Speed Reducers Dealers in Kota (5 products available)

Agnee shaft mounted speed reducer is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kw. features • model in 7 sizes from b to h with nominal gear ratios of 5:1, 13:1 and 20:1 • extended 2 year warranty (optional). • mounts direct onto the driven shaft: • no alignment problems. • no shaft couplings. • flexible motor mounted in a convenient position. • no expensive adjustable base plate is required for the motor, as v-belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the 'v' -belts. • quick and easy speed changing via belt drive. • final output speed can be very accurately obtained by adjusting the 'v' -belt' drive ratio. • high efficiency by using helical gears o single - 98% efficiency. O double - 96% efficiency. • anti-run back device can easily be fitted on site. • most shaft mounted speed reducers use "6000" series i. S. O. Plan taper roller bearings, stocked around the world. • double lip type oil seals used throughout. • shaft mount gear boxes can be mounted in any position. • proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. • long established and proven drive system. • wide range of variation available: • shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. • ultra compact when compared to other designs. • agnee offers a full comprehensive repair facility including spares availability shaft mounted speed reducer are used in road construction machinery, cement industry, mining industries, material handling equipment’s, crushing plants, conveyor system, and power transmission equipments.

• Model in 7 sizes from B to H with nominal gear ratios of 5:1, 13:1 and 20:1 • Extended 2 year warranty (optional). • Mounts direct onto the driven shaft: • No alignment problems. • No shaft couplings. • Flexible motor mounted in a convenient position. • No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. • Quick and easy speed changing via belt drive. • Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio. • High efficiency by using helical gears o Single - 98% efficiency. o Double - 96% efficiency. • Anti-run back device can easily be fitted on site. • Most shaft mounted speed reducers use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. • Double lip type oil seals used throughout. • Shaft Mount Gear boxes can be mounted in any position. • Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. • Long established and proven drive system. • Wide range of variation available: • Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. • Ultra compact when compared to other designs. • AGNEE offers a full comprehensive repair facility including spares availability

The AGNEE Worm Speed Reducers (gearbox) have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made  to suit individual requirement or as per specifications provided. They are available in   Vast range of Models suit every individual's requirement.         Available Models are:               30, 40, 50, 60, 75, 85 (Adaptable Worm Gearboxes)               75, 100, 125, 150, 175, 200, 250 (Vertical Worm Gearbox)               75, 100, 125, 150, 175, 200, 250, 300, 350, 430 (Horizontal Worm Gearbox) ·         Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice ·         Center Distances from 40 mm to 400 mm ·         In Single or Double Stage Reductions ·         Ratios from 5:1 to 4900:1 ·         Also made as per customer's specifications, Drawing, requirements ·         Overhauling of Old Gear Boxes also undertaken, Early delivery schedules  

AGNEE Shaft Mounted Speed Reducer (SMSR) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW. haft Mounted Speed Reducers (SMSR) are ultra compact when compared to other designs.     Send Enquiry In Stock SMSR Gearboxes AGNEE Shaft Mounted Speed Reducer (SMSR) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW.   Features Model in 7 sizes B, C, D, E, F, G, H with nominal gear ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty (optional). Mounts direct onto the driven shaft: No alignment problems. No shaft couplings. Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt     tensioning is done by the use of a torque arm which can be simply shortened or     extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt'     drive ratio. High efficiency by using helical gears Single - 98% efficiency. Double - 96% efficiency. Anti-run back device can easily be fitted on site. Most shaft mounted speed reducers (SMSR) use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. Double lip type oil seals used throughout in shaft mounted gearbox. Shaft Mount Gear boxes can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. Long established and proven drive system. Wide range of variation available: Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Shaft Mounted Speed Reducers (SMSR) are ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability for shaft mounted gearboxes.

agnee shaft mounted speed reducer (smsr) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kw. features model in 7 sizes b,c,d,e,f,g,h with nominal gear ratios of 5:1, 13:1 and 20:1 extended 2 year warranty (optional). mounts direct onto the driven shaft: no alignment problems. no shaft couplings. flexible motor mounted in a convenient position. no expensive adjustable base plate is required for the motor, as v-belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the ‘v’ -belts. smsr video presentation to illustrate internal assembly of gear, shaft, bearings, oil seals, oil level indicator of agnee smsr gearboxes..