Kartar Valves Pvt Ltd Kapurthala Road, Jalandhar, Punjab

We offer swing check valves. Permits flow in one direction and closes automatically if the flow reverses strictly conforming to international standards available in integrally moulded rubber seating wafer type sleek design to allow maximum flow epoxy coating imparts finish and resistance

We offer strainers. Flanged ends stainless steel (aisi 304) brass perforated sheet screen is guided in body & bonnet drain plug is provided to remove the accumulated foreign particles fine finish and smooth contours to minimize pressure drop in the strainer large screening area makes the strainer efficient in performance

We offer Steam Valves. With Integral Stainless Steel (AISI 304) strainer Screwed Female ends with BSP Parallel Threads Tested to : 600 Psig (41.38 Kgcm²) Hyd. Suitable for : Steam upto 400 Psig (27.58 Kgcm²) Max. Working Temp : 425 C

 Features Screwed Female ends with BSP Parallel Threads Tested to : 300 Psig (20 Kg/cm² ) Hyd. Suitable for : Steam upto 150 Psig (10 Kg/cm² ) Max. Working Temp : 220ºC Sizes Available (in inches)1/2, 3/4, 1 Sizes Available (in mm)15, 20, 25

  With Integral Stainless Steel (AISI 304) strainer Screwed Female ends with BSP Parallel Threads Tested to : 600 Psig (41.38 Kg/cm²) Hyd. Suitable for : Steam upto 400 Psig (27.58 Kg/cm²) Max. Working Temp : 425 °C Sizes Available (in inches)½, 3/4, 1Sizes Available (in mm)15, 20, 25

Cast Iron Y-Type Strainer with Stainless Steel Screen (Screwed) Product Features   Screwed Female ends with BSP Taper Threads Tested to : 370 Psig (26kg/cm²) Hyd. Suitable for : Steam upto 185 Psig (13kg/cm²) Max. Working Temp : 220°C Sizes Available (in inches) 1/2, 3/4, 1, 1.1/4, 1.1/2, 2   Sizes Available (in mm) 15, 20, 25, 32, 40, 50   Kartar Valves Private Limited (Formerly M/s. Juneja Metal Works) Juneja Complex, Village Variana, Kapurthala Road Jalandhar - 144013, Punjab. INDIA   Phone : +91 181 2651500 Fax : +91 181 2651551 Email : info@kartarvalves.com   Copyright. Kartar Valves Private Limited. India Site Credits : Seigospace  

Generally in non rising stem design Available in outside yoke type rising stem Flanged ends Handwheel, cap or gear operated Available in PN10 & PN16 ISI Marked as per IS:14846 Available in CL125 as per BS:5163 Available in reselient seating as well as metal seating Application Water, Oil, Air, Fire fighting applications, Marine applications

Material : MS Sheet,Glass

Dimension : 450x450x250(WxLxD)mm

Features Bolted Cover with Renewable Stainless Steel (AISI -410) seats Flanged ends to : DIN-2533 RF (PN-16) Body tested to : 370 Psig (26 kg/cm²) Hyd. Seat & Back seat tested to: 230 Psig (16kg/cm²) Hyd. Suitable for : Steam upto 13kg/cm² Max. Working Temp : 220ºC Sizes Available (in inches)1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4 Sizes Available (in mm)15, 20, 25, 32, 40, 50, 65, 80, 100

We are offering resilient seated gate valves. Generally in non rising stem design available in outside yoke type rising stem flanged ends handwheel, cap or gear operated available in pn10 & pn16 isi marked as per is:14846 available in cl125 as per bs:5163 available in reselient seating as well as metal seating

Resilient Seated Gate Valve Product Features   Generally in non rising stem design Available in outside yoke type rising stem Flanged ends Handwheel, cap or gear operated Available in PN10 & PN16 ISI Marked as per IS:14846 Available in CL125 as per BS:5163 Available in reselient seating as well as metal seating Working & Test Pressure : Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150 Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0 Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2 Pneumatic Test (Mpa) Seat NA, NA, 0.7   1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI

ct Features     Reduce Bore, Bolted Bonnet, with all Stainless steel (A1SI-410) parts, Screwed Female NPT, With Socket Welded Ends     Body tested to : 3000 Psig (207 Kg/cm² ) Hyd.     Seat & Back Seat tested to : 2200 Psig (152 Kg/cm² ) Hyd.     Suitable for: Steam upto 138 Kg/cm²     Max. Working Temp : 425°C Sizes Available (in inches)½, 3/4, 1, 1.1/4, 1.1/2, 2 Sizes Available (in mm)15, 20, 25, 32, 40, 50     Reduce Bore, Bolted Bonnet, with all Stainless steel (A1SI-410) parts, Screwed Female NPT, With Socket Welded Ends     Body tested to : 3000 Psig (207 Kg/cm² ) Hyd.     Seat & Back Seat tested to : 2200 Psig (152 Kg/cm² ) Hyd.     Suitable for: Steam upto 138 Kg/cm²     Max. Working Temp : 425°C Sizes Available (in inches)½, 3/4, 1, 1.1/4, 1.1/2, 2 Sizes Available (in mm)15, 20, 25, 32, 40, 50 ct Features     Reduce Bore, Bolted Bonnet, with all Stainless steel (A1SI-410) parts, Screwed Female NPT, With Socket Welded Ends     Body tested to : 3000 Psig (207 Kg/cm² ) Hyd.     Seat & Back Seat tested to : 2200 Psig (152 Kg/cm² ) Hyd.     Suitable for: Steam upto 138 Kg/cm²     Max. Working Temp : 425°C Sizes Available (in inches)½, 3/4, 1, 1.1/4, 1.1/2, 2 Sizes Available (in mm)15, 20, 25, 32, 40, 50      

Cast Iron Horizontal Lift Check (Non Return) Valve Product Features   Bolted Cover with Renewable Stainless Steel (AISI-410) seats Flanged ends to : DIN -2533 RF PN-16 Body tested to : 370 Psig (26kg/cm² ) Hyd. Seat & Back seat tested to : 230 Psig (16kg/cm²) Hyd. Suitable for : Steam upto 13kg/cm² Max. Working Temp : 220°C Sizes Available (in inches) 1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4, 5, 6, 8   Sizes Available (in mm) 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200  

We offer Foot Valves. Permits flow in one direction and closes automatically if the flow reverses Strictly conforming to IS : 4038 Available in rubber seating Available in swing type & lift type design Swing type Screwed 15mm to 150mm Swing type Flanged 50mm to 300mm Lift type Screwed & Flanged 25mm to 100mm Valves upto 150mm have single circular door Valves above 150mm have two semi circular doors Valve designed for almost full flow rate

We offer fire hydrants. Hydrants are used in fire fighting installations to derive water from the mainlines. The outlet cap is screwed as per international standards test pressure (hydraulic) : body : 2.4 mpa seat : 1.6 mpa 1 bar = 0.1 mpa = 1.019 kgcm² = 14.50 psi

We offer fire fighting valves. Type single and double outlet. design standard is 5290 certification isi mark material available bronze (gun metal) and stainless steel. size single hydrant (k-901) : 80 mm inlet and 65 mm outlet double hydrant (k-901d) : 100 mm inlet and 2 x 65 mm outlets.

  Cast Iron Junction Steam Stop Valve, Right Angle Pattern Product Features   Bolted Bonnet, Outside Screw & Yoke type, Rising stem with back seat, Hand wheel operated, with all Stainless Steel (AISI -410) parts. Flanged ends to : DIN-86251/ BS-5152 RF (PN-16) Body tested to : 370 Psig (26kg/cm² ) Hyd. Suitable for : Steam upto 13kg/cm² Max. Working Temp: 220° C Sizes Available (in inches) 1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4   Sizes Available (in mm) 15, 20, 25, 32, 40, 50, 65, 80, 100

Cast Iron Globe Steam Stop Valve Product Features   With Renewable Stainless Steel seat & stem Bolted Bonnet, Outside Screw & Yoke type, Rising stem with back seat, Handwheel operated, with all Stainless Steel (AISI -410) parts Flanged ends to : DIN-2533 RF (PN-16) Body tested to : 370 Psig (26 kg/cm²) Hyd. Seat & Back seat tested to : 230 Psig (16kg/cm²) Hyd. Suitable for: Steam upto 13kg/cm² Max. Working Temp : 220°C Sizes Available (in inches) 1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4, 5, 6, 8   Sizes Available (in mm) 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200

We are offering butterfly valves. Dn 50 to dn 600, pn 10 & pn 16 temperature range 34°c to 150°c no part in contact with fluid except disc and liner self lubricated bushes neck flange according to iso:5211 direct actuator mountable design design reference is:13095 & bs:5155 neck height to accommodate insulation lugs on body make them suitable for using at the end of line suitable for actuator & gear mountings 100% leak tight design available in lever type and clutch type handles

We offer bronze plumbing valves. Screwed female ends to is : 554 bs : 21 iso : 7 single piece design for vertical lines only permits flow in one direction and closes automatically if the flow reverses strictly conforming to is : 778 class i. [isi] marked available in metal seating and rubber o ring seating available with and without spring

Brand Name : Kartar

Material : Bronze

Packaging Type : Golden

Finishing : Polished

End Connection : Screwed

We offer ball valves. 15mm to 100mm in flanged type 3pc design can be installed upto 200 degrees centigrade temperature & 35 bar pressure indigenously manufactured stainless steel mirror finished balls with 100% accuracy blowout proof stem gland packing can be replaced under pressure design reference is:9890 & ansi b16.1 mounting flange for actuator as per iso:5211 can also be provided available in cast iron, ductile, cast steel & stainless steel

We offer air valves. Releases air during charging and admits air during emptying of water main lines available in double orifice and single orifice single orifice are available from 15mm to 50mm in screwed and flanged type double orifice are available from 40mm to 150mm in flanged type only rubber coated timber balls are dynamically balanced to give trouble free working isolating valves if required are available optionally