Elastomeric Coatings Dealers

We do end to end turnkey projects across Pan India starting 40 rupees per Sft including Labour, material, transport and all inclusive. We use Acyrlic Elastomeric Polymer Waterproofing coating using 4 layers process as below: All surfaces to be coated will be made clean, dry and free from dust, dirt, oil grease and other contaminants. Concrete and Cementitious substrates will be well compacted. Rainseal is applied using Soft Brush or Rollers or Spray guns. It’s a 4 layer process – First layer is Primer (diluted Rainseal), Second layer is first coating of Rainseal, third layer is Geotextile membrane for reinforcement and fourth layer is Rainseal second coating. 2-3 hours needed to dry each of the layers. The final thickness to be achieved depends on the requirements of the individual roof. Video of the Application Process:

High Performance acrylic polymer modified elastomeric waterproofing is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durablewater tight coating which cannot be easily damaged orworn away.

We are offering elastomeric coating is a single component acrylic co-polymer. The coating on application form a film to protect the surface against the atmospheric agents such as carbon dioxide, sulphur dioxide, chloride irons, etc the film can withstand up to 200% elongation thereby bridging cracks in the structure due to temperature variation etc. They are available in variety of colors and are highly durable

Manufacturer of 100% solid Elastomeric Polyurethane Coating as per ASTM D 16 Type V CLEAN TECH HPEC 1001(J) is a 100% Solid Two component, high build, solvent free ,Elastomeric Polyurethane coating as per ASTM D 16 Type V. Suitable for Application on both Concrete and Steel surfaces like Splash Zone Areas, Cooling Towers, Pipelines, Tanks, Mounded Bullets etc. CLEAN TECH HPEC 1001(J) is having high resistance to Sea water, Concentrated Acids , aqueous chemicals, solvents, industrial effluent and marine environments. The product is designed for use as a protective coating in corrosive environments such as for Power Plants, marine, refineries and various chemical industries.  

Rainguard / RAINGUARD is a flexible protective coating based on styrene – acrylic co-polymer for exterior use. Applied as a liquid; it cures to form a durable, protective, waterproof membrane. Advantages: Easy application -by roller, brush etc. Flexible – capable of bridging cracks. Protective – barrier against salts and atmospheric gases. High-build – masking imperfections in substrates. Waterproof – protects concrete from waterborne salts. U.V. stable – maintains its appearance.

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress. The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces. “IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048. Features and Benefits “IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality. Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor. Waterproofing coating system for new and existing surfaces. Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapour to escape, diffusing the pressure buildup. Highly effective for Positive & Negative sides of hydrostatic pressure Positive side water Impermeability : 5-7 Bar Negative side water impermeability: 1.5 Bar Effectively seals all existing cracks in the surface. Crack Bridging Capability : 1.5mm. Good resistance against UV and Infrared Rays. Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures. No additional dead load on the structure after application. The surface is ready for any subsequent application within 48 Hrs. Environment friendly coating, no VOC, improving the LEED score of the structure. Areas of Application   Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls. Overhead and underground water tanks. Swimming pools. Toilets & Bathrooms. Basements. Canals & dams etc.

Thermal Insulation Coatings is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is UV resistant.

Rain guard is an elastomeric polymer with the property of viscoelasticity (“elasticity”), generally having notably low young’s modulus and high yield strain compared with other materials.

Elastomeric Heat Resistant Coating, Waterproof Acrylic Sealant

Perma Eazee Coat is a milky white liquid which can be brush applied to most structural surfaces to make them waterproof. The coating is UV stable and highly flexible. Primary Uses : Perma Eazee Coat is used to Water proof all types of RCC surfaces such as Roofs chajjas, Parapet walls and External walls Asbestos cement sheet Roofs canals are waterproofed using scrim cloth at the junctions, Overlaps and j-bolts as re-inforcement as a Damp proof course applied under the first layer of bricks or blocks in masonry works Advantages : Eazee Coat is applied directly from the can Eazee Coat cures to give a permanently flexible and resilient surface resistant to a wide range of temperatures No cleaning solvents are required and can be washed off with water when it is still wet Single component and easily brush applied Can be used on wet surface and during rainy season Mechanical damages to the membrane can easily be repaired by spot application The membrane allows the concrete surface to breath Seamless application no joints are required. Packing : Perma Eazee Coat is supplied in 500 gm, 1.5 kg, 10kg, 15kg & 50 kg packs.

Elastomeric coatings Lotus Effect Elastomeric Heat Reflective Coating and Elastomeric Heat Reflective Coating. In addition to this, hereunder mentioned are the advantages and technical specifications of the Elastomeric Deck Coating. Heat reflective nano-tech barrier; Cooling load is reduced.

PRODUCT COMPOSITION: AWC-ROOF 300 is a water based system, with high solids, elastomeric coating utilizing the advanced acrylic technology. Premium quality acrylic resins are combined with reinforcing laminar pigments & incorporating an epoxy additive to increase the abrasion resistance properties of the film. It has Special spherical silica sand suspended in the emulsion to provide a fine uniform texture. The silica can be eliminated for projects requiring fine smooth surface. AWC-ROOF 300 has two variants one is for exposed application & the other one for covered application. HOW IT WORKS: AWC-ROOF 300 provides a durable colored topping for horizontal concrete and asphalt surfaces. Its main highlight is its satin sheen finish which gives the surface a very aesthetic & attractive look. With the aesthetic look advantage, the product also works as a weather resistant. It can be applied on any kind of vertical surfaces such as building exteriors, highway bridge structures, median barriers, retaining walls and noise abatement walls.   HIGHLIGHTS Water based system for easy application and cleanup Bonds tenaciously to concrete, masonry, stucco and asphalt surfaces Resists ultraviolet degradation for long term protection and color stability Provides durable, non-skid texture on interior or exterior surfaces Resists wear and abrasion through the incorporation of an epoxy additive Protects against asphalt degradation by sealing in the vital oils of the asphalt mix Helps prevent dusting and spalling of concrete surfaces Surfaces resist penetration from general soils, motor oils and gasoline for ease in cleaning No toxic fumes or objectionable odor. Meets all VOC requirements Technical Data Sheet Technical Data for AWC-Roof 300 MSDS for AWC-Roof 300 AWC-Roof 300 trifold