Alloy Steel Pipe Dealers in Kamathipura, Mumbai

We are offering a varied range of Alloy Steel Pipes & Tubes to the clients at cost effective rates. We also cater different types of industrial sectors as per the specifications provided. At the same time we also fabricate Alloy Steel Pipes & Tubes to the clients as per their requirements. The quality that we provide to the customers is widely reckoned. Sizes Available : 1/4" NB to 44" NB seamless1/4" NB to 48" NB welded Thickness : 2.5 mm to 50 mm seamless1.5 mm to 20 mm ERW Specifications : ASTM A 213, T 11A 335, P 2, P 5, P 11 Alloy Steel Pipe : A 335 P5 A 335 P9 A 335 P11A 335 P12A 335 P22A 335 P91 Alloy Steel Tube : A 213 T5A 213 T9Alloy Steel Tube A 213 T11Alloy Steel Tube A 213 T12Alloy Steel Tube A 213 T22

We source only qualitative raw material from the reliable places only. Our professionals conduct strict quality checks as a result of which, finished products stand high on the clients' expectations. Backed by a capacious warehouse, we can easily undertake urgent and massive orders of the clients. Also, we ensure complete security of the products.   Specifications : JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant Standard: A335 Grade:P1 P2 P5 P9 P11 P12 P15 P22 P91 P92 JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant Standard:A335 Grade:P1 P2 P5 P9 P11 P12 P15 P22 P91 P92 Type: JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant Executive standards: ASTM A213/ a335 Grades: T2/T5/T9/T11/T12/T17/T21/T22/T91/T92 A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92 Size:6-840mm Thickness:1-60mm large diameter with thick wall Surface:oiled or painted black Marking:According to custommers’ requirements   Types of Packaging: Bundles (hexagonal) Wooden Boxes Crates (steel/wooden) Special crates for U-Bend tubes with each radius separated Packaging for ASTM A335 Grade P22 Alloy Steel Pipe as per customer’s requirements   ASTM A335 Grade P22 Alloy Steel Pipe Special Features: Each bundle covered with plastic for protection against extreme weather. End of ASTM A335 Grade P22 Alloy Steel Pipe protected by plastic caps. Bundles strapped with plastic strips. Each radius of U-Bend tube separated by a separator. Packaging list (laminated) placed with box/crate.

We are a major Alloy Steel Pipes Manufacturer, Exporter & Supplier based in Maharashtra, India. We offer a comprehensive range of Alloy Steel Pipes, which is checked on every stage of its production. We offer Alloy Steel Pipes which are extensively used in worldwide industries to carry water, oil, gas etc. We deliver Alloy Steel Pipes in stipulated time to achieve customer satisfaction. Shapes RoundSquareRectangular

Alloy Steel Pipes & Tubes specification Tubing Size : 1/8″NB TO 30″NB IN Specialized in : Large Diameter Size Tubing Schedule: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Tubing Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes Form : Round, Square, Rectangular, Hydraulic Etc. Length : Single Random, Double Random & Cut Length. Tubing End : Plain End, Beveled End, Treaded.

Features: Durable finish Superior performance Precision engineering Robustness Optimality Greater strength Size: 12"NB to 36"NB Seamless 12"NB to 48"NB Welded Thickness: 2.5 mm to 120 mm Seamless 1.5 to 40 mm crwwelded Specifications: ASTM AASME SA 213, T-11, T-22, T-91, SA 335, P-5, P-9, P-11, P-22, P-91

We are Suppling a wide range of nickel pipes which are available to our clients in various grades like Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201) and Nickel 205 (UNS N02205). These are available in standard as well as customized lengths, thickness, sizes and dimensions as per the requirements of our clients.

We are one of the prime manufacturers and suppliers of high grade Alloy Steel Pipes and Tubes that are highly durable and corrosion resistant. Widely appreciated for their sturdy construction, these pipes can be availed at the most nominal prices. Praised for : Dimensional accuracyEasy installationHigh durabilityCorrosion resistanceSturdy construction Applications : Building industryConstruction industry Textile industry

We are reckoned among the reliable Manufacturers, Exporters and Suppliers of ASTM A335 P5 Alloy Steel Pipes. The Steel Pipes The pipes offered by us are undergo numerous tests based on parameters like longitudinal tension test, flattening test, and hardness or bend test before the final dispatch. One can obtain these at nominal rates. Details : ASTM A335 P5 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of ASTM A335 P5 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Outer Dimensions : 19.05mm – 114.3mm Wall Thickness : 2.0mm – 14 mm Length : max 16000mm Packing : Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested. Inspection and Test : Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface Treatment : Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture : Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified : Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. Notes for Bend Test : For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser. The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

We are the noted Alloy Steel Seamless Pipes Manufacturers, Exporters, and Suppliers based in India. These pipes are widely used for several commercial construction works. Alloy Steel Seamless Pipes that we offer are manufactured using high grade alloy steel and accredited for optimum strength, corrosion resistance and precision dimension. We offer these Alloy Steel Seamless Pipes in diverse sizes and thicknesses. Moreover, we make available bulk quantities of these Alloy Steel Seamless Pipes at very reasonable rates.

We are manufacturing a wide range of Alloy Steel Pipes which are available to our clients in various grades. Alloy Steel Pipes are available in standard as well as customized lengths, thickness, sizes and dimensions as per the requirements of our clients. Range : ½" NB TO 24" NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75 Type : SEAMLESS / FABRICATED Length : Single Random, Double Random & Cut Length End : Plain End, Bevelled End, Threaded Standard : ASTM / ASME A 33 Grade : Gr P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91

We are offering rising metals and alloys is a brand name for ferrous and non ferrous metals. We have pleasure to introduce ourselves as a one of the leading stockiest, supplier and exporter of stainless steel , alloy steel , copper , brass , aluminium , phosphor bronze , gun metal , nickel and other ferrous and non ferrous metals in the shape of pipes , tubes , rods , wires , hex , square bars, sheet , plates , coils , strips and entire range of pipe fittings such as bw sw screwed forge and compression type of ferrule such as elbows , tees reducers , stub ends , flanges etc. We have a track record for the supply of stainless steel items for almost 2 decades now.

Alloy Pipe Impex, we carry a full inventory of alloy steel pipes Seamless Pipes and Tube Products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. alloy steel pipes Seamless Pipe alloy Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission. We Supply alloy steel pipes in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of alloy Steel Pipe not be used for Pressure or Fluid applications Alloy Pipe Impex specializes in alloy steel pipes and Tube with years of Experience in Manufacturing alloy steel pipes Seamless Pipes and Tube. we offer high quality, lower cost but the best service.   astm a106 alloy steel pipes seamless pipes and tubes Standard Specification for Seamless alloy steel pipes for High-Temperature Service ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless alloy steel pipes for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. Federal Steel Supply is a world leader in the supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8″ to NPS 48″, with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*. Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches. A106 PIPE SPECIFICATIONSA/SA106NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified. Process Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.Steel cast in ingots or strand cast is permissible.Hot-finished pipe need not be heat treated.Cold-drawn pipe shall be heat treated after the final cold draw pass. ASTM A53 GRADE B SEAMLESS PIPES Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.. A53 PIPE SPECIFICATIONSA/SA 53NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.   ASTM A333 GRADE 6 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless.  Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11.  Discussed herein are Grades 1, 3 and 6.   A333 PIPE SPECIFICATIONSA/SA 333NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A333 GRADE 1 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness This guide covers standard specification for several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, copper, cobalt, and molybdenum. The number of tubes in a heat-treatment lot shall be determined from the size of the tubes. The tubes shall have a hardness number that does not exceed the prescribed Rockwell and Brinell hardness values. Several grades of steel shall conform to the following tensile properties: tensile strength, yield strength, and elongation. For Grades 1, 3, 6, 7, and 9, the notch-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe, shall not be less than the prescribed values. Several mechanical tests shall be conducted, namely: flattening test; flare test (seamless tubes); flange test (welded tubes); reverse flattening test; hardness test; and impact tests. Hydrostatic or nondestructive electric test shall also be performed. Materials shall be tested for impact resistance at the prescribed temperature for the respective grades. Impact temperature reduction values shall be by any amount equal to the difference between the temperature reduction corresponding to the actual material thickness and the temperature reduction corresponding to Charpy specimen width actually tested. A334 PIPE SPECIFICATIONSA/SA 334NPS 1/4″- 2″Thickness 01 mm to 08 mm. Scope This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A179 SEAMLESS TUBES Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A179 PIPE SPECIFICATIONSA/SA 179NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.This specification covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter. Note 1—Tubing smaller in outside diameter and having a thinner wall than indicated in this specification is available. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter or with a wall thickness under 0.015 in. [0.4 mm]. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.   ASTM A192 SEAMLESS TUBES Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A192 PIPE SPECIFICATIONSA/SA 192NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service.The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. Mechanical property requirements do not apply to tubing smaller than 1/8  in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. ASTM A210 SEAMLESS TUBES Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes This specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending. A210 PIPE SPECIFICATIONSA/SA 210NPS 1/4″- 2″Thickness 01 mm to 08 mm.

Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXSForm :Seamless / Erw / Welded in Round & Square .Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B ,C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B ,C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.

We are counted among renowned Manufacturers, Exporters and Suppliers of superior-grade Alloy Steel Pipes and Tubes in Maharashtra, India. Crafted out of premium metals using the latest hydraulic presses, our Alloy Steel Pipes and Tubes retain their physical properties even under extreme conditions. We provide Alloy Steel Pipes and Tubes in different specifications and offer individually tailored solutions as well. Buyers can get Alloy Steel Pipes and Tubes from us at market leading prices.   Alloy Steel Pipes (ASTM A335 P11) : Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.Alloy Steel Pipes (ASTM A335 P12) : Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches.Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) : Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.Alloy Steel Tubes (ASME SA213 Grade T11) : Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications.ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) : ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others.Application : Petroleum, smelting, foodstuff, power, papermaking, chemical, medical equipment, aviation, boiler heat-exchanger and other field. For low and medium pressure boiler, high pressure boiler, ship, liquid service, petroleum cracking, chemical fertilizer equipment, drawing-oil-equipment and structure purposes petrochemical industry, natural industry, environmental protection, pharmaceutical chemical, food machinery, water supply, architecture boiler heat exchange, oil pipline, pipe material collar, oil natural gas, industrial gas, water, oil transportation. Alloy steel pipe Material : GB/T8162,GB/T8163, GB/T3094, ASTM A 500, ASTM A 501, ASTM A 519, JIS G3441, JIS G3444, ASTM A 53, DIN1629 and otherwise.ASTM A335 PIPES | ASTM A335 GR P5 PIPES | ASTM A335 GR P9 PIPES | ASTM A335 GR P11 PIPES | ASTM A335 GR P22 PIPES | ASTM A335 GR P91 PIPESSize Range : 1/8" - 26"Schedules : 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH

We deal in superior quality alloy steel pipes in the market. The galvanized alloy steel pipes offered by us are available in different grades and specifications in conformation to the national as well as international standards. These alloy steel pipes are endurable and drawn and expanded as per requirement. In addition to this, we are one of the prime non ferrous metal alloy steel pipes suppliers in india. Grades : - astm a 335 -p1, p2, p5, p9, p11, p12, p21, p22 & p91 etc. (with ibr test certificate) length : standard double & in cut length also. value added service : draw & expansion as per required size & lengthheat treatment bending annealed machining, etc. Test certificate : manufacturer test certificateibr test certificatelaboratory test certificate from govt. Approved lab. Specialize : ibr tubes, precision tubes, fabricated pipe (with radiography)