Electric Cables Dealers in Bbd Bag, Kolkata

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us   Products|PTFE Insulated Heat Proof Cables PTFE INSULATED HEAT PROOF CABLESPTFE (Poly Tetra Fluoro Ethylene) is a polymer material, well-known these days. It has outstanding electrical, thermal and chemical properties.The operating temperature of PTFE is from - 65°C to 200°C for silver plated and - 65°C to 60°C for Nickel plated wires. Type ET (250V AC RMS), Type E (600V AC, RMS)and Type EE (1000V AC RMS) are manufactured strictly as per the specification of JSS 51004.ADVANTAGES: 1. Excellent thermal stability - suitable for use for- 65"C to 260"C. (2) Suitable for very wide frequency range (D.C. to above 10,000MHz) over wide temperature range. (3) Fire (flame) proof. (4) Inert to practically all chemicals even at elevated temperatures. (5) Smaller size, lighter weight and much higher reliability. (6) Lowest dielectric constant (2.1) dissipation factor (below .003) and highest volume and surface resistivities (in Teraohms). (7) Flex life - Excellent. (8) Non-contaminating. Non-toxic and bio-compatible. (9) Corona Resistance-Fair. (10) Cold-flow and cut through resistance - Fair, (good mechanical strength). (11) Resistance to ultra violet radiation and stress cracking-Excellent. (12) Soldering iron resistant and suitable for high density wiring. (13) Resistant to fungus and mould growth.APPLICATIONS: (1) Computers. (2) Refrigeration equipment. (3) Electronic test equipment (mobile and man pack wireless sets). (5) Electronic equipment for aircraft, Radar, navigation (6) Flight simulators. (7) Electronic control equipment for atomic energy satellite launching, ground control, reactor and process control, telephone exchange, lifts. (8) High performance motors, transformers and rectifiers (9) Temperature control valves; Furnace and oven wiring. (10) Load Cells and pressure transducers. (11) lnfra Red sensing equipments. (12) Air field lighting equipment. (13) Thermocouple and heat sensing leads. (14) Control panel wiring.

In our online hot dip galvanising plant, we also producing Galvanised Steel Formed Wire also known as Galvanised Steel Flat Cable Armour Wire, which is primarily used by the Power Cable manufacturers and Telephone Cable manufacturers for armouring of cables. Manufacturing is under the license of Bureau of Indian Standards (BIS) All physical, mechanical and chemical tests are carried out by expert quality control work force ensuring superior quality of the products. Packing is done with utmost care to ensure no damages to the surfaces or the edges of the strips. Packing is mainly done by plastic wraps or else specifically specified by our customers. Size :: 4.0 X 0.80 mm Size :: 6.1 X 1.40 mm

Product area application Alternators, Traction Motors, Electro Magnets, Alternators Product Range Cross Section area : 4 mm2 to 70 mm2 Packing : 50 Kgs to 200 Kgs

Elastomeric Cables are used in various sectors due to their excellent properties with standing harsh operating environments. These cables find applications in almost every sector of the economy like railways, wind farms, industrial infrastructure, petrochemical, Etc. Nishant has the capability to manufacture cables of varied elastomeric compounds like VIRTRS, EPDM, Silicone, CSP, PCP, NBR, EVA, Fluoroelastomers, Etc.

Multicore Industrial Cables, which we offer, are manufactured using the best-grade materials that are sourced from reliable Vendors in the domain. We are among the dependable Manufacturers, Suppliers and Exporters of Multicore Industrial Cables, based in Kolkata- West Bengal. These Multicore Industrial Cables at the market leading rates.   Note : Prices are subject to change due to LME prices and Dollar fluctuations, please inquire the latest prices.

Trend is moving towards using ABC cables in place of underground cable in power distribution network. ABC are much lighter, economically feasible and higher current rating of at least 10 % more than underground armoured cables. ABC are either Low Tension or High Tension Grade.ABC aluminium conductors are mainly XLPE insulated and each core are twisted round a aluminium alloy bare stranded conductors called MESSENGER. The Messenger conductor facilitates suspension of the cable on hooks and clamps in street lighting poles.   Hooking and pilferage of power is prevented. There is also vast advantage of continuous power supply in the event of storms and blizzards.Installation of AB Cable is simpler and much cheaper than the underground cables. Cable accessories are also cheap.The installation time is much less. ABC Cables are manufactured as per Indian Standards and Overseas Specification.    

Our organization has gained vast expertise in offering a superior range of Aluminum Armoured Cables to our clients. These are fabricated from the purest quality of aluminum obtained from trusted sources in the industry. Our range of Aluminum cables is coated with a layer of insulation to prevent a short circuit when it is being wound into coils. These wires offer excellent resistance to heat shocks and is thereby suitable for high-speed winding. Technical Specification: 1.1 KV aluminum conductor PVC insulated inner sheathed armoured PAV Sheathed Cables Conforming to ISI:1554

Sinha Electric is the foremost supplier of Copper Armoured Cables in Kolkata, it can availed by us in best price, our principal company manufactured this item with quality assured raw material such as bare copper and tinned copper at our client’s end. We are a quality oriented organization, all these products comply with international quality standards. To ensure their quality, flawlessness and durability, we procured these products from the authentic and reliable vendors of the market. These cables are available in variegated length as well as offer greater resistance to the austere weather conditions.

We are offering armoured pvc control cable. Construction: solid stranded annealed copper conductor & tinned bare general purpose hr pvc insulation cores laid up (filled if needed) frls general purpose pvc inner sheath

We supply low tension cables according to national and international standards and to individual specifications for our customers. In the 0.65 kv - 1.1 kv range, the most commonly required cables are always in stock or production, guaranteeing availability. Cables with aluminium or copper conductors

Manufactured by using ec grade aluminium wire rod, All Aluminium Conductor is highly acclaimed among core customer for its high strength and optimum current carrying capacity. It is adopted by many clients for distribution and transmission lines.

We engineer high performance glass braided copper cables available in different range to meet the client's specifications. Our vast stock capacity ensures cost effective solution while maintaining the quality. Our range of glass braided copper cables are also available with BDV of 6 KV are used in coil winding of transformers & motors. Design features: Dielectric Strength Moisture absorption and dimensional stability Ease of fabrication and maintaining tolerances

Aerial Bunched Cable (ABC) Is A Very Novel Concept For Overhead Power Distribution. ABC Provides Higher Safety And Reliability Compared To Bare Conductor Overhead Distribution System. The Other Advanctages Are Lower Power Losses And System Economy By Reducing Installation, Maintenance And Operation Cost. This System Is Ideal For Rural Distribution And Specially Suitable In Difficult Terrains Like Hilly Areas, Forest And Coastal Areas Etc. ABC Is Also Considered As A Better Choice For Power Distribution In Densely Populated Areas Where Laying Of Underground Cable Is Either Difficult Or Extremely Expensive. This Is Attributed By Narrow Lanes And By-lanes Of Congested Urban Areas. Needless To Mention That ABC Is A Better Choice Due To The Flexibility Of Re-routing Demand, Should There Be Any Changes In Urban Development Plan.

Copper / Aluminium conductor XLPE Insulated, unarmoured / Armoured, HR- PVC, FRLS sheathed cables IS : 7098/P-1 1c × 1000 SQ.MM 4c × 400 SQ.MM 61C × 2.5 SQ.MM   Copper / Aluminium conductor Type-A PVC insulated (General purpose - 70C unarmored /armored, ST-1 PVC sheathed cables IS : 1554/P-1 1c × 1000 SQ.MM4c × 400SQ.MM 61c × 2.5SQ.MM   Copper / Aluminium conductor HR-PVC insulated, unarmoured/armored, ST-1/ST-2 FRLS PVC sheathed cables IS : 1554/P-1 4c × 400 SQ.MM61c × 25SQ.MM   Copper / Aluminum conductor Type A/HR-PVC insulated, unarmored/armored, ST-1/ST-2, FRLS PVC Sheathed Cables IS : 1554/P-1 1c × 1000 SQ.MM4c × 400 SQ.MM61c × 2.5 SQ.MM

We are offering elevator flat cable. 1. 0.5 sq mm1core, round 2. 4 sq mm 1core round 3. Digital cable, 0.25, 12c, flat 4. 0.5 sq mm 4core, flat, traveling 5. 0.5,sq mm 12c, flat, travelling 6. 0.75,4core, flat, travelling 7.0.75,12c, flat, travelling 8.0.75,16c, flat, travelling.

Control Cables is used in Power & Switching stations, Control Rooms, local distribution systems, Control Panels, industrial plants, commercial buildings, Cement , Steel, Refineries & Chemical plants.