Tablet Compression Machine Dealers

         Compression Testing Machine incorporates design features to enables high accuracy testing with economy, speed and versatility. Loading accuracy as high as + 1%. Straining at variable speeds to suit a wide range of materials. Continous roll autographic recorder supplied as standard to enable study of the behaviors of materials. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Large effective clearance between columns enables testing of standard specimen as well as structures. Simple controls for ease of operation. Robust straining frame of an extremely rigid construction. Safe operation ensured by means of safety devices.     Application : Compression Testing Machine is designed to test materials and other materials under compression, bending, transverse and shear loads. Hardness test on metals can also be conducted.   Principal of Operation : Operation of the machine is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.   Machine consists of :    Straining Unit :   This consists of a hydraulic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height. An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.   Control Panel :  The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.    Power Pack : The power pack generates the maximum pressure of 200 kgf/cm2. The hydraulic pump provides continuously no pulsating oil flow. Hence the load application is very smooth.    Hydraulic Controls : Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporate in the hydraulic system is a regulation valve, which maintains a practically constant rate of table movement.    Load Indicator System : This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically, cuts out the pump motor when the load range in use is exceeded.    Pendulum Dynamometer :  This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.    Autographic Continuous Roll Load-Elongation Recorder : This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ratio of either 1:5 or 1:10.A continuous roll of graph paper is stored inside the drum and is easily replaced.   Accuracy & Calibration :  AII Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 and IS : 1828, FIE Compression Testing Machines comply with Grade "A" of BS : 1610 and class 1 of IS 1828. An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.   Special Accessories : These include load stabilizer, Brinell test attachment, Bend Test attachment, Shear Test attachment and a wide range of accessories offered on request at additional cost.   Installation : It is recommended that machines be erected on a foundation. Details on foundation can be given on request.FIE reserves the rights of change in the above specifications due constant improvement in design. The dimensions given above are all approximate.    

We are offering laboratory civil engineering compression testing machine. specification: we supply compression testing machine - plate model, complete with single pressure gauge & self made motor, 440 ‘v’ load frames. Available in 50 tons, 100 tons, 150 tons, 200 tons, 300 tons, 500 tons salient features : the compression testing machine incorporates design features to enable high accuracy testing with economy, speed & versatility. • loading accuracy as high as + 1% • straining at variable speeds to suit a wide range of materials. • continuous roll autographic recorder supplied as standard to enable study of the behavior of materials • motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen. • high reading accuracy due to large size and design of dial. • wide range of standard and special accessories, including load stabilizer. • large effective clearance between columns enables testing of standards specimens as well as structures. • simple controls for easy of operation. • robust staining frame of an extremely rigid construction. • safe operation ensured be means of safety devices. Other information pay mode terms: tt (bank transfer) minimum order quantity: 01 piece packaging details: wooden packing

EN 12390-4, ASTM C39, AASHTO T22, IS : 14858 (2000) Automatic Test Execution Set test parameters - including load rate and Press the start button The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure Save the test including data results and load-time graph (Optional) Dual stage pump assuring fast piston approach and precise test execution Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22 Controllable pace rate from 1 KN/Sec to 10 KN/Sec. Inbuilt graph in the touch screen display. Auto stop and auto release after completion of each test. Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions. Complete IP based controller. Working on 240V, 50-60Hz, single phase. Frame Four column high stiffness welded frame tested for stability. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens Series TM-042-AA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150x300 mm and cubes up to 200 mm. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. Attachment for Paver block testing is available at extra cost. Safety Features Max. pressure valve to avoid machine overloading Piston travel limit switch (Extra cost) Emergency stop button Hardware 132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional). Optional Accessories at extra Cost Dedicated Data manager PC software

Recycling is a process to convert used (waste) materials into new products. This reduces the need to extract fresh, raw material from the Earth. It helps conserve natural resources. It also saves energy, that is, the energy consumption in the manufacturing process by utilizing recycled materials is considerably less than that consumed for producing new products from fresh raw materials. Recycling helps protect the natural habitats by reducing the need for extracting, refining and processing the raw materials. When the recyclable materials are reprocessed into new products, the resulting amount of rubbish sent to landfill sites reduces to a large extent. This in turn, reduces air pollution (from incineration) and water pollution (from landfilling), and also lowers the greenhouse gas emissions (from waste dumps). Effective recycling starts with every household, workplace and school (or the place where the waste was created). In many countries, the authorities who are serious towards conservation of environment assists the people in efficiently and effectively manage the waste. In the households they advise the labeling of the bin bags to sort out the waste for the corresponding recycling treatments after garbage collection.

We manufacture and offer quality range of compression testing machines (manually operated, manual cum electrically operated electronic)). These are widely used in construction, rubber, spring manufacturing and similar other industries where compressive strength of the material is required to be tested. The machine is ideal for checking compressive strength of concrete blocks, bricks, rubber pads, and buffer springs.

■  Load indication either by analogue type indicator or by DRO through transducer. Linear transducer may be provided for deflection indication. ■  Spring Testing Machine both for load deflection & scrag testing. ■  Fatigue Testing Machine.