Online pH Controller
Get Price Quote
1 Piece (MOQ)
The pH 600 - 1 series of pH Controller and Transmitter provides a reliable method of Monitoring, Controlling & Transmitting 4 - 20mA / RS 485 MODBUS RTU communication for Interfacing to PLC, Data logger, HMI, etc.,. This product is suitable to measure pH in water treatment, Electrolytic water cleaning, Chemical Industries, Food Process, Waste Water treatment, Textile Industries & Neutralization process, etc.,. This pH Controller & Transmitter can Measured using Industrial Combined pH Sensors, Temperature can be measured using temperature sensor. Features : Economical, Easy to Calibrate and Setup Wide range from -2 to 16 pH High Accuracy Programmable Auto / Manual Temperature Compensation Optional Isolated RS 485 communication with MODBUS RTU protocol Optional Galvanically Isolated 4 - 20mA Re Trans. Output Very High Input Impedance >10 Ohms User selectable Automatic and Manual calibration User selectable 2 or 3 point buffer calibration 2 Relay Outputs with Configurable individual H / L Setting with 6 relay status Optional audible inbuilt buzzer Output with front key reset Universal Supply Voltage 90 to 270V AC / DC Specifications : Display 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display Input Impedance >1012 Ohms Range -2 to 16 pH Resolution 0.01 pH Temperature sensor RTD - PT 100 (3 wire) Temp. Compensation Manual / Automatic (-20.0 to +150.0ºC) Electrode Input Combined Electrode with BNC Attachment Accuracy ± 0.01 pH ± 1 digit Set Point - 1 & 2 Two Set Point with 6 Relay Status Selectable Relay Output Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating Relay Hysterisis 0 to 5 pH (user adjustable)(only for High & Low control modes) Relay Cyclic delay 0 to 100 seconds (user adjustable)(only for High & Low control modes) Alarm Output(optional) inbuilt audible buzzer with front key reset Optional Re. Tx. output Galvanically Isolated 4 - 20 mA Optional Comm. output Isolated RS 485 Comm. Protocol MODBUS RTU Operating Environment -10 to 50ºC / 10 to 95 % RH Non Condensing Power Supply 90 to 270V AC / DC 50Hz Dimension 96 x 96 x 85 mm. Cutout Dimension 92 x 92 mm Weight 500 grams (Approx.)
Aquasol Online Ph/Orp Controller
23,640 Per Piece
1 Piece (MOQ)
PH / ORP are the primary controlling parameters for any process used in a wide variety of industries ranging from water chemical pharmaceutical food processing etc. Our online controllers are used to monitors these process parameters continuously and helps to take corrective action with its relay & current outputs. These reliable accurate and robust meters are designed with a compact housing which fits in standard industry panel. Also these meters can be easily calibrated and can display multiple parameters at the same time. Features: Microprocessor based for fast and accurate measurements. Weatherproof Case and Compact Design (IP 54) Programmable Relay & 4 to 20mA Outputs with user defined Hysteresis Programmable High & Low Alarm functions 1/4 DIN Fitting on the Standard Industry Panel Galvanic separation between Input Output & Supply Auto Buffer Adjustment with Automatic Temperature Compensation Large Backlight LCD Display
Best Deals from PH Controllers
Microprocessor pH Controller
12,000 Per Piece
1 Piece (MOQ)
pH Controller
7,500 Per Piece
Online pH Controller
Get Price Quote
We are offering online ph controller.
Ph Indicator Controller
7,500 Per Piece
Digital pH Controller
7,500 - 8,500 Per unit
ph controllers
Get Price Quote
Multi parameter display Simultaneously shows – pH, Temp, mV & Relay Status on Single screen, Advanced Embedded Microcontroller based design, Isolated 4 to 20 mA retransmission output, Two Programmable isolated relay outputs.
ph controllers
Get Price Quote
Flameproof and Std. pH,TDS and Conductivity Controller
5,000 Per Piece
To keep up with the set international standards, we have incorporated the latest machines and cutting-edge technology to sternly examine the material used for production. We have voluminous warehouse that has loading docks to load and unload goods, well-maintained by the professionals. Our completely automated warehouse is sternly supervised to check that products are kept carefully. We deal in following online meters & Spares: 1. Online pH Indicator cum Controller 2. Online TDS Indicator cum Controller 3. Online Conductivity Indicator cum Controller 4. Online ORP Indicator cum Controller 5. Online pH sensors and electrodes 6. Online TDS & Cond. sensors and electrodes. 7. Calibration Buffer Solutions.
pH Controller
Get Price Quote
Widely used for online pH monitoring in environmental protection water treatment, pure water treatment, industrial process, agricultural industry etc. Range : pH: 0.00~14.00, temp 0.0~99.9 (temp compensation NTC10K) Buffer solution 10.00; 9.18; 7.00; 6.86; 4.00; 4.01 Temp compensation range 0~50°C (with 25°C as standard) manual and automatic temperature compensation. 4-20mA isolated, fully adjustable, reversible 4-20mA output, instrument transmitter mode. Control contact: electrical contact double relay SPST-NO, return mode; load capacity AC220V110V 2A(MAX); DC24V 2A(MAX). Power consumption ＜3w Power supply AC220v (AC110V, DC24V can be selected) Working environment Temperature：0 ~ 50°C ；Humidity：≤85% RH (none condensation) Outline dimension: 48mm × 96mm × 80mm (H×W×D)
Digital pH Controller
Get Price Quote
Our company is recognized as one of the preeminent Exporters and Suppliers of Digital pH Controller. We are associated with certified manufacturers who make use of optimum quality components such as metal, plastics, wire etc. with adherence to set industrial standards and norms. It is provided in quality assured packaging material that prevents any kind of damage at the time of delivery. We can process retail as well as bulk orders. Features : Accurate pH display with calibration facility on front panel Independent 2 Set Point controller LED display Isolated Tx. Output for remote monitoring Pleasing aesthetics with membrane selector switches Auto Temp Compensation using PT100 Low power consuming LED display. Precision indication of pH (0-14.00). Auto Temperature Compensation. Front Panel Calibration. Available with 4-20 mA ISOLATED Output.
pH Control Systems
Get Price Quote
We are Gujarat; India based Manufacturer & Exporter of pH Control Systems that are the perfect outcome of premium raw material and innovative manufacturing techniques. Available with us in different grades and specifications, our systems have no match in the market. Apart from this, we can easily furnish tailored requirements of the buyers within the given frame of time. Buyers are free to place orders, safe and timely deliveries will be at the right place. Details Normally ph value is from 1 -14 Soil pH mainly direct effect on plant growth and life, It affects availability of all plant nutrients. pH below 7 is Acidic and Ph above 7 is Alkline pH lower 7 is best liquid solution for ph control
ECO-pH Controller
Get Price Quote
pH Controller
Get Price Quote
Approx. Price: Rs 14,000 Unit Specifications: Precision: 0.05pH, ± 0.3ºC Automatic temperature compensation: 0~100 ºC(pH) Measuring Range: 0-14pH
Plants Ph Controller
1,400 Per 1000 ml
100 Litre (MOQ)
pH Controller with Electrode
25,000 - 45,000 Per Piece
ERMA Digital pH controller
11,000 Per Piece
pH Controller
Get Price Quote
Libratherm offers PID Controller for ON LINE monitoring and controlling of pH or ORP or Conductivity value in the continuous process. The controller can be interfaced with the pH / ORP / Conductivity sensor to display the pH value in the range of 0.00 pH to 14.00 pH or ORP /Conductivity value in mV.Since the signal given by the pH electrode varies with the temperature, automatic temperature compensation (ATC) facility is in-built in the instrument to read pH value more accurately without manual adjustments. This feature is available in model PD-5000. The controller gives direct / reverse dc pulse PID output with settable dead band for the metering or dosing pump to control quantity of both acid and base levels in the chemical process, water purification or effluent treatment plants. The normal pulse rate is 100 pulses per minute. The dual direct / reverse 4 â 20 mA is also available for actuator accepting direct analog signals. The retransmission output of (4-20)mA proportional to pH/ORP level is also made available for the recording purpose. The controller is available in both standard and weather proof enclosure.For interfacing low level signals from ORP/pH/Conductivity sensors, Libratherm offers signal convertor/isolator module for generating proportional (4-20)mA signal for long distance transmission of the measured value.
Spray-Master A Ph Controller
Get Price Quote
We deals in Spray Master.
pH Control Plant
Get Price Quote
Sigma'C Process Engineering has a good expertise in design & supply of a good range of pH control/correction system which is energy efficient & cost effective. pH Adjustment Systems, pH Neutralization Systems, pH correction plant and Boiler blowdown pH neutralization plant design and supply is our specialty. We supply Skid Mounted / Modular Design which is Completely Automated. We supply a completely Fabricated and Tested plant to clients before shipping.
Automatic Ph Controllers
Get Price Quote
We are offering automatic ph controllers. The removal of excess acidity or alkalinity by a chemical agent is called neutralization. Industrial waters that were exposed to extremely high or low ph values require a neutralization process before they can be sent to a biological treatment or the environment. The equipments used for the ph correction are the ph meter and the dosing pumps. Depends on the inflow ph it will pump acid/lime to neutralize the ph.
Aquatic Remedies PH reducer
Get Price Quote
Reduce and stabilize pH. Safe to use with all aquatic animals. do not increase more than 0.2 pH each time of application
pH Controller
Get Price Quote
We are offering ph controller.we are involved in offering our clients ph controller. The phc-065 is an industrial on-line analysis and monitoring instrument with a relay output to act as a “controller”. The instrument is supplied with various software functions. Ph controller is a compact and accurate instrument with strong anti-interference capability, automatic temperature compensation and ph operation compensation. The instrument is characteristic of its easy installation and low maintenance. The ph controller is provided with the ph sensor, having a measurement range of 0-14ph. functions • back ground lcd digital display. • direct reading and accurate control with micro chip for data processing • automatic or manual three-point calibration, which improves the measurement accuracy of the instrument. • strong anti-interference capability and automatically reset in case of power off. technical specifications:- 1. Ph measurement range: 0 to 14ph 2. Resolution: 0.01 ph 3. Accuracy : ±0.1 ph 4. Electrode pressure resistance: 0 to 0.6mpa 5. Power supply: ac 220v±10% 50hz 6. Distance limit of measurement:
Wall Mount pH Differential Controller
Get Price Quote
Built-in non-volatile memory to ensure that calibration and other information are not erased if power supply fails. :: Menu-driven program that simplifies set-up. :: Automatic temperature compensation (ATC) :: Manual temperature compensation setting without the ATC probe, with independent setting for calibration and process temperature. :: Two galvanically isolated current outputs 04...20mA. :: Two switching contacts as set-point relays. :: 0 to 2000 seconds time delay adjustment on all relays – minimizes false alarms :: Separately adjustable high and low set-point hysteresis (dead bands) prevent chattering of relays around the set points. :: Three control modes: limit controller, P controller and PI controller (PPI controller as pulse length or pulse frequency). :: Large dual display LCD for easy reading with clear multiple annunciators, alarm status, operational and error messages. :: Separate alarm relay that alerts user to set point limits exceeded for a certain time and if the NTC300 thermistor wires are broken or disconnected during the ATC function
pH Controller
14,600 Per Piece
Online pH Controller
Get Price Quote
We are identified as one of eminent Online pH Controller Manufacturers, Exporters, and Suppliers in India. Our Online pH Controller is made from high grade raw materials that assure its smooth functioning. Moreover, our Online pH Controller is highly efficient and durable. It is available at the most discounted price in the industry. Features Field mountable IP-65 enclosure Local LED Display Compatible for any pH Electrode Economical Simple to operate Compact & Rugged Design Automatic / Manual Dosing Mode Specifications Range : 0.00 to 14.00 pHResolution : 0.01pH Accuracy : ±0.02pH ±1 digit (Without Electrode)Operating temp : 0 to 50o COperating Humidity :10 to 90% RH BL-983313, 20 & 22 Mini Conductivity Controllers
Ph-2000 Series Torque Controller
Get Price Quote
Our Ph-2000 Series Torque Controller is Designed with Microprocessor Control, Built in Printer, and Computer Connectivity to Download and Study Expansion Values. Moreover, the Ph-2000 Series Torque Controller Has Ability to Generate 10 Report Formats for Quality Control of Expanded Joints and It Operates with a Remote Control.
pH Controller
Get Price Quote
ph controllers
Get Price Quote
pH controllers automatically checks and fine tunes the pH levels of a solution. It helps in balancing the acidic as well as alkalinity levels, keeping a solution completely neutral. The pH Controller are hugely varied and their design and configuration depends upon various factors such as acid or base strength, flow, method of adding the neutralizing agent, variability of strength, accuracy of control, etc.
Cities
