Industrial Scrubbers Dealers in Ghaziabad

Highly efficient custom designed solutions for removal of air borne pollutants from your process area. Various system are designed & commissioned on turn-key basis, based on your plant requirements, such as Top or Canopy Hood Suction. Side or Lateral Suction. Push-Pull Suction for large open Tanks. Direct Suction from Closed Vessels. Laboratory Bench Fume Hoods. Bio-gas & ETP Hoods Domes Covers.

cater a large array of high grade quality Wet Scrubbers that mainly includes venturi scrubbers, packed bed columns, spray tower and wetting wall columns. We have firmly positioned ourselves as one of the preeminent wet air scrubbers exporters and suppliers in India. These gas wet scrubbers are manufactured from the qualitative FRP, PVC/FRP, PP/FRP, PVDF/FRP, FRP, FRP, FRB, FRVE etc. Vertical packed tower wet fumes scrubber & Horizontal type packed bed fumes scrubber provide high efficiency and low cleaning cost. Different types of scrubber are used as per the air quality requirements.

Highly effective custom designed units for removal of airborne pollutants from your plants area. Based on your process, one of the following can have selected & installed with or without scrubbing unit filters. Top hood extraction side hood extraction. Push-pull extraction for very large open tanks. Direct suction from closed vessels tanks. Laboratory bench extraction. Bio-gas collection hoods v-notches ducts etc.

Catering to the specific needs of the clients, the fume exhaust system, which we offer, are the best way to remove the air borne pollutants from the processing area. We are one of the most credible manufacturers, suppliers and exporters of the laboratory bench fume hoods from ghaziabad. We design and commission, these fume exhaust systems on turn-key basis, based on the requirement of the plants such as : laboratory bench fume hoodsside or lateral suctionpush-pull suction for large open tankstop or canopy hood suctionbio-gas & etp hoods / domes / coversdirect suction from closed vessels

Shivas commitment to workplace safety extends to the environment also.Having removed hazardous fumes from industrial or laboratory processes, the safe capture of these can be achieved either by Carbon Filtration or Scrubbing. Scrubbing presents a large surface area of liquid to the gasses which are in turn absorbed into it. This provides a convenient method of disposal such as Effluent Plant for treatment, Containerisation or Neutralisation within the scrubber. Scrubbers are available in a number of different types such as the Packed bed tower or the modern option of steve tray scrubbing as developed by SHIVAS. The advantage of the steve tray (Plate Type) scrubber is its low maintenance requirement with few consumable components.   Counterflow separators   Counter Flow fume scrubbers are designed for contaminants, which are difficult to absorb for all airflow requirements. The Counter Flow design offers advantages in the efficient and effective use of scrubbing solutions, as well as in a higher separator efficiency, especially for deep beds of packing. High removal efficiency is advantageous where the contaminants are highly offensive or have recovery value. In this design mist and separating solutions carry-over at high gas velocity is minimized by the use of dry packed bed mist eliminators. Counter Flow separators are available with a variety of tower internals; each designed to achieve a maximum in efficiency at a minimum of cost. The separators are available with packed beds in height ranging from 1.2 metres to 6.0 metres. The choice between B and C Series separators must be based upon headroom required separating efficiency and future exhaust requirements. Series B separator internals may be modified so as to achieve separating efficiency equal to Series C separator. Standard fume separators are packed with 50mm plastic tower fill, eg tellerettes give a higher target efficiency with mist and light dust problems. Corrosive Resistant Construction from : Polyvinyl chloride sheet (PVC) Polypropylene sheet Polyvinyl dene fluoride sheet (PVDF) Polyethylene (PE)

Ghaziabad Polymers Pvt. Ltd. packed bed scrubbers are versatile, reliable systems that serve the widest variety of processes. They are used and specified worldwide. GPPL packed scrubber are highly recommended for the efficient removal of inorganic gases, odor and fumes and are particularly appropriate where gas streams have extreme pH. They are well suited for use as primary or secondary system in conjunction with thermal oxidizer and are also used in a series where there are multiple-contaminant gas stream. - For gaseous emission NOx, CI2,So2 & Others. - Acid fumes including H2SO4HCI, HNO3 & HF. - Odor Control- Single and multi stage units. - Combination systems for hot and cold systems. - System can incorporate particulate controls, gas quench, venturies and carbon systems. - MOC of different metallic and FRP materials according to chemical compatibility and design consideration. Design CriteriaFlow rate: this is determined by the process to be handled by the scrubber, through information provided by customer and GPPL expert analysis. We provide the system from range of 1000 CMH to 50,000 CMH and above. Configuration: Scrubber orientation(Vertical/Horizontal/Circular), Internal Vs External circulation, fan location with respect to tower, duct size,inlet-outlet and location of recirculation pump, tower access service port, service platform, internal accessories like polyring, mist eliminator, spray nozzles, flow measurement equipments. Material of construction: Determined by application because most contaminants involve corrosive gases and fumes, material must be able to withstand continuous contact with high and pH gases and scrubbing solutions.

We are able to offer an unmatched range of Wet Scrubber to respectable clients. These products offered by us are made using high grade raw material and latest technology in strict compliance with the industry laid norms and standards. Along with this, the offered range is known for handling and curbing the toxic fumes from numerous industrial processes. ADVANCE ADVANTAGE OF WET SCRUBBER Excellent performance. Consumes less power. Durable. Precision engineering.

Wet Scrubber, Centrifugal Blowers, Centrifugal Blowers, FRP Pressure Tan

Fume Exhaust Systems, Industrial Fan, Air Compressor Tank, Axial Flow Fa

PP Scrubber, FRP Scrubber, Pickling Tanks, PP Blowe

Industrial Scrubber, Centrifugal Air Blowers, Bike Filte

ESP Spares, Forgin

Ash Conditioner, Orifice Plate, Quick Exhaust Valve, Pneumatic sealsPneu

Wet Scrubber, HVAC Services, Jet Fan, Dry Type Scrubber, Bifurcated Fa

U K ENVIRO offers venturi scrubbing system (no need of blower) backed by a comprehensive design, manufacturing and installation service are used for removal of Acid fumes.

Air Scrubber, Air Washer, Centrifugal Fan, Jet Fan, Cabinet Fa

Fume Extraction Systems, Axial Flow Fans, Sheet Metal Air Cooling Syste

Fume Extraction Scrubbers, PP FRP Pipes, PP FRP Tanks, FRP Linin

Industrial Scrubbers, Graphite Block Heat Exchanger, Polyethylene Tan

Wet Scrubber, Scrapper, Oil Skimmer Carbon Filter, Air Blower, Agitato

Wet Scrubber, FRP Tanks, Centrifugal Blowe