Alloy Steel Pipe Dealers in Bhuleshwar, Mumbai

We are counted among the successful Manufacturers, Exporters and Suppliers of ASTM A335 P11 Alloy Steel Pipes. These are suitable for bending, flanging, and similar forming operations, and for fusion welding. We hold the expertise to deliver bulk orders of these owing to our excellent logistics network. Details : ASTM A335 P5 is the part of ASTM A335, The pipe shall be suitable for The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of ASTM A335 P5 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Outer Dimensions : 19.05mm – 114.3mm Wall Thickness : 2.0mm – 14 mm Length : max 16000mm Packing : Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthily delivery or as requested. Inspection and Test : Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface Treatment : Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture : Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified : Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. Notes for Hardness Test : P11 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. Notes for Bend Test : For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser. The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

We offer a wide range of premium quality Alloy Steel Pipes. These Alloy Steel Pipes are manufactured using the highest-grade Alloy Steel. We procure these Alloy Steel Pipes from some of the most reputed vendors who manufacture the entire range in accordance with the set industrial standards. These Alloy Steel Pipes are rigidly made and tested by experts to assure that they are durable, corrosion resistant, and sturdy. Clients can avail the Alloy Steel Pipes from us varied Outer Diameters, thicknesses, dimensions and types at the market leading prices.

  Alloy Steel IBR Tubes which are supplied by us are manufactured by the top quality of raw material. These products are presented in different shape and sizes and they are applicable both for engineering and industrial purpose. We manufacture these products using the modern machines and investigate the quality of the products before they are supplied to our clients to ensure that we are providing the high grade products to our clients.         Features :     High dimensional accuracy. Sturdy construction. Corrosion resistant.

We are offering alloy steel pipes,silver tubes provide a wide range of carbon and alloy steel pipes that is used in different industries for multiple usages. These highly reliable alloy steel pipes and carbon steel pipes are appreciated for their sturdy construction and long lasting functionality. Available in different sizes and specifications, these pipes are offered to our clients at most competitive prices. The standards and grades of these pipes are as follows: carbon steel astm asme a 53 gr. A & b, astm a 106 gr. A, b & c. Api 5l gr. B, api 5l x 42, x60, x65, x70, astm a333 gr.6 alloy steel astm asme a 335 grp 1, p 5, p 9, p 11, p 12, p 22, p 23, p 91 mild steel & galvanized (gi) is 1239 is 3589 (fe 330 fe 410)

We offer alloy steel seamless pipes & tubes. for over more than 40 year , sangeeta metal corporationis one of the leadingmanufacturer ,exporter and supplier of stainless steel pipe and pipe fitting in a variety of grade including 304 310 316 316l, nickel alloys& other specialty alloys for corrosion, heat resisting and other application. We are one shop for nickel alloys for the requirement in pipes, plate, sheets, rods, wires, nickel & other ferrous & nonferrous metal in all shapes, fitting and flanges. sangeeta metal corporation is a multi-location, multi-product company, in india, we are manufacturing of stainless steel pipe and pipe fitting in a variety of grade including 304 310 316 316l. we are looking enquiries fromgulf, brazil , russia and african countries. our reputed client is spread across various counties like u.k. And u.s.a., u.a.e and middle east. Alloy steel seamless pipes & tubes specifications for pipes grade :- p-1, p-5, p-9, p-11, p-12, p-21, p-22, p-91 od:12"---24" wt:sch10 --sch160 standard: astm specifications for tubes od: 6mmod to 214.3mm od wt: 1mm thk to 80mm thk standard: astm sa material uses : astm a213 ——seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes astm a335 ——seamless ferritic alloy-steel pipe for high-temperature service

We are Specialist of Alloy Steel pipes which are available to our clients in various grades like Alloy steel200 (UNS No. N02200), Alloy steel 201 (UNS No. N02201) and Alloy steel205 (UNS N02205). These are available in standard as well as customized lengths, thickness, sizes and dimensions as per the requirements of our clients.   Specifications :- Grades : Gr P 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91ange : ½” NB TO 24” NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75 Type : SEAMLESS / FABRICATED Length : Single Random, Double Random & Cut Length End: Plain End, Bevelled End, ThreadedAlloy Steel Pipe Standard:  ASTM / ASME A 335 Grade: Gr P 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91

Alloy Steel Pipes And Tubes find applications in petrochemical, refinery, fertilizer and pharmaceutical industry. We are an eminent Manufacturer, Supplier and Exporter of Alloy Steel Pipes And Tubes from Mumbai, Maharashtra. The Alloy Steel Pipes And Tubes that we offer can withstand with adverse climatic conditions. Our Alloy Steel Pipes And Tubes are known for their robustness, superior performance, corrosion resistance and rugged construction.

We are offering alloy steel seamless pipes, alloy steel seamless tubes. Our alloy steel seamless pipes & tubes are used in several applications. available in dimensions : ansi b36.10grade : astm a335 gr. P1, p2, p5, p9, p11, p12, p22, p91forms : round, square, rectangular preferred due to robust designcorrosion and abrasion resistancedurability applications construction like buildingstextile industry

we provide a wide range of precisely engineered range of alloy steel pipes, fabricated from superior quality raw material. our alloy steel pipes are ideal for multiple connections of pipes. these dimensionally accurate alloy steel pipes are corrosion resistant and requires low maintenance. one can count on us for the quality rich alloy steel pipes at market leading price. attributes : engineering excellencerobust compositiontensile strengthexcellence endurance material used : carbon steel

We are Suppling a wide range of nickel pipes which are available to our clients in various grades like Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201) and Nickel 205 (UNS N02205). These are available in standard as well as customized lengths, thickness, sizes and dimensions as per the requirements of our clients.

We are one of the major suppliers of Alloy Steel Seamless Pipes & Tubes in the markets. Alloy Steel Seamless Pipes IBR are made of alloy steel have exceptional performance properties. These are generally developed for energy-related applications involving oil and gas drilling and are subjected to stresses in machine parts. Alloy Steel Tubes are also used in daily life, catering to the domestic, professional or industrial needs. Properties Sturdy buildHigh durabilityCorrosion resistantAbrasion resistantEasy to mouldEasy to installDuctile Applications IndustriesFactoriesHouseholdsChemical IndustryOil & Gas Industry

We are the optimum provider of Alloy Steel Seamless Pipes and Tubes which is manufactured by certified firms. We verify the quality of our products on several aspects and ensure our vendors apply superior resources. These high quality metal pipes are widely used in several industrial and commercial applications. Our products are economical in price and are supplied to various clients.Features: Advanced quality High sustainability Highly reliable

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. The following is a range of improved properties in alloy steels (as compared to carbon steels): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability, and hot hardness. To achieve some of these improved properties the metal may require heat treating.   OriginWe import & Stock Materials from : Europe, Japan, USA, South Africa, Korea, India, Germany, China, Taiwan, Turkey, Ukraine.Supplementary ConditionsNace MR0175/ISO3183/Nace TM0284, HIC & SSC Tested Pipes, Sour Services, Offshore Services, With Low Sulhpur

  Alloy Steel Pipe RANGE15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXSFORMSEAMLESS / ERW / WELDED IN ROUND & SQUARE .  Alloy Steel ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91 ASTM / ASME A 691 GR 1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91