Electric Control Panels Dealers in Greater Noida

Being a reckoned name in the industry, we are involved in manufacturing, exporting and supplying an exceptional assortment of Electrical Panels by being based in Greater Noida, Uttar Pradesh, India.The offered Electrical Panel is tested on numerous parameters of quality in order to dispatch a defect free array to clients. We manufacture this product from the high quality material under the directions of skilled professionals following the set norms of industry.

LT PanelsLT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Backed by a team of experts we are presenting our valuable clients a comprehensive range of LT Panels. Our product range is treasured for their high performance, low maintenance, reliable performance, easy to install and safety features.HT PanelsHT panels are compact outdoor type systems, which are broadly used in substations. Our product range is prepared from Circuit Breakers or switch fuse on HT side, which protects the equipment from sudden voltage fluctuation

It is used to maintain power factor by the use of capacitor bank to suit the variations in inductive/resistive loads. Specially in industrial sector, heavy inductive loads are very common to give low power factor, which results in higher demand charges and also low power factor penalties. APFC panel provides automatic switching operation of the suitable capacitor bank for fixing power factor from load fluctuation.Features : User friendly microprocessor based APFC relay. Modular design with easier assembly, Installation & maintenance. Power factor correction done with help of power factor controller & power contactors by switching In/Out 6/8/12 steps of capacitor banks. Used for three phase loads.   Availability : Contactor based and PMC based

PLC Panel is designed to control electrical power supply using programmable control logic processor. We are renowned Manufacturer, Exporter and Supplier PLC Panel from Greater Noida, India. We manufacture a wide range of products of high quality at comprehensive prices. PLC Panel supplied by us is created putting high grade raw materials to use. We are backed by an experienced team of professionals which offer customer satisfaction and timely bulk deliveries.

The basic materials named as raw materials should be of top-notch quality in order to maintain the quality of the finished goods. Thus, our experts source the raw materials only from the reliable vendors. We make available the product range that is as per the customers; exact requirement and needs. The offered Power Factor Panel is featured with analog display and available in different technical specifications.

Based in Greater Noida (India), we are reckoned for manufacturing and supplying high-quality Electric Panels to serve in various industry sectors. Developed in our state-of-the-art production facility, these Electric Panels are quality assured. Distinct specifications of Electric Panels are attainable from us, at guaranteed best prices. Also, we address bulk queries.   Integro specialises in the design and manufacture of high quality industrial control systems in all industry sectors. We have an in- house facility for the design, manufacture and installation of array of electrical panels which includes Motor Control Centres Process Control Panels Power control centres (PCC) Power Supply Distribution panels (PDB) Automatic Power factor Control panels (APFC) Change over panels Synchronizing panels LT distribution panels Light Control panels VFD Control Panels Feeder Pillar panels Custom Built PanelIntegro provides a solution-led service, designing custom electrical control systems and electrical control panels for a diverse range of industry sectors. This is useful for the clients whose requirements are not met with the standard products and require more expertise to produce something that satisfies their particular requirements, from simple push-button operation to more sophisticated and automated systems. Custom designed electrical control panels will provide the information you need at the time you want it and in the right place. We maintain close communications with our clients with regard to their special requirements and specifications, monitoring all aspects of the project from design to completion and final testing and commissioning.   General Features : Cable Entry : Top/Bottom Enclosure MOC : CRCA Powder Coated/SS-304/316/Flame Proof(Suitable for Gas Gr.2A/2B/2C) Size : Standard /Custom Designed Mounting : Free Standing/Wall Mounted Doors : Double/Single Opening : Front /Front & Back Enclosure type : Standard Non Compartmentalized/Compartmentalized/Fixed/Draw-out Type

We are offering power control centres. electro controls and devices is one of the jubilant power control panel manufacturers and electrical control center suppliers, based in india. The manufacturing of our power control center is based upon several technical specifications. Its performance and longevity is simply unmatched. Lastly, we offer our power control center at most competitive prices. we are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features: panels will be suitable for 415 ± 6% volt, 3 phase (4 w + e) 50 hz ac supply they will be installed indoors and will work efficiently up to an ambient temperature of 50°c all doors will be suitably labeled and marked for convenience of operation & maintenance. construction modular design free standing floor mounting type using 2.0/1.6 mm crca sheet. the complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired. finish the entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. bus bars & internal wiring uniform cross section copper bus bars (current density 1.39 amps/sq mm.) supported by smc /dmc bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade pvc insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles earthing bus bars will be running all along the board. switch gears/ components along with the formal offer, the ga drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. standards ours panels conform to the standards such as, is 4237; is 8623; is 375 switch gears/ components along with the formal offer, the ga drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

We are an eminent firm that manufactures and supplies Electric Control Panels widely used in Computers and remote controls. Our range of Electric Control Panels is well appraised for their superior features and uniquely designed structure. We are backed by a team of experts who are efficient in handling all kinds of bulk and wholesale orders place with us and assure a timely delivery

E&P offers sheet steel or GRP enclosures for indoor or outdoor location, with ingress protection up to IP66. All types of control are offered with the options/facilities like : Motor control, Process control, Environmental control (Heating & Vent), Alarm systems and custom controls. Some basic details about our Panels are mentioned below. 1. Custom Built Low  Voltage Switchboardsa) Power Control Center b) Motor Control Center c) Distribution Boards d) Control and Relay Panel e) PLC – AMF and DGf) Bus-ducts and Rising Mainsg) Feeder Pillars and Junction Boxesh) Soft Starter and Frequency Drive Panelsi) SCADA based Panelsj) Thyrister / Relay based APFC Panelsk) Metering Panelsl) Testing Panelsm) Power Factor Correction Panelsn) AMF Panelso) PLC Panelsp) AC Drive Panels

These panels are made up of solar cells, which have the property of directly converting sunlight into electricity by photovoltaic effect. The solar cells constituting these panels are made up of monocrystalline or polycrystalline silicon wafers. Features & Specification Mounted on tough aluminum frame. Sealed junction box seldom needs maintenance. Narrow power tolerance. Low iron tempered front glass. High quality Anodized Aluminum frame to provide protection to laminate and provide structural strength. Environment friendly product. High efficiency – ensures less space requirements. Applications At homes, offices, buildings, factories etc.  

Integro specialises in the design and manufacture of high quality industrial control systems in all industry sectors. We have an in- house facility for the design, manufacture and installation of array of electrical panels which includes Motor Control Centres Process Control Panels Power control centres (PCC) Power Supply Distribution panels (PDB) Automatic Power factor Control panels (APFC) Change over panels Synchronizing panels LT distribution panels Light Control panels VFD Control Panels Feeder Pillar panels Custom Built PanelIntegro provides a solution-led service, designing custom electrical control systems and electrical control panels for a diverse range of industry sectors. This is useful for the clients whose requirements are not met with the standard products and require more expertise to produce something that satisfies their particular requirements, from simple push-button operation to more sophisticated and automated systems. Custom designed electrical control panels will provide the information you need at the time you want it and in the right place. We maintain close communications with our clients with regard to their special requirements and specifications, monitoring all aspects of the project from design to completion and final testing and commissioning.General Features Cable Entry : Top/Bottom Enclosure MOC : CRCA Powder Coated/SS-304/316/Flame Proof(Suitable for Gas Gr.2A/2B/2C) Size : Standard /Custom Designed Mounting : Free Standing/Wall Mounted Doors : Double/Single Opening : Front /Front & Back Enclosure type : Standard Non Compartmentalized/Compartmentalized/Fixed/Draw-out Type  

PLC Automation Control Panel, Transformer Oil Filters, Distribution Boar

Electric Control Panels, Relay Panel, AMF Panel, Servo Stabilise

Automatic Voltage Regulator, Automatic Changeover Switch, AMF Pane