effective and reliable technique for single/multiple liquid level sensing and control. It is top mounted and suitable for conductive/non-conductive liquids. Range - upto 3000mm Density - ≥0.6 g/cm3  Wtd Parts - SS304/316, PP or PVDF Max Temp - 150oC Max Pressure - 10 Kg/cm2 Contacts - 40VA (NO), 60VA(C/O) Enclosure - IP66, Ex-P Gr. IIB or IIC Options - Intrinsically Safe, Small /Large/Multiple Floats, In-Situ Test Device Applications : High & Low Alarm in Process Tanks, Water Treatment & Filtration Systems, Pump & Cooling Circuit Protection

We are offering a comprehensive range of Float Switch that can be added as an optional extra to the pump to control the water level in a tank and dam by switching the pump on and off electronically on low and high water level positions. A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.  

The Tilt Switch and Display System consists of three devices, Digital Tilt Sensor, controller device and display. The tilt sensor gives two angles while controller activates two relays depending upon angle limits. The Digital Display connects with tilt sensor and displays the two angles.

    • Motor torque adjustable• Special Clutch mechanism to protect Motor• Sealed bearing for Rotating shaft.

Cable float level switch X in turbulent industrial fluids and fluids with suspended agglomerates, such as sewer water.The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to the particular design of the switch element. This makes it suitable for applications where there may be wide or rapid fluctuations in ambient or fluid temperatures. Switching capacity of this new design of self-cleaning switch element is 10A at 250V ac

Leading manufacturer & trader of level switches, porcelain clad vaccum circuit breaker, unitized package substation, engineering switchgear, capacitance type level switch, sf6 circuit breaker, transducer and transducer.

Tilt switch level sensor is a very rugged and proven instrument for monitoring top level of bulk material stored in an open space or in a bunker silo. It has a special level detecting probe which is beyond a preset angle due to piling of material. The sensor probe is available in a robust MS tube for solids and a light duty plastic tube for food grains and fertilizer. Special models for use in hazardous environment are available.

To sense the level of bulk material such as lime stone, coal, Iron ore, Pellets etc. stored in open yard or in a bunker, or hopper etc. The working of this switch is more simple than capacitance type level switch.

Applications    • Free flowing powders and granules (size max. 10mm).• Suitable for side as well as top mounting.• Minimum and maximum fail safe field selectable.• Process temperature max 250 ºC.• Process pressure max. 15 bar.     Features   • Compact size.• Universal industrial power supply.  15 to 80 VDC & 15 to 265 VAC).• Low power consumption.• No calibration required.• Various customized process connections.   Starting from 1" threaded size.• Settable switching delay as a standard feature.