AMF Panel Dealers in Kolkata

Our company is a wide manufacturer of AMF (Auto main failures) panels,which are basically incorporated engine from start to end and changeover of the power source.The panels consists of electronic controller,relays and contactor logic.These panels can be created according to the customer’s specific needs.These panels can be found with several functions and timers that increase their functioning capacity. SPECIFICATION AC Voltage: 0-690Volt AC Rated Operator Voltage: 110V(±10%), 220V(±10%), 415V(±10%) AC System: 3-Phase, 3 or 4 wire, 50Hz Withstand voltage: 8-KV for 1 Sec Rated Current: 100 to 6300Amp Fault level: 50KA for 1 Sec Ambient Temperature: 45°C Insulation Voltage: 1000Volt Degree of protection: IP-42, 54, 67 Busbar: AL/CU as per client requirement Current Monitoring: Avalible Type Test: Short Circuit with Stand temperature rise with stand & Degree of Protection Cable Entry: Top or Bottom option Panel Cote: 7 tank Powder Coated Paint/As per requirement Paint: RAL9002/As per requirement Panel Mounting: Floor/Ground Mounted, Wall  Mount, Mounted on Angle Frame Reff.Standard: IS:8623

We are engaged in manufacturing & supplying of DG Synchronization Panel. Our team of skilled technicians and expert designers manufactures the DG Synchronization Panel using hi-tech tools and equipments and superior grade material. The DG Synchronization Panel offered by us are demanded by renowned organizations because of various features like accurate designing, smooth functioning, efficient performance, proper finishing and long service life. Highlights : Two speed motor control panel : with trip indication, short circuit protectionFurnace heat control panel : with temperature controller

16 swg gage sheet with All the internal product are branded L&T , RR cable, ETC . with power cotet paint only supply . instalation and termination charges extra .

We are a well-known manufacturer, exporter, supplier and service provider of amf panels based in kolkata, west bengal. The automatic mains failure panels are used to changeover from mains to generator during a power outage. The panels are made from rittal enclosures and provide constant monitoring of three-phase current. It has an alarm in case of failure to start. An emergency stop and generator stop with delayed timing is also provided.   Applications : amf panel & battery chargers are used where the generators are installed between main ac and load. it will start and stop the generator automatically and changeover the ebgenerator lines.   Salient features : our amf panels panels are made of fully rittal enclosures. provides continues monitoring of three phases. automatic shut down during dg fault. automanual selector is available. generator stop with delay of timing possible. hooter alarm annunciation for fail to start. emergency stop is available.

Avail from us AMF Panel that provides emergency power solutions in the situation of major power failure. AMF Panel manufactured by us is high on demand in the market due to its quality and flawless performance. We provide AMF Panel to the customers as per their requirements.

About Auto Mains Failure Panel (AMF): Auto Mains Failure (AMF) panel starts Generating set when mains fails then your load is transferred to generator\'s supply. When Mains supply resumes, it transfers load to Mains supply again and shut off the Generator, everything automatically.AMF panel contains set of relays for automatic start stop of generator, set of electrically operated breakers (Contactors or Air Circuit Breaker depending upon rating of Generator), safety devices for protecting of your Generator from over load and short circuit protection, meters to observe electrical parameters (Voltage, Current, Wattage Energy etc.) and indicating lights to check status of generator and Mains supplies.Silent Features :Fully automatic synchronizing panels operated by microprocessor based relays.AMF, Auto synchronizing, Manual synchronizing, Auto load sharing, Active & Reactive power management with protection such as U/V, O/V, E/F, O/C IDMT, reverse power etc.load unbalance metering such as Ammeter, Voltmeter, Hz meter, KW, PF, KWH, Double Volt, Double Hz, Synchrony-scope.Team of experts to provide commencing / site services

This is a Module with Generator monitoring, protection and start facilities. Operation of the module is operated from the front panel with STOP, MANUAL and AUTO positions. »When the AC mains supply returns to within limits, the module will transfer load back to the mains. The engine will be instructed to stop after a cool-down period. The module’s microprocessor provides a comprehensive function. AMF control System provides:- • Consistent Power Supply to the load. • Smooth Start / Stop Sequence. • Audio / Visual indication of various fault conditions. • Auto / Manual modes of operations. »AMF control System provides:- • Range from 7.5 KVA to 3000 KVA. • Logic Panels with normal source or with standby DG source. • Basic protection under / over voltage, under / over frequency. • Provision with future synchronising. • Metering (Voltage, Ammeter, Frequency, KWH) & Battery charger unit. • Modbus communication facility. • DG Breaker & mains Breaker (Optional).

We manufacture and supply AMF (Auto Means Failure) Control Panel and Synchronizing Panel, as per the specific requirements of the clients. These panels are used for synchronizing and controlling power supply in various commercial complexes and industries. Made using quality components, these panels are also used for power systems, which required synchronization of one or more generator breakers. Apart from this, our offered panels perform efficiently as these are compact in design. On the request of the clients, we customized these panels (both automatic and manual modes) to meet client-specific requirements.

We provide Auto Synchronizing Panel, which is basically used for the synchronization of generators. Two or three generators can run parallel t each other while maintaining the same electrical parameters for two/three DGs. The Auto Synchronizing Panels feature numerous relays etc. for proper functioning and protection of the generators. Power Specifications 415 V. 3 Phase 4W. 50 HzAC supply system Characteristics Rugged constructionHigh quality electrical components usedIndoor installation typeCompact structureMinimum maintenance Apt for Industrial usageMarketplacesShopping MallsHospitals

Auto mains failure (AMF) Panels is meant for controlling DG START STOP sequence in accordance to the availability of utility power supply. We design & manufacture the AMF panels for various capacity & different make of Diesel EA set.

We are a well-known AMF Panels Manufacturer and Supplier, based in West Bengal. We are engaged in bringing forth top quality AMF Panels that are made with the finest components obtained from reliable vendors. The offered AMF Panels are in compliance with the highest quality standards. Avail premium AMF Panels from us at very reasonable prices. Details : Sample Availability : Yes Supplier Product Code : PR-007

We manufacture and supply AMF (Auto Means Failure) Control Panel and Synchronizing Panel, as per the specific requirements of the clients. These panels are used for synchronizing and controlling power supply in various commercial complexes and industries. Made using quality components, these panels are also used for power systems, which required synchronization of one or more generator breakers. Apart from this, our offered panels perform efficiently as these are compact in design. On the request of the clients, we customized these panels (both automatic and manual modes) to meet client-specific requirements.    Provided with:    * Control switch* Voltmeter* Digital meter* Facilitate generator and bus measurement  Utility Areas:   * Electronic equipment* Semiconductors* Data synchronization* Engineering systems  

Complete with AMF Controller / Relay Based Panel capable to change over the supply from Mains to DG with necessary protections. We are Gujarat’s leading manufacturer and supply best qualityElectrical AMF Panelsdue to our vast experience and knowledge of this domain. Precisely engineered in accordance with the industry set standards, these AMF control panels are used for the purpose of supplying emergency power in case of main power failure. Offered panels are available with us at industry leading prices. AMF Panel is one of our product which can be used for automatic change over between Mains and DG supply. We offer AMF Panel with necessary switchgears like ACB / MCCB, Contactors, AMF Relay, AC MF Meters, DC Meters, Battery Charges etc and necessary protections. By installing this panel one can get power from DG at the time of failure of Mains and it will shut off the DG when Mains restores. As special features we can provide engine safety features like Low Lub Oil, Oil Temp. High, Charge Low etc.Features: High functionality Low cost of maintenance Smooth finish

AMF Panel, Electric Control Panel, LT Fedder Piller Box, Fire Fighting Pane

Automatic Mains Failure Control Panels, Burner Control Management Panel

Synchronization Panel, Pressure Vessel, Steel Junction Bo

AMF Panels, AC Drive > MFDDTB3A2 (5KW), VFD, DC Drives, APFC Pane

AMF Control Panel, Control Panels, Electrical Penal Board, PCC, MC

AMF Panels, PLC Panel, MCC Panel, Distribution Board, Control Panel Boar

Synchronising Panel, Auto Main Failure Panel, Outdoor Kiosk Ht Vcb Pane

AMF Panels, Transformers, PCC Panels, APFC Panels, AC Controller

DG Synchronization Panel, Power Electronic Machinery, Feeder Pilla

AMF Panels, Measuring Equipment, Control Relays, Digital Panel Meter