Worm Geared Motor Dealers

Stark Gears Worm reducers of robust construction, have been introduced to meet the increasing demand for efficient drives. Due to high efficiency and smooth running, the demand for these. Stark Gears Worm reducers is increasing. The entire design is based mainly on BS: 721 and accuracy to class "A" limits. The worm integral with its shaft, is carefully generated from a nickel alloy steel, case hardened on the threads, precision ground and polished to very fine tolerances. The bearings, oil seals and other cylindrical portions of the shaft are carefully ground and protected during manufacture, storage and after assembly.   Types of Gear Boxes The following are a few examples of standard worm reduction units, sizes starting from 1.125" (28.575 mm) to 17" (431.8 mm) Centre Distance and ratios from 5:1 to 70:1 in case of single reduction and from 75:1 to 4900:1 in case of double reduction.   Adaptable - Single reduction SA (Stark Gears Adaptable without feet) SAU (Stark Gears Adaptable Under driven) SAO (Stark Gears Adaptable Over driven) SAV (Stark Gears Adaptable Vertical output shaft) SAIV (Stark Gears Adaptable Input shaft Vertical) SASM (Stark Gears Adaptable Shaft Mounted) SAM (Stark Gears Adaptable Motorised unit) Foot Mounted - Double reduction FUD (Foot Mounted Under driven double reduction) FOD (Foot Mounted Over driven double reduction) FVD (Foot Mounted Vertical output shaft double reduction) Shaft Mounted - Single & Double reduction SMWR-E (Shaft Mounted Worm Reducers type- E) SMWRD-E (Shaft Mounted double reduction Worm Reducers type- E)   Adaptable - Double reduction SAUD (Stark Gears Adaptable Under driven - Double reduction) SAOD (Stark Gears Adaptable Over driven - Double reduction) SAVD (Stark Gears Adaptable Vertical output shaft - Double reduction) Foot Mounted - Single reduction FU (Foot Mounted Under driven) FO (Foot Mounted Over driven) FV (Foot Mounted Vertical output shaft) FVSDS (Foot Mounted Vertical Standard Duty Stirrer) FVHDS (Foot Mounted Vertical Heavy Duty Stirrer) FVCT (Foot Mounted Vertical Cooling Tower Duty) FUL (Foot Mounted Under driven Lift Duty) GEAR CASE Stark Gears Gear Casings, modern in appearance, are made from close-grained Cast Iron conforming to IS:21 0. The heat dissipating capacity of the case is increased by means of high velocity of air, driven over the cooling fins on each side of the case by means of a fan mounted on an extension of the worm shaft.

Worm geared motor Rigid and precise cast iron monolithic casing with motor mounting integral flange, Improved and up-graded modular construction both for components and assembled products.

Manufacturer and Supplier of PMDC Worm Gear Motors 200W; we are one of the most reliable name in this industry. We are flexible in bringing forth Worm Gear Motors, manufactured only under the vigil supervision of professionals. We have advanced infrastructure that is equipped with latest technology. We are working with a pool of diligent staff, having rich experience; they ensure that the Motors are as per the accepted standards.   Specification Supply : DC 12 volt to 230 volt DC. Capacity : 200 watt RPM : As per customer requirement.  Mounting, foot, flange & face. Motor Dimension 100*100*260mm. Flange mounting, 10mm's 4 hole on105mm pcd. Delivery Time  15 Day After PO Weight 5.000kg

For quietness of operation, high speed-reduction ratio and for shaft axes at right angles to each other, worm-type reduction unit is normally used. This can be of double reduction type if very low speeds are envisaged.

Construction Features: * Ball bearing to motor and Gear Box also    * Shaft dia(max. 15 mm) & length to suit Output shaft drive clockwise/ counter clockwise    * Motor-single phase capacitor run/Three phase 50 Hz Motor power 1/20 to 1/8 h.p.    * Out-put shaft perpendicular to Motor-Downward/upward or sideways    * Ratio's available -10 ,16,24,38,48    *  Torque max. - 150 kg. cm.Feature :* Low noise Gear design Compact size with strong output    * Wide variety available    * Long life expectancy* Many more products to come.

We are offering helical worm geared motors. Series c right angle helical worm geared motors and reducers provide a highly efficient and compact solution to meet most requirements upto 45 kw with maximum output torque capacity of 10,000 nm. units are available with ratios coverage of 8:1 to 250:1 in double reduction, upto 900:1 in triple reduction and upto 16000:1 in combined units.

Helical worm geared motors are the favorably-priced solution for drives with angular geared motors. The efficiency is significantly better than that of pure worm geared motors due to the implementation as helical-worm geared motors.

Combination Gear Drives, Planetary Worm Gear Boxes, Planetary Worm Gear Boxes, Planetary Worm Gear Boxes Manufacturers, Planetary Worm Gear Boxes Exporters, Planetary Worm Gear Boxes Suppliers, Mumbai, India Manufacturers of High Quality Planetary Worm Gear Boxes. All shafts are made of special alloy steel and are hardened and tempered, Sun and Planet gears are made of case carburizing alloy steel & are case carburized and ground, he Ring Gear is made of forged alloy steel, Full complimentary roller bearing for planets. (except for Model 019), Accurate positioning of planets and hence, best load sharing, Good quality bearings for input and output shafts, High efficiency , Low noise level , No oil leakages , Taper roller bearings on output shafts for bigger models, Long and trouble free performance.

Our company is reputed as trader in the industry and situated in the well-connected area of Jaipur(India). Due to our exceptional and completely secured payment procedures, we have successfully gained full customer satisfaction. We make available varied payment procedures to ensure smooth transactions.Features : Precisely designed High functionality Long working life