Industrial Switches Dealers in Thane

Flameproof pressure switches are designed as per is2148 for gas gr. Iic flameproof - ce certification and approved by a leading european lab – “baseefa” for atex & iceex certificates various ranges : from 0 to 150 mm wc upto 0 to 400 bar differential (dead band) : fixed (within 10% of set value) or, adjustable sensing element : diaphragm (ptfe, neoprene or, ss 316) or piston enclosure : flameproof to group iic

Flow switches when the float passes up in front of the switch the switch becomes open. (Break to alarm) Even if the float goes up beyond the level the switch remains open i.e. it latches off. Unless the float comes down and goes below the high level, the switch will not turn on. Thus the switch is Bi-stable with stable states.

A Flow switch is normally a simple device that monitors flow and sends a trip signal to another device such as a Pump to protect it. Flow switches are used for Pump protection, Cooling Circuit protection, high & low flow rate alarm and general flow monitoring. 32

The airflow transducer ESF-35-2 is installed in such a way that the current of air passes through the gap of the sensor head. Conductors to and from the transducer should be kept isolated from high-power conductors where powerful transient voltage spikes may appear. The ESF-35-2 transducer registers the airflow speed according to a thermal principle based on the fact that the cooling action of air increases with airspeed. The action is measured and converted to a 4 - 20mA or a 0 - 10 V signal corresponding to airflow speeds from 0 - 8 ms (0 - 1575 ftmin) or 0 - 16 ms (0 - 3150 ftmin).

we are actively committed towards trading, exporting and supplying well tested Pressure Switches. Offered switches are used in diverse industries to serve varied applications. As per the industry set norms, these switches are manufactured with the help of premium quality components and the latest technology at vendors’ end. Apart from this, we provide these switches in different specifications and at nominal rates.

A pressure switch for sensing fluid pressure contains a capsule, bellows, Bourdon tube, diaphragm or piston element that deforms or displaces proportionally to the applied pressure. The resulting motion is applied, either directly or through amplifying levers, to a set of switch contacts. Since pressure may be changing slowly and contacts should operate quickly, some kind of over-center mechanism such as a miniature snap-action switch is used to ensure quick operation of the contacts. One sensitive type of pressure switch uses mercury switches mounted on a Bourdon tube; the shifting weight of the mercury provides a useful over-center characteristic. The pressure switch may be adjustable, by moving the contacts or adjusting tension in a counterbalance spring. Industrial pressure switches may have a calibrated scale and pointer to show the set point of the switch. A pressure switch will have a differential range around its setpoint in which small changes of pressure do not change the state of the contacts.

Top Mounted Displacer level switch work on buoyancy principle. Specially for low density liquid. Adjustable switching distance throughout range suitable for maximum 30 meter length. Mounting : Internal OR External cage type Switching Point : 1 OR 2 Process Conn : 2” / 3” NB Switch Type : Micro switch 1 N/O – 1 N/C 5Amp 230 AC

flameproof push button on- off, only on off. Flameproof push button station with indicator. Flameproof push button starter with on - off & reverse button. Flameproof rotary switch upto 32amps. Weatherproof limit switch, weatherproof sfu 250amps. Weatherproof dol starter upto 20hp. Weatherproof star - delta starter upto 200hp. Flameproof weatherproof switch socket compressed upto 63amps. Flameproof weatherproof switch socket compressed upto 63amps. Flameproof weatherproof control gear suitable for hpmw metal halide fitting. Flameproof fire alarm manual call point. Flameproof weatherproof switch socket combined up to 63a 215 v 450 v

A limit switch box is mounted on and coupled to the actuator in order to operate position-indicating lights on control panels; to control other equipment such as pumps, compressors and mixers; to sequence other valves, or for feedback and PLC position confirmation. Two single pole double throw (SPDT) switches are mounted in one enclosure and are activated by individual, adjustable cams. The limit switch box is available in weatherproof enclosures, and switches can be supplied in mechanical or proximity models.

Buy excellence in the form of Magnetic Level Switches at coffer-friendly prices, from us!From markets of Maharashtra(India) to any other, we are capable of providing our product to the buyers anywhere.

We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Side & Top Magnetic Level Indicator. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life.. The switch works on magnetic principle. The float carries a powerful magnet activating the microswitch which is enclosed in a FLP/WP housing. This snap acting switch is completely Glandless, hence no leakage possibility in the Switch housing.Enclosure       - Whether proof / Flame proofMOC                 - CS/SS 304 /SS 316/PPContacts         -1 No + 1 NcSwitch Rating - 5 Amps X 230 VAC Snap acting microswitch Size     - Min. 50 NB -150 NB Max.                       Flanged / Screw type.

Vacuum Switches, Pressure Gauges, Conductivity Indicators, Flow Transmitter