Pleated Filters Dealers in Ghaziabad

Pleated Series Filter Bags are available for all industry-standard housings in a wide array of micron ratings. These bags are constructed with polypropylene or polyester felt and provide more then four times the surface area of standard filter bags.

Purchasers can rely on us to make on time distribution of orders, as we have cooperated with established transportation facility providers. Our warehouse is installed with advanced machines and all required amenities ensuring safe storage of diverse kinds of products requiring different storage temperatures and conditions.   Features : Corrosion resistance Dimensional accuracy Longer service life

• Shape:: Round
• Length:: 10
• Filter Medium Material:: Activated Carbon,PP
• Filter Type:: Pleated Filter
• Material:: Polypropylene
• Micron ratings:: 0.1TO 40 micron

Polypropylene pleated cartridges are available with absolute rating. It is ideal for low viscosity aqueous solution. Cartridges are constructed completely from polypropylene. Outer and inner surface, are supported by Polypropylene media that help out to avoid media migration. End caps are heat sealed to core & media. It avoid to any leaching problem. DOE construction rule out cartridge adaptor fittings. It has good thermal and broad chemical resistance.

• Type: HEPA AIR FILTER 
• Filter Type: H14
• Usage/Application: Air Filter
• Filter Medium Material: Fiberglass
• Shape: Square

These filters are generally made from the latest technology SPUN BONDED polyester media, which offers unique advantage of high strength, air flow along with good efficiency. Pleated filter bags are recommended for use in the dust collection application where the dust load in the raw gas exceeds 10 gm/NM3. Nature of dust also plays very important part in deciding filter area and type of media. The density of the dust, is the crucial parameter, according to which, various Air-to-cloth (ACR) ratio has been set as the light dust particle requires low can velocity as compared to heavy dust particles. Size: 130 Ø & 160 Ø Length - 330 mm ~ 2100 mm Top Fitment- PU/ Metallic Filteration Area as per Size* Pleat Depth = 16 ~ 25 mm

  Polypropylene pleated cartridges are available with absolute rating. It is ideal for low viscosity aqueous solution. Cartridges are constructed completely from polypropylene. Outer and inner surface, are supported by Polypropylene media that help out to avoid media migration. End caps are heat sealed to core & media. It avoid to any leaching problem. DOE construction rule out cartridge adaptor fittings. It has good thermal and broad chemical resistance.   LCD, Plating Industry: High quality feed water is crucial, it exceed quality of final products. Food and Beverages Industry: It is very ideal for potable water, process and blending water in food and beverages industry. Pharmaceutical Industry: Pre filtration, final filtration of process water, Air, Bulk drugs, water and solvent. Electronics Industry: Electronics Industry required huge quantity of clean water in process. PPCF is ideal for absolute removal for Particulate, due to graded structure, typically RO plants, DM plant, prefilter, process and wash water.

Pleated Cartridge Filter Bags, Coarse Bubble Diffusers, screen printing mesh

The company is engaged in manufacturing, supplying and exporting the best quality Pleated Cartridge Filter Bags. Pleated Cartridge Filter Bags, offered by us, are made using the advanced machines under the guidance of the engineers. Pleated Filtration Media generally has a few advantages over traditional filter media. The pleat greatly increases the filter surface area allowing for lower air to cloth ratios in the same space. Layers of deep pockets made of woven fabric allow for higher dust retention rates. Additionally, with shorter overall bag lengths Pleated Cartridge Filter Bags remain above the inlet gas stream, reducing abrasion caused by incoming dust particles. Pleated Cartridge Filter Bags are designed to replace fabric bag filters and cages used in many dust collectors. Often Pleated Cartridge Filter Bags can be made to fit most existing bag houses without the need for extensive redesigns. Pleated Cartridge Filter Bags are easily mounted into various size cell plates for both top and bottom load dust collectors. Advantages : Lower maintenance costsEfficiencies up to 99.97%Higher air flow per filter unitLess frequent change-outsBetter resistance to inlet abrasionUp to a 5-fold increase in surface filtrationWashable exteriorMinimizes compressed air usage Specifications : Media :PolyesterAcrylicPolypropyleneNomexRyton Tops :Molded polyurethane tops & bottomsInjection molded EPDM tops & bottomsHard Polyurethane tops & bottomsGalvanized or S.S 304 / 316 tops suitable for collar type & snap band type bags. Inner Core :Perforated metal ( Galvanized or painted )Expanded metal ( Galvanized or painted )Both are either in M.S. or S.S. Bottoms :Molded polyurethane PucksGalvanized or S.S 304/316 pan- typeHard polyurethane Pucks Tube-Sheet Diameter :Ranging from 135 mm to 162 mm tube-sheet with 5 mm thick plate.Suitable for all O.E.M’ S designs Construction :Customized pleated counts.Customized bag lengths. Upgrade Your Existing Dust Collectors Using Pleated Filters : Each year, increasingly stricter environmental regulations are coming into force. These new requirements are beginning to tax many plants already aging dust collection infrastructure. Additionally, many plants are looking to and are forcing their existing system to operate at higher and higher production demands. Usually the simplest solution to this problem is to upgrade to a newer, more efficient dust collection system. However with a sluggish economy causing many to cut back on maintenance expenditures, this often times is not possible. How then, can plant managers and operators keep in compliance with new regulations when they face constantly shrinking budgets? In certain situations, an alternative to costly rebuilds is to install new pleated filtration media in the existing dust collection system. These filter elements can be designed to fit your current Baghouse tubesheet. Pleated Filtration Media may provide double or triple the filtration area inside your Baghouse, and dramatically reduce your differential pressure and air-to-cloth ratios. This provides increased airflow, reduced cleaning energy costs, and improved performance.

The company is one of the most sought-after Manufacturers, Exporters and Suppliers of Pleated Filter Cartridges in Ghaziabad. The Pleated Filter Cartridges are known for their strength. For lesser pleat depths, the Pleated Bags are the best solution as the pleat depth and dust load are inversely proportional. Higher dust load should be dealt with less pleat depth. The Pleated Filter Cartridges are quality products offered on a timely basis. Features Of Pleated Filter Cartridges Made from the latest technology Spun Bonded polyesterAirflow along with the good efficiencyUsed in the dust collection applications where the dust load in the raw gas is less then 10 gsm/NM3Pleat Depth In The Cartridge Filters Ore : 40 mm & 48 mmStandard cartridges of size 225 & 325 mm diameter respectively Coatings Available PTFE Coatings (CX-12T)Aluminium Powder Coating (CX-12AL)Standard Finish Media PTFE Membrane Laminated (CX-12-ePTF)

Pleated Filters, shot peening machine, Shot Blasting Equipment

Pleated Filter Bag, Fine Disc Diffuser, Pulse Jet Filter Bag

Pleated Filter Bag, Fine Bubble Disc Diffuser, MBBR Fab Media