Process Indicator Dealers

This is a DIN Rail mount process Indicator. It has 0.30” 4-digit 7-segment dual display, LEDs for relay and serial communication status indication, 4-keys keypad for field configuration. Unit also has options for two alarm relays, serial communication: RS232 or RS-485 and two channels of 4-20 ma isolated analog outputs. MICROCONTROLLER BASED Accepts Analog Input: 0/4.0-20.0m, 0/1-5 V, Pulse Input Four Keys membrane Like Keypad 8-Digit Numeric 0.30” Red LED display for Process Variable & Set Point Operating at 100-263VAC/24VDC Transmitter Power supply: +24VDC/50mA Programmable parameters: Zero, Full scale, Decimal position etc.. Non-volatile Memory for storing configuration parameters Input & Output calibration thro’ software Options: Analog Output: two Channels: 4.0-20.0mA Isolated (Linear Proportional to Indication) Two Relays (2A/230VAC) for Alarm Communication: RS232 or RS-485 (2-wire), MODBUS protocol Mechanical Data : Mounting: DIN rail/Wall mounting Outer dimension: 70 mm(W) x 75 mm(H) x 110 mm(D) Enclosure: Normal Application : Field mountable isolator: single channel or dual channel Process Indicator Analog to serial converter Alarm generator

Micro Controller based 24 bit Resolution AD Converter Inputs ±20mA, ±56mV, ±10V User Scalable Display Range from -199999 to +199999 (±2 Lakhs counts) Resolution 0.00001 to 1 (user selectable) Programmable input range settingeg: 4-20mA, 0-5V, 0-40mV, -10 to 20mV etc.) 24 DC Power Supply for Remote transmitter excitation

DPC 965M is 7 segment LED, 5 digit process value with 1/2 inch Display Size.It is intended to be used for indication and control application. Digital Indicator Controller accepts commonly used signal in process industry or 0 to 10VDC or RTD Pt100. In case of other inputs we can provide appropriate converters. Serial port RS 485 with MODBUS RTU protocol gives the user facility to connect the unit on all standard SCADA and DCS. 4-20mA Retransmission output for remote display or PLC can be provided for 4-20mA input type. 2 / 4 relays outputs are available. Ideal for SCADA applications.  

Universal Input Strain gauge input Custom linearisation Differential Measurement Four alarm setpoints Multiple alarms on a single output Digital communications Analogue retransmission Transducer supply Transmitter supply

Special features : high resolution 3½ digit display. Large 220.mm display. In-built transmitter power supply. Adjustable range (zero & span). Selectable decimal point. Panel mounting or wall mounting option.

Universal or Fixed Input RTD, Thermocouple, Current & Voltage Front Key Calibration Red or Green Display Color Engineering Unit Labels Insertion Control Action - ON/OFF Control Action - ON/OFF The design of Universal Process Controller is characterized by high reliability and precision, electrical noise and EMI immunity. These features make them ideal for industrial applications in Instrumentation and Process Control. They accept fixed or universal input that can be mA DC, Volts DC, mV DC, thermocouples, RTD or pulse input. The controllers are projected on modularity and flexibility concepts, having single or dual relay output. It can be used for ON/OFF control application where the control action is reverse for heating and direct for cooling. The controller is calibrated for all the basic input and the calibration is not required to be changed if the input type is changed. However if re calibration is required due to any error then calibration can be done through keyboard.

to furnish the exact needs and necessities of our customers, we are readily betrothed in bringing forth a broad gamut of process indicator. The inputs used in their development process are of exceptional quality standards and are well examined before getting used. Also, the complete spectrum of products offered is checked sternly before getting shipped to our customers.specifications: input signal range: 0 - 1v, 0 - 2v, 0 - 10v, 4 - 20 ma from transmitter supply voltage: 24v ac/dc to 240v ac/dc display: respective parameters with resolution set point: settable through keypad output: buffered same as i/p, serial o/p for pc, control o/p if setting is done. box: 96 x 96 x 150, 96 x 192 x 200 or suitable

Process indicating systems for institutes, industries ,mapping , heat treatment furnace , oven, cooling chamber , molding , packing machine , ac , refrigerator , clean room environment , online pressure , humidity etc … 7 segment led 0.5 “, optional 1” display.

The PI - 100 D series is a compact sized Process Indicator, designed to accept input from any two wire or four wire Transmitter. It has a seven segment, ½”, bright LED Display to read the Process Value in terms of Engineering Units or percent as is desired. The alarms can be set anywhere from 0% to 100 % with both High or both Low or one High and one Low configuration. The Output , 4-20 mA proportional to PV is isolated from input and power connections   ADVANTAGES : • Compact in Size • Field Programmable Parameters. • Linear/ Square Root operation programmable. • 4 Digit Display available to monitor Process parameter • Value from -9999 to 9999. • Isolated 4-20mAD.C. output proportional to Process Variable. Process Indicator with Alarms, PI-100 series • Adjustable Two Alarm Settings with various options of Operation. • Transmitter Supply 24 Vdc suitable for • 2 wire as well as 4 wire Transmitter.   • Serial Interface with Computer through MODBUS RTU.

Microprocessor Based Process Indicator MIEPL make Microprocessor based Process Indicators / Controllers, these instruments are used in all type of industries like : Sugar, Fertilizer, Chemical, cement, Power Plants, Food industries, Pharmaceuticals & other process industries and OEM's. These are manufactured at our state of art manufacturing facility and tested as per various National/International Standard; ensuring realiability, consistency and quality to our valuable customers.

The Selec PIC101 Process Indicators / Multifunction indicator suitable for process values indications and alarms in operation of equipment, machinery, systems or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal(Scalable). Selectable temperature unit: °C / °F. Versions are available with relay and analogue outputs which can be configured. The process indicator are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270V AC.   Features Input: J, K, T, R, S RTD: PT100 Linear mV: -5 to 56 mV Current: 0 / 4 to 20 mA Voltage: 0 to 10V DC 24V DC sensor supply Selectable temperature unit - °C / °F 85 to 270V AC/DC supply voltage

Universal Input Process Indicators PC Communication – RS232 / RS485 MODBUS RTU Protocol(Optional) Available in 3 / 4 / 5 digits 3” / 0.5”/ 1”/ 2”/ 4” 7 – segment RED display Accuracy better than ± 0.25% FSD 24V DC Transmitter Power Supply Retransmission output (Optional) 2 / 4 programmable Alarm contacts Fully configurable through front keypad

 We proudly present ourselves as an esteemed manufacturer and supplier of Digital Process Indicators located in Hyderabad, Telangana. Acclaimed for their efficiency and authenticity, the Digital Process Indicators we manufacture can be used for all types of electronic components. Made from raw material sourced from highly reliable vendors, we offer the best quality Digital Process Indicators. These Digital Process Indicators come with Built-in Cold Junction compensations and three wire lead resistance compensation which makes it a highly-precise and stable Indicator. Features : Built-in Cold Junction compensation & three wire lead resistance compensation Linearisation for PMOO & T/Cs Rugged DIN standard enclosure