GETECH INDUSTRIES Cherlapalli, Hyderabad, Telangana

Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications Getech Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly

The main content of this filter consists of a highly compressed ceramic diatom.  It is highly resistant to heat as tested by professionals.  The Ceramic Filter removes all dirt, sand particles, bacteria, amoeba etc from the water.  The diameter of Ceramic Filter is 0.2 micron whereas the diameter of bacteria is 0.5 to 1.0 micron.  This filter ensures that your water is free from harmful diseases like cholera, typhoid, dysentery etc.

We are trading from the leading mfgs in India & Abroad, casing pipes using latest technology for Bore/ Bore-wells. CM type:40 mm to 250 mm with normal measurements CS type:150 mm to 250 mm with normal measurements CM (middle type well):Suitable pipes for wells of depth 150 mtr to 250 mtr CS (small type well):Suitable pipes for 80 mtr depth wells Specifications & Benefits Better quality, similar wall thickness and well-built Compressive energy with adequate pressure Light weight for easy transportation & to set Water drawing easier as bore works uninterrupted Specifications Precise Gravity: 1.40 g/cm3 - 1.45 cm3 Wicket Softening Temperature: 76 degree centigrade Tensile Energy: 50 + or - N/mm2 Effective Energy: IS - 12818 applicable Productive Energy: 55 N/cm2 Guidelines to Connect Put down carefully casings and ribbed screens into bore-wells Select gravel packing after checking soil status as plot quantity for screens depends on it Ensure no empty space while gravel packing the pipe Avoid high pressure and pressure in opposite direction while drawing water Process to Joint Male thread and female thread are fixed either side of our casing, ribbed and screen pipes Joints have better tensile power than others to carry more assembly weights to deeper levels Load decreases on threaded joints when total assembly weight rests under water Quality Control Technology equipment of international standards to ensure better quality of pipes through tests. With its experienced and well trained staff the company is manufacturing the best quality and incomparable products of high capacity. We comply with ISI norms and specifications to test the products.  

Water Level indicator (100m – 1000m depth) with counter mechanism is a very handy device to quickly check the level of water in open wells and in borewells. A sensor attached to the end of a cable, wound on a winch is lowered in to the well. over a calibrated wheel attached to the counter mechanism. The moment the sensor touches the water surface, a panel meter on the winch which is on the ground shows full deflection with buzzer sound. The depth to the water level from the ground can be read off in metric scale on the counter.

A company you can trust for reliable products. Single toggle type with rugged construction, to with - stand vibration and heavy shock loads. For more production, higher efficiency and greater economy.

Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.

Increase in the life of Drill Rods by 90% than the normal Drill Rods One side rubbing, hole deviation and leakage at joints will not occur No weld layer will be visible and therefore less tolerance in the rod guide. Traction force and Strength will be increased by 40% Available sizes - 3"/31/2"/41/2"/51/2"/8"

Hammers are manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The products are heat - treated in the most modern, fully process controlled, in-house facility. The Carbide Buttons which are used are obtained from leading and reputed indigenous and foreign manufacturers. GETECH Hammer are quality products that conform to international standards and strict quality control methods. GETECH products are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure,

Drill Pipes / Heavy Weight Drill Pipes / Drill Collars Production Tubing (API & Premium Connections) Casing Pipes (API & Premium Connections) Coupling, Pup-Joints & Cross Overs Oil Field Accessories & Services Repair / Reconditioning of Drill Pipes / Premium Connections  Field Inspection Services

  100 x 200 x 400 mm (16" x 8" x 4") - 8 Blocks / Stroke 150 x 200 x 400 mm (16" x 8" x 6") - 5 Blocks / Stroke 200 x 200 x 400 mm (16" x 8" x 8") - 4 Blocks / Stroke Hollow Mould and Solid Mould prices will vary.